Diaphragm Compressor
Features of products:
1. Compressed gas is completely sealed from outside, which provides high sealing performance; the compressor of high sealing performance is specially suitable for use to compress gas in radioactive area of nuclear power plant and highly poisonous gas;
2. Owing to nonexistence of lubricant in diaphragm cavity, namely it is impossible for gas to contact any lubricant, there is no problem to compress to higher pressure the dangerous gas and oxygen, fluorinated gas and chlorine, etc;
3. Compared to the compressors of other types, gas will not be polluted by the particles produced due to abrasion of sliding parts, therefore, it is absolutely ensured the same purity of compressed gas as that of the gas when entering compressor. Therefore, it is suitable for high purity gas such as electronic gas, breathing gas and hydrogen used in fuel cell technology;
4.Diaphragm alarm device and low-pressure alarm of lubricating oil ensure safety and reliability of operation of compressor;We offer a wide variety and types of diaphragm compressors. You can install these in many different scenarios. It is possible to install the compressors in hydrogen houses between and electrolyzer and a storage system, in businesses to support their needs such as ice cream companies for hydrogenation, at farmers where they use it to produce ammonia as a fuel at the back of a wind farm or solar farm, and refineries to pressure the hydrogen before it is being used to clean up the gas or oil. There are also many applications for our H2 gas compressors.
For instance, you can also use the diaphragm compressor in green hydrogen transport applications, energy storage solutions, grid balancing, food processing, and power station cooling. We pride ourselves at ensuring that as many applications of our compressor units use renewable electricity to pressure the hydrogen.
Each of our H2 compressor units is unique. It is built to your needs all with the latest innovations in hydrogen compression, safety, and operation. We offer different hydrogen flow and pressures all set to match your storage working pressure.
We can customize hydrogen into different types of storage systems at 150bar 200 bar, 350 bar (5000 psi), 450 bar, 500 bar, 700 bar (10,000 psi), 900 bar (13,000 psi).
Complete Range of LPG & CNG Diaphragms
Diatax is manufacturing the widest range of diaphragms for application in Automotive LPG and CNG Kits for 2,3,and 4 wheelers.
Diatax is devoted to development of customised Diaphragms as per our customer needs, with more than 20 Years for manufacturing diaphragms for LPG application makes diatom the perfect partner for development of customised diaphragms in this segment.
Diatax is manufacturing diaphragm repair kit for application in LPG and CNG Reducers manufactured by the market leaders in this segment like
Tomasetto Diaphragms
Lovato Diaphragms
Landi DIaphragms
BRC Diaphragms
AG Diaphragms
Vanaz Diaphragms
Romano Diaphragms
Stag Diaphragms.
Complete Range of LPG & CNG Diaphragms
Diatax is manufacturing the widest range of diaphragms for application in Automotive LPG and CNG Kits for 2,3,and 4 wheelers.
Diatax is devoted to development of customised Diaphragms as per our customer needs, with more than 20 Years for manufacturing diaphragms for LPG application makes diatom the perfect partner for development of customised diaphragms in this segment.
Diatax is manufacturing diaphragm repair kit for application in LPG and CNG Reducers manufactured by the market leaders in this segment like
Tomasetto Diaphragms
Lovato Diaphragms
Landi DIaphragms
BRC Diaphragms
AG Diaphragms
Vanaz Diaphragms
Romano Diaphragms
Stag Diaphragms.
Diatax pump diaphragms are produced from the highest quality materials and precision molds to ensure a long service life for this â??heart valveâ?? of the diaphragm pump. Diatax rubber/fabric-reinforced and thermoplastic (TPE) pump diaphragms offer a combination of performance and economic benefits including superb flex fatigue resistance, excellent abrasion resistance, and good temperature resistance. Increased flex life results in less downtime, lower maintenance costs and lower replacement costs for the pump user. Diatax pump diaphragms have set the industry standard for years.
Our Diaphragms are suitable for -
Slurry Pumps
Dosing Pumps
Metering Pumps
Air Operated Double Diaphragm Pump (AODD Pump)
Submersible Pump
Actuators Pump
Vacuum Pump
Spray Pumps
Our size ranges from 5mm to 1500mm Diameter in various shapes as per clientâ??s requirement. Our Diaphragms have been tested up to 28 kg/cm2 working pressures and operated up to a million flex cycles.
Our speciality is to design, develop, prototype Rubber Diaphragms as per your specific requirements/service conditions.
