50 pieces in a single tray , 20 trays / carton ,63
cartons / palette ,23 pallets /20'FCL.
- Smooth and bright without trace of scratch or shrunken signs
- The rate of inflaming is over 98%, the inferior lighters is under 0.6%
- The time of continual inflaming can reach 2 minutes
- The tank would not explode when falling down within 1.5 meters high
Carbon fish meat grill oven process:
A. special high temperature resisitant material,high heat deformation,the overall structure uses professtional plate ;
B.all into oxygen at the bottom of the damper desigh,fast burning heat rapidly ,at teh top of the air valve design,effective control of heat loss;
C. origianl putty separation technology,completely avoiding using process because of the putty mixed soot and open flame,ensure clean,health and safety ;
D.equipment applied double high temperature heat insulation material,insulation system,insulation with security,external direct touch with no hidden dangers.
Operation method:
A. all burning charcoal in the burning charcoal ,open at the top the smooke at the bottom of the mouth and damper;
B.charcoal burning closed 10 minutes to the degree of smoke-free smoke at the top of the mouth,the heat;
C.after the temperature reaches the standard,in the baking objects to buy object ;
D.5-10minutes,bake fish until brown on both sides,are taken from the furnace, the plate feeding .
Equipment advantages :
A. unique design principle ,the use of charcoal smoke all gathered in the grilled fish inside furnace,through the top of the exhaust pipe directly emitted;
B.rapid heat,guarantee the production speed,let the charcoal furnace cavity fully burning rapied heating up,wind valve,and through the top to the bottom of the design of air supply outlet temperature in the furnace in a 300-350 degree,put the fish in the distribution on the stove on content cabinet ,only 8-10 minutes can be produced;
C. a novel view and admire a gender ,the design of the gear type appeared in front of customers,the grilled fish process more transparent,more ornamental ,fish and clients directly face to face "communication " ;
D this design flexibility ,the real achieve a multi-purpose furnace, can bakering chicken duck cattle and sheep for equipment use diversification more rich .
Fuel: dual-use carbon box ,burning charcoal or alcohol (vegetable oil ) ,pump design.
Installation and commissioning
Overall production : have direct admission requiements,no installation commissioning ,one pace reachs the designated position .
1.Solve the smoke problem charcoal grilled fish
we are familiar with most of the fish appeared in the night street food stalls ,a rectangular fish furnace ,a big fan, the air is filled with smoke smell fish .
Function
Gas mask Can prevent various organic gases, such as formaldehyde, gasoline, ether, suitable for spray paint, oil, machinery, polishing, dust and other workplaces
A.The full face gas mask made by high grade silica gel, endure the aging , avoiding allergy, durable , easy to clean.
B. Double-folded the silica gel structure enhanced air tightness and face fitness
C. The dual headphone with adjustable straps design more comfortable to wear
D. Push type and replaceable cartridge
E. The unique audio device, allowing you to disseminate the messages more clear.
F-Large valve disc breathing valve design,breathing resistance is small,let the wearer enjoy smooth breathing.
G.Double filtration box filtration, double filtration area, low breathing resistance -The universal installation structure can be
separately anti-virus or dust-free, and can be easily switched. -Military active carbon with
large adsorption capacity and high
Strength -Double filtration agent has long service life Half Face Gas Mask is composed of the body of mask, the cartridge, Inhale
and exhale valves, headbands. -It is designed for painting and organic vapor protective (95% effectiveness) -
The mask can be taken off and hanged on the neck during rest time. - Replacement parts available, filters sold separately.
Type Sponge Iron
Material Pure Iron
Color Bright Grey
Packaging Loose
Ash Content 5%
moisture 5%
Ash 1 % Max
Application Melting Purpose in steel industry
Form Granules
Features Accurate composition
Speciality Best quality
Additional Information
Product Code 72031000
Min. Order Quantity 50 Metric Ton
Port Hazira
Payment Terms L/C
Delivery Time Immediate
Packaging Details loose form
Sale offer ( HBI SPONGE IRON FINES ) This material generate from gas based plant no S,C,P.
Fe-T 69-72 and Fe-M 60+-2%
6886 Gas Stove Qgc 201 Dmp C Suppliers
Short on time? Let Gas Stove Qgc 201 Dmp C sellers contact you.
PRODUCT DATA SHEET ACID RESISTANT BRICK
Material : FIRECLAY Type Acid Resistant Brick
Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK)
Specification : ASTM C279, ASTM C410, IS 4860-1982
DESCRIPTION :
* We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required.
FEATURES OF ACID RESISTANT BRICK:
* Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature
AREA OF APPLICATION:
Chemical Analysis (Average)
Acid and Alkali Storage Tank Farms
Demineralization plants and Water treatment plants
Chimney inside lining, FGD linings
Towers and Columns
Process Vessels and Tanks
Sewerage Treatment Plants and Lines
Industrial Flooring and Bund Areas
Chimney and Flue Gas Linings
Hoppers and Chutes
SiO266.4
Al2 0324
TiO21.1
Fe2 O31.1
K2 O + Na2 O2.5
NOT RECOMMENDED:
HF acid or other fluoride solutions - Heavy thermal shock
Characteristic
Fireclay Type Acid Resistant Brick - Test Standard
Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20
Water Absorption, % - 0.1 to 1.8 ASTM C-20
Apparent Porosity, % - 4.05 to 4.14 ASTM C-20
Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279
Modulus of Rupture, Mpa - 14.6 ASTM C-67
Compressive Strength, PSI - 15500 to 17250 ASTM C-67
Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102
Surface Hardness, MOHS Scale - 7
Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236
Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
PRODUCT DATA SHEET ACID RESISTANT BRICK
Material : RED SHALE Type Acid Resistant Brick
Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK)
Specification : ASTM C279, ASTM C410, IS 4860-1982
DESCRIPTION :
We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required.
