Voltage Output Temperature and Humidity Sensor HTG3515CH
DESCRIPTION
Based on the rugged HUMIREL humidity sensor, HTG3515CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module's humidity linear voltage and direct NTC outputs. HTG3515CH is designed for high volume and demanding applications.
FEATURES
* Voltage Supply: 5 Vdc
* Nominal Output @55%RH: 2.401 - 2.559 V
* Humidity Average Sensitivity: +26 mV/%RH
* Current consumption: 1.2 mA dc
* Humidity Measuring Range: 0 - 100 %RH
* Humidity Operating Range: 0 - 100%RH
* Temperature Operating Range: -40 - 110'C
* Suitable for small bulk assembly
* Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS
* Full interchangeability. Better than +/-3%RH and +/-0.25'C
* Humidity calibrated within +/- 3% RH @ 55% RH
* Temperature measurement through NTC direct output
* Demonstrated reliability and long term stability
* Reliability not affected by repeated condensations
APPLICATIONS
* Automotive
* Home Appliance
* Printers
Description:
Based on the rugged HS1101LF humidity sensor, HTF3000LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. It features a very small size for easy, cost-effective mechanical mounting. Direct interface with a micro-controller is made possible with the module's linear frequency output.
Economic and reasonable sensor of high accuracy and quality
Compact size and slim design
Compatible plug-in module design
Various combinations of temperature and humidity outputs including passive
1)storage temperature: -40 to 125ºc
2)supply voltage: 3.8v
3)humidity operating range: 1-100%rh
4)temperature operating range: -40 to 125ºc
5)vdd to gnd:-0.3 to 3.6v
6)digital i/o pins (data/sck) to vdd:-0.3 to vdd+0.3v
7)-10 to +10 ma
Features:
(1)dfn type package
(2)relative humidity and temperature digital output, i2c interface
(3)fully calibrated
(4)lead free sensor, reflow solderable
(5)low power consumption
(6)fast response time and very low temperature coefficient
Isweek provide smoke, gas, humidity&temperature, uv, fluid or other kinds of sensors
More details welcome to inquiry: skype:isweek_laura
HTG3515CH Voltage Output Temperature and Humidity Sensor DESCRIPTION
Based on the rugged HUMIREL humidity sensor, HTG3515CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the moduleâ??s humidity linear voltage and direct NTC outputs. HTG3515CH is designed for high volume and demanding applications.
HTG3515CH Voltage Output Temperature and Humidity Sensor FEATURES
* Voltage Supply: 5 Vdc
* Nominal Output at 55%RH: 2.401~2.559 V
* Humidity Average Sensitivity: +26 mV/%RH
* Current consumption: 1.2 mA dc
* Humidity Measuring Range: 0~100 %RH
* Humidity Operating Range: 0~100%RH
* Temperature Operating Range: -40 ~110 deg C
* Suitable for small bulk assembly
* Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS
* Full interchangeability. Better than +/-3%RH and +/-0.25 deg C
* Humidity calibrated within +/- 3% RH at 55% RH
* Temperature measurement through NTC direct output
* Demonstrated reliability and long term stability
* Reliability not affected by repeated condensations
HTG3515CH Voltage Output Temperature and Humidity Sensor APPLICATIONS
* Automotive
* Home Appliance
* Printers
10058 Mhtc1A Humidity And Temperature Sensor Module Suppliers
Short on time? Let Mhtc1A Humidity And Temperature Sensor Module sellers contact you.
AM2322 Temperature and Humidity Sensor Product Overview
AM2322 The digital temperature and humidity sensor is a kind of temperature and humidity composite sensor with the output of calibrated digital signal. The special temperature and humidity collection technology is adopted to ensure the high reliability and long-term stability of the product.The sensor includes a capacitive sensing element and a high-precision integrated temperature measurement element, which is connected to a high-performance microprocessor.The product has high quality, super fast response, strong anti-interference ability and high cost performance.
AM2322 communication mode adopts single bus, standard I squared C communication mode.Standard single bus interface makes system integration easy and fast.The super small volume, extremely low power consumption, the signal transmission distance can reach up to 20 meters, making it the best choice for all kinds of applications and even the most demanding applications.The I squared C communication mode adopts standard communication timing, and the user can be directly attached to the I squared C communication bus, with no additional wiring and simple use. Two kinds of communication mode is used directly output after temperature compensation, humidity, temperature and the CRC check and other digital information, users need to secondary calculation of digital output, also need not to compensate the temperature humidity, accurate temperature and humidity information can be got.The two modes of communication are free to switch, users are free to choose, easy to use, and should be widely used.The product is 4 lead wire and convenient connection. Special packaging can be provided according to user's demand.
