Molecular Sieves manufactured by GMGBC under the brand name Molsieve are in adherence to the industrial standards and certified for specified parameters. These are offered in different grades such as 3A, 4A, 5A, 13X and 13X LTG in Spherical and Cylindrical Pallet form as per customer requirement.
Molecular sieve filling machine information:
Molecular sieve diameter:0.5-0.8mm.
Filling speed:3s/1000*1000*9mm(biateral).
Aluminum strip width:6-24mm.
Maximum size:2000*2000mm.
Air pressure:0.6MPA.
Power:220V/50HZ.
Specifition of the machine:1680*1080*3050(L*W*H)mm.
Performance characteristics:
1.Adopt PLC control system,touch screen man-machine interface.
2.Can be filled with automatic bending forming aluminum frame and ordinary pin aluminum frame.
3.Filling height can be adjusted according to the size of the aluminum frame.
4.Automatic sealing of molecular sieve pore kinetic energy.
5.Molecular sieve filling automatic detection system.
6.Fillable stainless steel frame.
Zhongci Carbon Molecular Sieve takes the appearance of cylindrical black solid, contains countless 4 angstrom fine pores. It can be used to separate air into nitrogen and oxygen. In industry, CMS can concentrate nitrogen from air with PSA systems, up to 98%~99.999% N2 purity. Our CMS products have the character of large nitrogen yield capacity; high nitrogen recovery. It can meet the requirement of all types of PSA nitrogen systems. The carbon molecular sieve is widely applied in petroleum chemical industry, the heat treatment of metal, the electronic manufacture and food preservation industries.
Introduction
Chemxin molecular sieve type 4a is an alkali alumino silicate; it is the sodium form of the type a crystal structure. 4a molecular sieve has an effective pore opening of about 4 angstroms (0.4nm). Chemxin type 4a molecular sieve will adsorb most molecules with a kinetic diameter of less than 4 angstroms and exclude those larger. Such adsorbable molecules include simple gas molecules such as oxygen, nitrogen, carbon dioxyde and straight chain hydrocarbons. Branched chain hydrocarbons and aromatics are excluded.
Regeneration
Chemxin molecular sieve type 4a can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes.
To remove moisture from a 4a molecular sieve, a temperature of 250-280°c is required. A properly regenerated molecular sieve can give moisture dew points below -100°c.
The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process
Size
4a - zeolites are available in beads of 1-2 mm(10x18 mesh), 2-3 mm(8x12 mesh), 2.5-5 mm(4x8 mesh) and as powder, and in pellet 1.6mm, 3.2mm.
Attention
To avoid damp and pre-adsorption of organic before running, or must to be reactivated.
Introduction
Chemxin molecular sieve type 5a is an alkali alumino silicate; it is the calcium form of the type a crystal structure. Type 5a has an effective pore opening of 5 angstroms (0.5 nm). It will adsorb molecules with a kinetic diameter of less than 5 angstrom and exclude those larger.
It is especially suitable for psa adsorber applications where it may be used for the separation of normal- and iso- paraffins (c4 to c6 species), in psa hydrogen purification and in oxygen concentrators.
Regeneration
Chemxin molecular sieve type 5a can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes.
To remove moisture from a 5a molecular sieve, a temperature of 250-300°c is required. A properly regenerated molecular sieve can give moisture dew points below -100°c, or mercaptan or co2 levels below 2 ppm.
The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process.
Size
5a - zeolites are available in beads of 1-2 mm(10x18 mesh), 2-3 mm(8x12 mesh), 2.5-5 mm(4x8 mesh) and as powder, and in pellet 1.6mm, 3.2mm.
Attention
To avoid damp and pre-adsorption of organic before running, or must to be reactivated.
Introduction
Chemxin molecular sieve type 5a is an alkali alumino silicate; it is the calcium form of the type a crystal structure. Type 5a has an effective pore opening of 5 angstroms (0.5 nm). It will adsorb molecules with a kinetic diameter of less than 5 angstrom and exclude those larger.
It is especially suitable for psa adsorber applications where it may be used for the separation of normal- and iso- paraffins (c4 to c6 species), in psa hydrogen purification and in oxygen concentrators.
Regeneration
Chemxin molecular sieve type 5a can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes.
To remove moisture from a 5a molecular sieve, a temperature of 250-300°c is required. A properly regenerated molecular sieve can give moisture dew points below -100°c, or mercaptan or co2 levels below 2 ppm.
