* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size ¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size ¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size ¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size ¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size ¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
* Screwed, socket-weld and flanged ends
* ASME classes up to 2500
* Variety of actuation option
293 Api Shenkai Variable Bore Ram Vbr Ram Seals Suppliers
Short on time? Let Api Shenkai Variable Bore Ram Vbr Ram Seals sellers contact you.
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size ¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size ¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size ¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size ¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size �¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size ¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size �¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size �¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size �¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size �¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size ¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size ¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size ¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
API 16A LWS BOP 2FZ28-35 Pipe Ram Rubber
Product Description
Blowout preventer (BOP)
BOP is shut in the well for oil testing, workover, well completion and operating process to prevent the blowout accident, totally enclosed and semi-closed two functions into one, has a simple structure, easy to operate, resistant to high-pressure characteristics is used to prevent blowouts safety oilfield sealing wellhead.
Oil drilling, installed at the wellhead casing head, used to control the high pressure oil, gas, water blowout. Wells of oil and gas pressure is high, the BOP can be the wellhead closed (shut). The shutter has four, alternatively bullied invaded mud, increasing the pressure of the borehole fluid column, so as to suppress the high-pressure oil and gas discharged from the drill pipe is pressed into the heavy mud.
Its type sub-ordinary blowout preventer, of universal blowout preventers and rotating blowout preventer. Ordinary BOP ram with full-and semi-closure, full closure type blowout preventer can seal the entire wellhead; semi-sealed shut wellhead annular cross-section of drill pipe exists. Universal BOP can start in case of emergency to cope with any size drill and empty wells.
Parts Lake Petro supplies apply to below BOP:
Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type:Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
Working pressure:2000psi-15000psi(14 Mpa-105Mpa)
Operating temperature:-18deg--121deg
Bore size:7 1/16"-21 1/4"
Top & bottom connection:Flanged,studded
