1. Structure: there is a deposition of tungsten alloy layer on the inner and outer walls of general api standard pipes or special premium thread tubing.
2. Performance indicators
Tungsten alloy layer and backing material binding force: according to gb/t5270-2005 testing, the tungsten alloy layer does not crack or peel off.
Appearance: uniformly bright, showing silvery white
Thickness of tungsten alloy layer: 40-60£gm
Hardness of tungsten alloy layer: 560-640hv
Special premium thread tubing: hydrostatic pressure: 95mpa, load maintaining for 30 minutes, without leakage.
Gas seal: 70mpa, load maintaining for 15 minutes, without leakage.
3. Product classifications and standards
Standards of tungsten alloy anti-corrosive tubing
Product Details:
Usage/Application Industrial
Type Lap Joint Flanges
Size 1-5 inch, 0-1 inch, 20-30 inch, 5-10 inch, 10-20 inch
Material Standard ASTM A182, ANSI B16.5, ASTM A351, ASTM A105
Rated Pressure (Bar) 2500
I Deal In New Only
Material Stainless Steel
Country of Origin Made in India
We can offer vide range of Lap Joint Flanges from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. Various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Fittings, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc.
Specifications: Can offer Lap Joint Flanges as cast, forged, normalized, annealed, quenched (hardened) tempered condition with black or bright (proof machined) finish.
Various type of IBR approved Flanges that can be procured are as follows: Blind, Slp-On, Welding Neck (Weldneck), Long Welding Neck (LWN), Socket Weld, Lap Joint, Threaded, Spectacle Blind, Plate, Collar, Flat Face, Raised Face, Ring Type Joint, etc.
Size range of flanges that can be offered are �½â?? inch upto 60â?? inch depending on type, class grade of flanges.
Class of flanges: #150, #300, #400, #600, #900, #1500, #2500
Product Details
UsageApplication Industrial
Type Lap Joint Flanges
Size 15 inch 01 inch 2030 inch 510 inch 1020 inch
Material Standard ASTM A182 ANSI B165 ASTM A351 ASTM A105
Rated Pressure Bar 2500
I Deal In New Only
Material Stainless Steel
Country of Origin Made in India
Minimum Order Quantity 1 Piece
Rated Pressure Bar 150 300 400 600 900 1500 2500
We can offer vide range of Lap Joint Flanges from ready stock or on make to order basis are currently supplying to UK IranTehran Saudi Arabia Spain Bahrain Nigeria Dubai Egypt Malaysia etc Various steel products such as Angles Channels Beams Billets Blooms Round Bars Square Bars Rectangular Bars Flat Bars Forged Bars Rolled Bars Concast Bars Pipe Fittings Elbow Tee Reducer Cross Stub End End Caps Forged Stampings Pipes Tube Tubing Fasteners Bolts Nuts Washers Screws Studs Plates Sheets Coil etc
Flange Standards API 6A ANSI ASME DIN EN10921 UNI JISKS BS4504 GB AWWA C207 GOST PSI
Specifications Can offer Lap Joint Flanges as cast forged normalized annealed quenched hardened tempered condition with black or bright proof machined finish
Various type of IBR approved Flanges that can be procured are as follows Blind SlpOn Welding Neck Weldneck Long Welding Neck LWN Socket Weld Lap Joint Threaded Spectacle Blind Plate Collar Flat Face Raised Face Ring Type Joint etc
Size range of flanges that can be offered are inch upto 60 inch depending on type class grade of flanges
Class of flanges 150 300 400 600 900 1500 2500
IBR approved Flanges can be avail in various grade materials as mention below
1. Structure: there is a deposition of tungsten alloy layer on the inner and outer walls of general api standard pipes or special premium thread tubing.
2. Performance indicators
Tungsten alloy layer and backing material binding force: according to gb/t5270-2005 testing, the tungsten alloy layer does not crack or peel off.
Appearance: uniformly bright, showing silvery white
Thickness of tungsten alloy layer: 40-60£gm
Hardness of tungsten alloy layer: 560-640hv
Special premium thread tubing: hydrostatic pressure: 95mpa, load maintaining for 30 minutes, without leakage.
Gas seal: 70mpa, load maintaining for 15 minutes, without leakage.
3. Product classifications and standards
Standards of tungsten alloy anti-corrosive tubing
Standard shipping packaging as required
1313 Api Class Sm Fs Coupling Suppliers
Short on time? Let Api Class Sm Fs Coupling sellers contact you.
1. Structure: there is a deposition of tungsten alloy layer on the inner and outer walls of general api standard pipes or special premium thread tubing.
2. Performance indicators
Tungsten alloy layer and backing material binding force: according to gb/t5270-2005 testing, the tungsten alloy layer does not crack or peel off.
Appearance: uniformly bright, showing silvery white
Thickness of tungsten alloy layer: 40-60£gm
Hardness of tungsten alloy layer: 560-640hv
Special premium thread tubing: hydrostatic pressure: 95mpa, load maintaining for 30 minutes, without leakage.