AM2322 Temperature and Humidity Sensor Product Features
* Super Mini Size Easy Protable
* Ultra-low voltage work
* Ultra-Low Power State
* Excellent long-term stability
* Standard And single bus output
AM2322 Temperature and Humidity Sensor Range of application
Hvac, dehumidifier, testing and inspection equipment, consumer goods, automotive, automatic control, data recorder, weather stations, household appliances, humidity control, medical, and other relative humidity control.
AM2322 Temperature and Humidity Sensor Product highlights
Completely interchangeable, the cost is low, long-term stability, relative humidity and temperature measurement, signal transmission distance long, digital signal output, accurate calibration, extremely low power consumption, standard single bus digital interface, standard I2C bus digital interface,The mode of communication is free to choose.
AM2322 Temperature and Humidity Sensor Sensor performance
* Humidity range: 0~99.9%RH
* Temperature range: -40 ~ +80'C
* Humidity Accuracy: ±2%RH
* Temperature Accuracy: ±0.3'C
* Humidity Repeatability: ±0.1%RH
* Temperature Repeatability: ±0.2'C
* Service voltage: 3.1V to 5.5V
* Output signal: single bus /IIC signal
AM2322 Temperature and Humidity Sensor Product Overview
AM2322 The digital temperature and humidity sensor is a kind of temperature and humidity composite sensor with the output of calibrated digital signal. The special temperature and humidity collection technology is adopted to ensure the high reliability and long-term stability of the product.The sensor includes a capacitive sensing element and a high-precision integrated temperature measurement element, which is connected to a high-performance microprocessor.The product has high quality, super fast response, strong anti-interference ability and high cost performance.
AM2322 communication mode adopts single bus, standard I squared C communication mode.Standard single bus interface makes system integration easy and fast.The super small volume, extremely low power consumption, the signal transmission distance can reach up to 20 meters, making it the best choice for all kinds of applications and even the most demanding applications.The I squared C communication mode adopts standard communication timing, and the user can be directly attached to the I squared C communication bus, with no additional wiring and simple use. Two kinds of communication mode is used directly output after temperature compensation, humidity, temperature and the CRC check and other digital information, users need to secondary calculation of digital output, also need not to compensate the temperature humidity, accurate temperature and humidity information can be got.The two modes of communication are free to switch, users are free to choose, easy to use, and should be widely used.The product is 4 lead wire and convenient connection. Special packaging can be provided according to user's demand.
AM2322 Temperature and Humidity Sensor Product Features
* Super Mini Size Easy Portable
* Ultra-low voltage work
* Ultra-Low Power State
* Excellent long-term stability
* Standard And single bus output
AM2322 Temperature and Humidity Sensor Range of application
Hvac, dehumidifier, testing and inspection equipment, consumer goods, automotive, automatic control, data recorder, weather stations, household appliances, humidity control, medical, and other relative humidity control.
AM2322 Temperature and Humidity Sensor Product highlights
Completely interchangeable, the cost is low, long-term stability, relative humidity and temperature measurement, signal transmission distance long, digital signal output, accurate calibration, extremely low power consumption, standard single bus digital interface, standard I2C bus digital interface,The mode of communication is free to choose.
AM2322 Temperature and Humidity Sensor Sensor performance
* Humidity range: 0~99.9%RH
* Temperature range: -40 ~ +80'C
* Humidity Accuracy: ±2%RH
* Temperature Accuracy: ±0.3'C
* Humidity Repeatability: ±0.1%RH
* Temperature Repeatability: ±0.2'C
* Service voltage: 3.1V to 5.5V
* Output signal: single bus /IIC signal
Description:
Based on the rugged HS1101LF humidity sensor, HTF3000LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. It features a very small size for easy, cost-effective mechanical mounting. Direct interface with a micro-controller is made possible with the moduleâ??s linear frequency output.
Digital Temperature Humidity Sensor HTU21D In Stock
1. digital temperature and humidity sensor
2. range:1-100%RH
3. original, high quality, competitive price
DESCRIPTION
HTU21D, the new humidity and temperature sensor of MEAS is about to set new standards in terms of size and intelligence: Embedded in a reflow solderable Dual Flat No leads (DFN) package of 3 x 3mm foot print and 1mm height it provides calibrated, linearized signals in digital, I²C format.