The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process.
Size
5a - zeolites are available in beads of 1-2 mm(10x18 mesh), 2-3 mm(8x12 mesh), 2.5-5 mm(4x8 mesh) and as powder, and in pellet 1.6mm, 3.2mm.
Carbon molecular sieves (CMS) are porous materials used for gas separation and purification. They are derived from carbonaceous precursors, such as coal, wood, or synthetic polymers, through processes like carbonization and activation. CMS possess a unique structure with a network of pores and channels that allow them to selectively adsorb molecules based on their size and shape. Product details :- Packaging (Plastic Drums) : 40 / 137 Kgs Purity : 99.99% Size : 1.6 - 2.1 mm Shape : Spheres/ Pellets Grade : CMS-3KP-175 Make : CARBOTECH INDIA
Carbon molecular sieves (CMS) are porous materials used for gas separation and purification. They are derived from carbonaceous precursors, such as coal, wood, or synthetic polymers, through processes like carbonization and activation. CMS possess a unique structure with a network of pores and channels that allow them to selectively adsorb molecules based on their size and shape.
Desicca Chemical is a leading supplier of molecular sieves 3A in Mumbai. we offers molecular sieves 3A products, including beads, pellets, and extrudates. Molecular sieves 3A are typically used in applications where it is important to remove moisture from a gas or liquid stream.
Carbon Molecular Sieve
Packageï¼?20kg / 40KG plastic drum
Bulk Densityï¼? 680-700 g/L
Adsorption Cycleï¼? 2*60s
Appearanceï¼?Black
Description: CMS is mainly composed of element carbon.
Application: Used to separate N2 and O2 in the air in the PSA system
Carbon Molecular Sieves is a new non-polar adsorbent in the PSA nitrogen generator, can adsorb oxygen molecules at the normal temperature, and thus available to get the abundant nitrogen, and its principle is to use screening to achieve the separation of oxygen, nitrogen purpose.
The most striking characteristics of Carbon Molecular Sieve is: less impurity in N2 products, N2 purity and volume can be adjusted as needed and can be obtained by refining O2 content of less than 5PPM.
Description:
3A Molecular Sieve is the potassium form of the type A crystal structure. It has an effective pore opening of about 3 angstroms(0.3nm). This is large enough to allow in moisture, but excludes molecules such as unsaturated hydrocarbons which can potentially form polymers.
Chemical Molecular Formula:
0.4K2O0.6Na2OAl2O32SiO24.5H2O. (SiO2 : Al2O3 2).
Application:
Dry of air
Natural gas dehyration
Liquid alcohol drying.
Crack gas drying
Drying of unsaturated hydrocarbons(e.g. ethylene,propylene,butadien)
Drying of CNG
Specification
Model Product name Configuration Quantity
AG-MSO3Y-1 Oxygen generator
(Medical molecular sieve oxygen production system)
3 cubic single unit Screw air compressor 1 Set
Medical molecular sieve oxygen system
Oxygen tank
AG-MSO10Y-2 Oxygen generator
(Medical molecular sieve oxygen production system)
10 cubic twin unit Screw air compressor 1 Set
Medical molecular sieve oxygen system
Oxygen tank
AG-MSO30Y-1 Oxygen generator
(Medical molecular sieve oxygen production system)
30 cubic single unit Screw air compressor 1 Set
Medical molecular sieve oxygen system
Oxygen tank
The component of carbon molecular sieve (CMS) is carbon. CMS takes the appearance of cylindrical black solid, contains countless 4 angstrom fine pores, it can be used to separate air into nitrogen and oxygen .In industry, CMS can concentrate nitrogen from air with PSA systems. Our CMS products have the character of large nitrogen yield capacity; high nitrogen recovery. It can meet the requirement of all types of PSA nitrogen systems.
The carbon molecular sieve is widely applied in petroleum chemical industry, the heat treatment of metal, the electronic manufacture and food preservation industries.
Physical properties
Cylindrical Diameter: 1.3mm 1.6mm 2.2mm
Bulk Density: 640-660g/ml
Crushing Strength: 100N/p Min
Dust level: 100PPM Max
Typical Application CMS takes the appearance of cylindrical black solid, contains countless 4 angstrom fine pores, it can be used to separate air into nitrogen and oxygen .In industry, CMS can concentrate nitrogen from air with PSA systems. Our CMS products have the character of large nitrogen yield capacity; high nitrogen recovery. It can meet the requirement of all types of PSA nitrogen systems.