Gas seal: 70mpa, load maintaining for 15 minutes, without leakage.
3. Product classifications and standards
Standards of tungsten alloy anti-corrosive tubing
1-Bromopentane is a chemical reagent used in a multitude of organic syntheses. It is used iron-catalyzed alkylations of aromatic Grignard reagents via cross coupling. It is used in the synthesis of-diketo acids as reversible inhibitors of Hepatitis C virus NS5bRNA polymerase.
Meets the requirements of:
Cummins CES 20081
MB 228.31/228.51
MAN M3677/3477/3575/3271-1
Volvo VDS-4
RVI RLD-3/RLD-2
JASO DH-2
MACK EO-N Premium Plus
MACK EO-O Premium Plus
CAT ECF-3
Detroit Diesel 93K218
MTU Oil Category 3.1/2.1
Deutz DQC-IV-10 LA
Scania LA
Scania LDF-4
Voith Class B / MB 235.28
Specifications:
API CJ-4
ACEA 2016 E4/E6/E7/E9
TECHNOL POWER LD 10W-40 is a synthetic technology engine oil that has been formulated to satisfy the most stringent requirements of on-road trucks with heavy duty diesel engines. It is also suitable for use in most gasoline engines. This engine oil protects diesel engines equipped with post-treatment systems, such as diesel particulate filters (DPF), thanks to its specific Low SAPS technology (low content in Sulphated Ash, Phosphorus, and Sulphur). This engine oil provides outstanding resistance to oxidation and corrosion, contains detergents and dispersants that keep the engine clean and possesses antirust, and antiwear properties. Its high viscosity index and thermal stability ensure proper lubrication of moving components of the engine under most severe operating conditions. With its extended drain intervals, use of this engine oil helps reduce maintenance costs. It is recommended for use in Euro 4 and Euro 5 engines of most manufacturers.
Features
Marine reduction gearbox with hydraulic clutch.
Suitable for twin engines with the same reduction ratio as forward/reverse.
Design and strict quality management according to ISO9001 standards.
Use of seawater-resistant castings.
Quiet operation with precise gearing.
Tapered roller bearing application considering maximum thrust.
Compact design, minimal appearance in its class.
Permanently available oil filter (metal) applied.
GO HOME (emergency bolt application) function.
Options
Electric control valve (12V, 24V optional)
Mechanical trolling valve
Rubber block coupling
Mounting brackets (Flat Type, Customized)
Apply to
Marine : Fishing boat, Leisure boat, Cruise
Standard supply
Mechanical control valve
Cable bracket/clamp parts.
Oil cooler/cover
Companion flange/Reamer bolts
Bell housing(Selection)
Dual stage coupling(Selection)
Features
Marine reduction gearbox with hydraulic clutch.
Suitable for twin engines with the same reduction ratio as forward/reverse.
Design and strict quality management according to ISO9001 standards.
Use of seawater resistant castings.
Quiet operation with precise gearing.
Tapered roller bearing application considering maximum thrust.
Compact design, minimal appearance in its class.
Permanently available oil filter(metal) applied.
GO HOME(emergency bolt application) function.
Options
Electric control valve(12V, 24V optional)
Mechanical trolling valve
Mounting brackets(Flat type, Customized)
CENTA Flexible coupling
Class
Apply to
Marine : Fishing boat, Leisure boat, Cruise, Ferry
Industrial : Water Pump, Sand Pump
Standard supply
Mechanical control valve
Cable bracket/clamp parts.
Oil cooler/cover
Companion flange/Reamer bolts
Bell housing (Selection)
CENTA flexible coupling
Features
Marine reduction gearbox with hydraulic clutch.
Suitable for twin engines with the same reduction ratio as forward/reverse.
Design and strict quality management according to ISO9001 standards.
Use of seawater-resistant castings.
Quiet operation with precise gearing.
Tapered roller bearing application considering maximum thrust.
Compact design, minimal appearance in its class.
Permanently available oil filter (metal) applied.
GO HOME (emergency bolt application) function.
Options
Electric control valve(12V, 24V optional)
Mechanical trolling valve
Mounting brackets (Flat type, Customized)
Class
Apply to
Marine : Fishing boat, Leisure boat, Cruise
Standard supply
Mechanical control valve
Cable bracket/clamp parts.
Oil cooler/cover
Companion flange/Reamer bolts
Bell housing(Selection)
Dual stage coupling(Selection)
Features
Marine reduction gearbox with hydraulic clutch.
Suitable for twin engines with the same reduction ratio as forward/reverse.
Design and strict quality management according to ISO9001 standards.
Use of seawater resistant castings.
Quiet operation with precise gearing.
Tapered roller bearing application considering maximum thrust.
Compact design, minimal appearance in its class.
Permanently available oil filter(metal) applied.
GO HOME(emergency bolt application) function.
Options
Electric control valve(12V, 24V optional)
Mechanical trolling valve
Mounting brackets(Flat type, Customized)
Class
1313 Api Class Sm Fs Coupling Suppliers
Short on time? Let Api Class Sm Fs Coupling sellers contact you.