HTU21D sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module humidity and temperature digital outputs. HTU21D sensors are low power consumption designed for high volume and cost sensitive applications with tight space constraints.
Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip – which can be read out by command.
SC-LP-THNB / SC-LP-THLoRa wireless temperature and humidity sensor terminal is a high-precision MEMS temperature and humidity integrated sensor design based on Shanghai Digital Mining Internet of Things Technology Co., LTD. With large capacity lithium sub-battery power supply, the sensor has independent address number and low power consumption design. Make time measurement and automatically judge difference judgment, report intelligent data according to the set logical relationship, and conduct radio frequency communication (NB-IOT or LoRa).
ECO-FRIENDLY COCONUT SHELL BOW
- Ingredients: Only coconut shell and coconut oil with no paint and any chemicals. - - - - Processing process: manually trimmed and polished with sandpaper through many stages in the Big Coconut area of Vietnam, Ben Tre. Finally, cover with a layer of coconut oil on the surface to help the bowl smell black coconut fragrant. - Order laser logo printing at the FACTORY PRICE!
- DIRECTIONS FOR USE
* Before you use your coconut bowl, rinse it in water at room temperature.
* Polish your coconut bowl from time to time with coconut oil.
* Not dishwasher friendly. Wash off with soap and water. Do not soak for long time.
* Do not overheat your coconut bowl and do not use it in the microwave, oven or dishwasher.
* Do not leave the coconut bowl in a place with high humidity, so keep in a cool dry place before storing in the refrigerator.
- Ingredients: Only coconut shell and coconut oil with no paint and any chemicals. - - - - Processing process: manually trimmed and polished with sandpaper through many stages in the Big Coconut area of Vietnam, Ben Tre. Finally, cover with a layer of coconut oil on the surface to help the bowl smell black coconut fragrant. - Order laser logo printing at the FACTORY PRICE!
- DIRECTIONS FOR USE
* Before you use your coconut bowl, rinse it in water at room temperature.
* Polish your coconut bowl from time to time with coconut oil.
* Not dishwasher friendly. Wash off with soap and water. Do not soak for a long time.
* Do not overheat your coconut bowl and do not use it in the microwave, oven, or dishwasher.
* Do not leave the coconut bowl in a place with high humidity, so keep it in a cool dry place before storing it in the refrigerator.
Sht20 digital temperature and humidity sensor product summary
The sht20 humidity and temperature sensor of sensirion has become an industry standard in terms of form factor and intelligence: embedded in a reflow solderable dual flat no leads (dfn) package of 3 x 3mm foot print and 1.1mm height it provides calibrated, linearized sensor signals in digital, i2c format.
The sht2x sensors contain a capacitive type humidity sensor, a band gap temperature sensor and specialized analog and digital integrated circuit - all on a single cmosens chip. This yields in an unmatched sensor performance in terms of accuracy and stability as well as minimal power consumption.
Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip which can be read out by command. Furthermore, the resolution of sht2x can be changed by command (8/12bit up to 12/14bit for rh/t) and a checksum helps to improve communication reliability.
With this set of features and the proven reliability and long-term stability, the sht2x sensors offer an outstanding performance-to-price ratio. For testing sht2x two evaluation kits ek-h4 and ek-h5 are available.
Sht20 digital temperature and humidity sensor features
* fully calibrated
* digital output, i2c interface
* low power consumption
* excellent long term stability
* dfn type package reflow solderable
Sht20 digital temperature and humidity sensor performance
Size: 3 x 3 x 1.1 mm
Output: i²c digital, pwm, sdm
Supply voltage range: 2.1 to 3.6 v
Energy consumption: 3.2µw (at 8 bit, 1 measurement / s)
Rh operating range: 0 - 100% rh
T operating range: -40 to +125'c (-40 to +257'f)
Rh response time: 8 sec (tau 63%)
Sht21 digital humidity and temperature sensor product summary
The sht21 humidity and temperature sensor of sensirion has become an industry standard in terms of form factor and intelligence: embedded in a reflow solderable dual flat no leads (dfn) package of 3 x 3mm foot print and 1.1mm height it provides calibrated, linearized sensor signals in digital, i2c format.