Grades of Rubber used for different applications are Chloroprene (Neoprene), NBR (Nitrile), EPDM, Butyl, Hypalon, Silicone & Viton. These Diaphragms are suitably reinforced as per clientâ??s service and requirement with Cotton Canvas, Nylon Fibre, Polyester, Metal Mesh, Glass Fibre, Tyre cord etc.
The Grades of Rubber are offered in respect to various services i.e. Hot Water, Steam, Low permeation gases, Ozone resistance, Oil and fuel resistance, Cryogenic applications etc. Please refer our Chemical service resistance chart as well as our general-purpose polymer chart for guidance.
Why Diatax for Valve Diaphragms ?
Diatax is Manufacturing a wide range of diaphragms with customised rubber and fabric materials to serve Valve Industries.
Diaphragm are often the most critical part in a valve and thereâ??s no need to compromise on performance. Diatax provides custom designs and the longest lasting rubber compounds to outperform all competitive products.
Widest Range of Diaphragms for Valves
We manufacture Valve Diaphragms Repair Kits for applications in all major brands of valve manufacturers all over the world some of which are listed below -
Asco Type Valves
Goyen Type Valves
Saunders Type Valves
Autel Type Valves
Mecair Type Valves
Turbo Italy Type Valves
Teaha Type Valves
BFEC Type Valves
Norogren Type Valves
Join Type Valves
Diaphragm valve, which controls flow by a movement of a diaphragm. Upstream pressure, downstream pressure, or an external source (e.g., pneumatic, hydraulic, etc.) can be used to change the position of the diaphragm.
Pumps have an inlet, outlet Aluminium, and Plastic (Polypropylene) casings and they have more utilization areas in waste water treatment, chemical industry, oil&gas applications and also food&pharmacy, new energy, etc. With good performance at energy saving, low working noise, low-pressure start-up ability, etc.
Diaphragm Valves for different applications such as slurries, Viscous and corrosive substances, suspended solids and other hard to handle medium. Diaphragm Valve having rugged design incorporating the best material available is proved by maintenance free operation. A Weir Type Diaphragm valve design is very simply construction. The valve assembly has only three major parts such as Body, Bonnet & Diaphragm. In the diaphragm valve, it's also very easy to replace the rubber diaphragm without dismantling body from the line. Extra heavy duty casting affords high resistance to atmospheric corrosion. diaphragm valve reduces diaphragm travel for extended service and fine control. A wide choice is available in body materials, body rubber lining, types of operation and body end connection to satisfy the need of most industrial application. High quality standards are strictly followed, 100% valve being checked for size, design pressure, operation, Material of Construction, final finish etc.
Maniks manufactures all kind of spares for reverse-jet pulse valves used in bag filters for dust collection, used typically in cement and steel plants. These spares are compatible with valves of various makes like Maniks, etc. The diaphragms are made application-specific by manufacturing in various materials like special Imported polyester, neoprene and viton( for high temperature).
Suitable for Water , Paper , Automotive , Chemical , Power , Oil & Gas , Pharma industries
Body : CI , SGI, Cast Steel , SS , Gun metal
Diaphragm : EPDM , PTFE , Viton
Lining : Unlined and lined with PTFE , Rubber , PVDF , PFA , Plastic and Glass lining
Body type : Weir A type and KB type
Size Range : DN 15 DN 350
Temperature Range : -50 degrees to 175 degrees
Model:DDP-2
INSTALLATIONS AND USE . The pumps are compact and designed for a wide range of applications including liquid transfer, spraying , circulation, filtration and dispensing. . This compact automatic demand water system pump has a builtâ?�in pressure switch, which automatically starts and stops the
Seltec FZC is an authorized distributor of Fluimac diaphragm pumps in the UAE, offering a comprehensive range of air-operated double diaphragm (AODD) pumps suitable for various industrial applications.
Product Offerings:
Pneumatic Diaphragm Pumps: Designed to handle a wide range of fluids, these pumps are known for their efficiency and durability.
FDA Pneumatic Diaphragm Pumps: Ideal for the food and cosmetics industries, these pumps are constructed with FDA-certified materials, ensuring safety and compliance.
Key Features:
Material Construction: Pumps are available in materials like polypropylene and PVDF, catering to various chemical applications.