The carbon molecular sieve is widely applied in petroleum chemical industry, the heat treatment of metal, the electronic manufacture and food preservation industries.
Package : Plastic drum
MOQ: 500 KG
Payment Terms: T/T; L/C; PayPal; West Union
Warranty: a) shelf time: >3years
b) Offer lifetime consultation on problems occurred
Container 20GP 40GP Sample order
Quantity 10.8 MT 21.6 MT < 5kg
Delivery Time 5 days 10 days Stock available
Service scope
The following merits of service:
High ratio performence&price, reducing investment cost and operation cost.
Large hardness, little ash, long service life, uniform particles which protests air current impact.
Stable quality: Testing strictly according to 100% standard of production and ex-factory testing management.
The resin uses in producing the high pure nitrogen with good performance which substitutes the similar import products.
Three guarantees
1. 3A/4A/5A/13X molecular sieve;
2. PSA/VPSA oxygen enrichment and high performance Lithium molecular sieve;
3. Binderless 5A moelcular sieve for hydrogen purification;
4. JLOX-300, a UOP APG-III molecular sieve for cryogenic air separation, more energy than 13X-APG;
5. Activated alumina.
6. Synthetic zeolite powder: 3A/4A/5A/13X/MSX-takes 50% China market;
7. Activated zeolite powder for polyurethane moisture scavenger;
8. XH series for refrigerant;
9. Molecular sieve for Air Brake System;
Beta zeolite,having a unique three-dimensional 12-membered ring cross channel structure,is composed by mixing two polycrystals which are closely related to each other in the structure,and the two polycrystals are composed of the tetrahedral structure units which are symmetric based on the same center and arranged according to the layer.The two structures are composed of the tertiary structure units(TBU)which are symmetric based on the same center,wherein these TBUs are arranged in layer and subsequently connected in the form of left hand and right hand,This connection causes the twist along the channel of the direction C.
Beta zeolite shows an excellent catalytic performance in catalytic cracking,hydrocracking,hydroisomerization,hydrodewaxing,aromatics alkylation,olefin hydration,olefin etherification and other petroleum refining and petrochemical processes.
The varieties for the typical products of Beta Zeolite produced by JiuLong Chemical Co.,Ltd.are listed as follows,and the other products of this series also can be produced according to the requirements of the user:
Detailed Product Description
SiO2/Al2O3: 40 Color: White Powder
Cation: Sodium SiO2/Al203: 25
SO4: 0.4 Cl-: 90ppm
D50: 7um
β molecular sieves have three mutually intersecting 12-ring channels, it is only 12 yuan a three-dimensional pore structure of zeolite ring.
β zeolite having high hydrocracking, hydroisomerization catalytic activity and adsorption capacity of linear paraffins, and good resistance to sulfur and nitrogen poisoning. It can be used in the petrochemical industry of benzene with propylene olefin system cumene, cumene metathesis diisopropylbenzene, toluene Isopropylation, aromatics alkylation, transalkylation diisopropylbenzene, propylene ether, methanol aryl structured, propylene oxide and acetic ether of phenol methylation, methylation of aniline, toluene transalkylation preparation of cumene and toluene disproportionation and transalkylation reaction with a catalyst such. β-type USY zeolite used in conjunction with the increase of the octane number of gasoline. In the fine chemical industry, β zeolite has excellent activity and selectivity in the dehydration deamination.
A molecular sieve is a material with tiny, uniform pores that is used to adsorb gases and liquids. Unlike common filters, the molecular sieve operates on a molecular level. It only could adsorb molecules which are small enough to pass through the pores, such as water molecules. Because of this, the molecular sieve is usually used as a desiccant, which can adsorb water up to 22% of its own weight.
Molecular sieves often consist of aluminosilicate minerals, clays, zeolites, active carbons, synthetic compounds, etc. that have pores which small molecules can pass through. Usually, a 4 to 8 mesh sieve is ideal for gas phase applications, and a 8 to 12 mesh sieve is perfect for liquid phase applications. The powder forms of the 3A, 4A, 5A and 13X sieves are used in specialized applications.
Xiangrun is an experienced molecular sieve manufacturer in China. To ensure our customers could find the product they are looking for, we offer four types of molecular sieves, which are listed below
carton packing, drum packing
9553 Molecular Sieve Suppliers
Short on time? Let Molecular Sieve sellers contact you.