The sht2x sensors contain a capacitive type humidity sensor, a band gap temperature sensor and specialized analog and digital integrated circuit all on a single cmosens chip. This yields in an unmatched sensor performance in terms of accuracy and stability as well as minimal power consumption.
Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip - which can be read out by command. Furthermore, the resolution of sht2x can be changed by command (8/12bit up to 12/14bit for rh/t) and a checksum helps to improve communication reliability.
With this set of features and the proven reliability and long-term stability, the sht2x sensors offer an outstanding performance-to-price ratio. For testing sht2x two evaluation kits ek-h4 and ek-h5 are available.
Sht21 digital humidity and temperature sensor features
* fully calibrated
* digital output, i2c interface
* low power consumption
* excellent long term stability
* dfn type package - reflow solderable
Sht21 digital humidity and temperature sensor performance
Size: 3 x 3 x 1.1 mm
Output: iâ²c digital, pwm, sdm
Supply voltage range: 2.1 to 3.6 v
Energy consumption: 3.2âµw (at 8 bit, 1 measurement / s)
Rh operating range: 0 - 100% rh
T operating range: -40 to +125'c (-40 to +257'f)
Rh response time: 8 sec (tau 63%)
Digital relative humidity and temperature sensor htu20d description
Htu20d(f), is a new digital humidity sensor with temperature output of meas. Setting new standards in terms of size and intelligence, it is embedded in a reflow solderable dual flat no leads (dfn) package with a small 3 x 3 x 0.9 mm foot print. This sensor provides calibrated, linearized signals in digital, i2c format.
Htu20d(f) digital humidity sensors are dedicated humidity and temperature plug and play transducers for oem applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module for humidity and temperature digital outputs. These low power sensor are designed for high volume and cost sensitive applications with tight space constraints.
Digital relative humidity and temperature sensor htu20d features
* full interchangeability with no calibration required in standard conditions
* instantaneous desaturation after long periods in saturation phase
* compatible with automatized assembly processes, including pb free and reflow processes
* individual marking for compliance to stringent traceability requirements
Digital relative humidity and temperature sensor htu20d applications
* home appliance
* medical
* printers
* humidifier
* multimedia: smartphone, tablet,
Digital Humidity Sensor with the interface to MCU is I2C HTU21D
Model Number: HTU21D
1.Features:
· DFN type package
· Relative Humidity and Temperature Digital Output, I²C interface
· Fully calibrated
· Lead free sensor, reflow solderable
· Low power consumption
· Fast response time and very low temperature coefficient
2.Description
HTU21D, the new humidity and temperature sensor of MEAS is about to set new standards in terms of size and
intelligence: Embedded in a reflow solderable Dual Flat No leads (DFN) package of 3 x 3mm foot print and 1mm
height it provides calibrated, linearized signals in digital, I²C format.
HTU21D sensors are dedicated humidity and temperature plug and play transducers for OEM applications
where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible
with the module humidity and temperature digital outputs. HTU21D sensors are low power consumption
designed for high volume and cost sensitive applications with tight space constraints.
Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic
identification code is stored on the chip – which can be read out by command. Furthermore, the resolution of
HTU21D sensor can be changed by command (8/12bit up to 12/14bit for RH/T), low battery can be detected and
a checksum improves communication reliability.
With made improvements and the miniaturization of the sensor the performance-to-price ratio has been
improved – and eventually, any device should benefit from the cutting edge energy saving operation mode.
3.Description
.Full interchangeability with no calibration required
in standard conditions
· Instantaneous desaturation after long periods in
saturation phase
· Compatible with automatized assembly processes,
including Pb free and reflow processes
. Individual marking for compliance to stringent
traceability requirements
4 APPLICATIONS
· Printers
· Humidifier
· Automotive
· Home Appliance
· Medical
Digital temperature and humidity sensor htu21d pcba
Description
Htu21d pcba, the new humidity and temperature sensor of meas is about to set new standards in terms of size and intelligence: embedded in a reflow solderable dual flat no leads (dfn) package of 3 x 3mm foot print and 1mm height it provides calibrated, linearized signals in digital, i²c format.
Htu21d pcbasensors are dedicated humidity and temperature plug and play transducers for oem applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module humidity and temperature digital outputs. Htu21d pcba sensors are low power consumption designed for high volume and cost sensitive applications with tight space constraints.
Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip – which can be read out by command.