FEATURES OF ACID RESISTANT BRICK:
Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature
AREA OF APPLICATION:
Chemical Analysis (Average)
Acid and Alkali Storage Tank Farms
Demineralization plants and Water treatment plants
Chimney inside lining, FGD linings
Towers and Columns
Process Vessels and Tanks
Sewerage Treatment Plants and Lines
Industrial Flooring and Bund Areas
Chimney and Flue Gas Linings
Hoppers and Chutes
SiO266.4
Al2 0324
TiO21.1
Fe2 O31.1
K2 O + Na2 O2.5
NOT RECOMMENDED:
HF acid or other fluoride solutions
Heavy thermal shock
Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick
Characteristic
RED SHALE ACID RESISTANT BRICK
Test Standard
Bulk Density, gm/cc - 2.3 to 2.35
ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968
Apparent Porosity, % -0.5 to 1.75 S 4860
Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279
Modulus of Rupture, PSI -2133 to 3555 ASTM C-67
Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968
Abrasion Resistant , Volume in mm3 -69 to 85 EN 102
Surface Hardness, MOHS Scale - 7
This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites.
Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature.
Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts.
PREPARATION OF FURANE MORTAR :
Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life.
Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.
Petroleum products, en590 10ppm diesel, en590 diesel, jet a1, aviation fuel, jet fuel, d2 diesel, d6 diesel, petroleum coke, crude oil.Commodity trading on international markets. we provide value through the prompt supply of bulk cargo with favorable terms and safe procedures.
industries of expertise: petroleum & petroleum products, gold, metals, agriculture
5:Appearance and Properties: colorless transparent dense liquid
Products Description
Melting point
â??59 �°C(lit.)
Boiling point
101 �°C(lit.)
density
0.963 g/mL at 25 C
vapor density
>1 (vs air)
vapor pressure
<5 mm Hg ( 25 C)
refractive index
n20/D 1.377(lit.)
Fp
>270 C (518 F)
storage temp.
2-8C
form
Oily Liquid
color
Clear colorless
Specific Gravity
0.853
Odor
Odorless
Water Solubility
PRACTICALLY INSOLUBLE
PRODUCT INFO
Peteh beans (Sator) pods are medium to large in size, averaging 30-45 centimeters in length, and are long, wide, ribbon-like, and sometimes twisted in shape. The green pods grow in clusters on tall trees, and when immature, the pods are flat and almost translucent. As they mature, the seeds begin to form within the pod causing protrusions, and the pod becomes tough, hard, and vibrant green. Inside the pod, there is a cream-colored, slippery film that encases the seeds and each pod can hold 15-20 seeds. The seeds are pale green and are similar in size to almonds. Peteh beans have an unusual smell, often compared to natural gas, and are crisp, soft, and tender with a rich and pungent flavor. Peteh beans (Sator) contain fiber, iron, calcium, potassium, vitamin C, riboflavin, and thiamin.
USES
Peteh beans (Sator) are best suited for cooked applications such as roasting, stir-frying, deep-frying, and sauteing. When young, the pods do not contain fully developed seeds and can be used whole in stir-fries or consumed raw, pickled, or fried. When mature, Peteh beans must be peeled before cooking and can be boiled in coconut milk or stir-fried with shrimp, curry paste, garlic, and chilies. It can also be roasted in the pods and eaten similar to edamame. To remove the seeds, carefully use a sharp knife to cut the pod or scrape the outer layer off into a bowl. Peteh beans can be dried, causing the seeds to turn black, and stored for extended use, or the beans can be pickled in a sour brine, creating a slightly rubbery texture without the loss of flavor. Peteh beans pairs well with chilies, garlic, onions, turmeric, lemongrass, kaffir lime leaves, shrimp paste, oyster sauce, shrimp, beef, pork, or poultry, and rice. The beans will keep for a week when stored in a cool and dry place and will keep for a couple of months when fermented.
TYS2-02
1. Iron with powder coating body
2. Copper burner cap size: 55mm/70mm/90mm
Enamel burner cap size: 50mm/80mm
3. Burner: copper burner cap with stamping aluminum base
Or enamel burner cap with die-cast aluminum base
4.Galvanized grill or electrophoretic iron grill
5.Gas stove with handle and legs
6. Knobs can make black or white color
7. Easy to take.
High quality stainless steel burner and combustion chamber. Enameled combustion and exhaust chambers.7500 kcal/h capacity and %86 efficiency. 2 years guarantee and very low natural gas consumption.
Rated input: 10KW, 12KW, 14KW, 16KW, 18KW, 20KW
Rated hot water output: 5L, 6L, 7L, 8L, 9L, 10L (25 centigrade temperature rising);
Gas type: LPG, NG, Town Gas
Rated gas pressure: 2800 Pa (LPG), 2000 Pa ( NG), 1000 Pa (Town gas);
Ignition way: automatic impulse ignition by battery power or electric transformer power;
Diameter of chimney: 5 L- 8 L: 90mm, 9 L - 10L: 110 mm
Water pressure: 0.015 - 0.8 MPa
Diameter of gas connector: LPG: 9.5mm, NG: 12-15mm
Diameter of cold water connector: G1/2"
Diameter of hot water connector: G1/2"