Performance: Equipped with high-efficiency motors and designed to prevent cavitation, ensuring reliable operation.
diaphragm KS100ZXNO16 BQ12 SNOERH
Dongfang Yoyik has been focused on machinery and industry equipment for a long time. The company advocates "professional, pragmatic, efficient and innovative" spirit, with a good internal mechanism. Excellent working environment and good incentive mechanism attract a group of high-quality, high level, high efficiency of talented staffs. We have a technical research and development strength and mature after-sales service team. Look forward to working with you as soon as possible.
#DF-diaphragm KS100ZXNO16 BQ12 SNOERH-DF
resistance converter DTS125L-Pt100.3W.60 Pt100
Pressure Switch 6L-EE5-N4-C2A-YY
Bolt electric heating rod ZJ-22-19
pt rh thermocouple TE-404
magnetic limit switch sensor WT0122-A90-B00-C01
LVDT Sensor 2000TDGN-15-01
Eddy Current Sensor PR6422/100-021
Frequency transducer WBF154S01
Control circuit board APF7.820.117A-A
steam drum level transmitter UHZ-519C, Length: 5200mm
LVDT Sensor CCC9.231.114
Remote Bimetal Thermometer WSSY-411
thermometer controller WTYY-1021
Resistance capacitance absorption module ZKE-DJZ03(380)-02B
DIFFUSION TUBING HYDRAZINE A-82250100
differential pressure indicator switch 3051TG1A2B21AB4M5Q4
resistive linear position sensor TDZ-1-25
THERMOCOUPLE,DUAL WRNK2-73
Eddy Current Sensor PR6422/002-120
Electric heating rod ZJ-22-33
speed sensor A5S05T90-10m
CPU card PCA-6740
LVDT Sensor TD-1N-1000-15
Eddy Current Sensor PR6422/000-120
Eddy Current Sensor PR6422/000-041
Eddy Current Sensor PR6422/100-010
CIO Input/Output Card PC D235
lvit sensor TD-1100S
Linear variable differential transformer LVDT for valve CV TDZ-1G-03
converter A1 I/F
Module ID Fan PSM 692U
sensor SDJ-SC-2H
sensor pr6423/015-140 + con021
Differential expansion probe RS900851-02-000-060-50-00-05
Bolt electric heating rod ZJ-16.5-12
dp sensor CS-IIIC
diaphragm KS100ZXNO16 BQ12 SNOERH
The model CSP201 diaphragm seal has been developed for use in pulp manufacturing or waste-paper processing applications. Mounting of the diaphragm seal to the measuring instrument may be made via a direct connection and for higher temperatures via
a cooling element or via a flexible capillary. Optionally, there are pipe elbows and vibration dampers available. For the material
selection Radix offers a variety of solutions, in which the upper body of the diaphragm seal and the wetted parts can be made of
identical or different materials. The wetted parts can, as an alternative, be coated.
Excavator Hydraulic Rock Breaker Diaphragm for Furukawa, Atlas Copco, Indus, Daemo, Soosan, Hammer & Various other series, Best Quality Hydraulic Rock Breaker Diaphragm Available in Tamil Nadu
All Type Hydraulic Rock Breaker Machine Spare Parts Available. JCB Breaker,Atlas Copco Breaker, Furukawa Breaker, Daemo Breaker, Soosan Breaker, General Breaker, Fine Rock Breaker, NPK Breaker, Volvo Breaker, Hammer Breaker, Krupp Breaker, Indus Rock Breaker, Dowin Rock Breaker, Vainav Rock Breaker spare parts Available
We produce all kinds of Hydraulic Rock Breaker Spare Parts, such as Chisels, Through Bolt, Wear Bushes, Pistons, Diaphragm, Front Head, Back Head, Rod Pin/Biscuit Lock, Nitrogen Gas Charging Kit, Nitrogen Gas Cylinder, Seal Kits, Control valve, Accumulator and etc. Our products match for All type Rock Breakers
For the special prices, all of can contact with email.
It can be used with original machines as original products.
Alternatives machine parts for mining machines spare parts in high quality and effortable prices.
Used as a alternative spare part for relevant machine.
Razor Spare Parts has special experince of manufacturing drilling rigs, surface and facedrill machine parts. Our products can used easily for relevant machines and easy to operate. High guality production and with using life, Razor Spare Parts products separate other firm and companies. With the first-class productions of our target products in the spare part area, we offer services with the highest quality products as well as our competitors for atlas copco, furukawa and ingersoll rand spare parts.
As Razor Spare Parts, we provide our business partners and buyers in the best way by offering many back services besides production