Furthermore, the resolution of htu21d pcba sensor can be changed by command (8/12bit up to 12/14bit for rh/t), low battery can be detected and a checksum improves communication reliability.
With made improvements and the miniaturization of the sensor the performance-to-price ratio has beenimproved – and eventually, any device should benefit from the cutting edge energy saving operation mode.
Parameters:
1)storage temperature: -40 to 125ºc
2)supply voltage: 3.8v
3)humidity operating range: 1-100%rh
4)temperature operating range: -40 to 125ºc
5)vdd to gnd:-0.3 to 3.6v
6)digital i/o pins (data/sck) to vdd:-0.3 to vdd+0.3v
7)-10 to +10 ma
Features:
(1)pcba type package
(2)relative humidity and temperature digital output, i2c interface
(3)fully calibrated
(4)lead free sensor, reflow solderable
(5)low power consumption
(6)fast response time and very low temperature coefficient
PPE material (called Polyphenylene Ether). PPE resin, exhibits low moisture absorption due to its inherent composition. Therefore, good electrical insulation properties will be achieved under temperature and humidity conditions. Chemical reaction from water, most salts, acids and bases is also minimal with PPE material.
MATERIAL: PPE regrind black
CATEGORY: PPE
TYPE: regrind
GRADE: black
SPECIFICATION: Grade V-0, engineering plastic
Origin: Japan
LOADING WEIGHT: 25 Ton
FOB (USD/Ton): 900$ - 1000$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
PPE Plastic Provides:
Good electrical insulation properties
Long term dimensional stability
Outstanding impact resistance
Light-weight
Heat resistance
Good hydrolysis stability
SHT20 Digital Temperature and Humidity Sensor Product Summary
The SHT20 humidity and temperature sensor of Sensirion has become an industry standard in terms of form factor and intelligence: Embedded in a reflow solderable Dual Flat No leads (DFN) package of 3 x 3mm foot print and 1.1mm height it provides calibrated, linearized sensor signals in digital, I2C format.
SHT20 Digital Temperature and Humidity Sensor FEATURES
* Fully calibrated
* Digital output, I2C interface
* Low power consumption
* Excellent long term stability
* DFN type package - reflow solderable
Temperature and moisture detectors are of paramount importance across multiple sectors, encompassing the realms of ecological surveillance, farming, HVAC mechanisms, and industrial production methods. These sensors require protection from external factors such as dust, moisture, and temperature fluctuations to ensure accurate and reliable measurements.
Parameters
Brand: TOPTITECH
Size: Dia14*27H
Pore size:30microns
Application: temperature and humidity sensor protection cover
Features
High Porosity: Porous Ti elements exhibit a high degree of porosity, which allows for excellent permeability to air and moisture. The interconnected network of small pores enables the ingress and egress of gases while providing a physical barrier against larger particles. This feature ensures efficient ventilation and prevents the accumulation of moisture or contaminants on the sensor surface.
Thermal Stability: Titanium is renowned for its exceptional thermal stability. Porous Ti elements can withstand a wide range of temperatures without experiencing significant structural changes or degradation. This property is especially crucial for temperature sensors, as it ensures the protection cover can endure extreme conditions without affecting the sensor's performance.
Corrosion Resistance: Titanium exhibits excellent corrosion resistance, making it an ideal material for sensor protection in humid or corrosive environments. Porous Ti elements are highly resistant to various chemicals, including acids, alkalis, and salts. This corrosion resistance extends the lifespan of the protection cover and maintains the sensor's accuracy and reliability over time.
Lightweight and Durable: Porous Ti elements are lightweight yet durable, providing a balance between mechanical strength and weight reduction. Their low density makes them suitable for applications where weight is a concern, such as aerospace or portable sensor devices. Additionally, the robust nature of porous Ti ensures longevity, reducing the need for frequent maintenance or replacement.
Applications
Environmental Monitoring: Temperature and humidity sensors used in environmental monitoring systems are often exposed to outdoor conditions.
Agricultural Industry: In agriculture, temperature and humidity sensors play a vital role in optimizing crop growth and preventing diseases.
HVAC Systems: Heating, ventilation, and air conditioning (HVAC) systems rely on accurate temperature and humidity measurements to achieve optimal indoor comfort.
10058 Mhtc1A Humidity And Temperature Sensor Module Suppliers
Short on time? Let Mhtc1A Humidity And Temperature Sensor Module sellers contact you.
