API 7K Mud Pump Parts Gasket O-Ring Packing
Product Description
Lake Petro offers a wide range of gaskets and packing materials for usage in drilling pumps.
Gaskets and packings made of polyurethane, rubber and combination of fabric and rubber.
Lake Petro has very rich experience in supplying spare parts of mud pump to the worldwide Oil Drilling industry.We stock and sell a wide selection of mud pump fluid end expendables and spares parts.
Mud pump parts for F series mud pump, For P series mud pump, For PZ series mud pump, For 3NB series mud pump.
These parts include liners, pistons, valves & seats,piston rods, rod clamps, extension rods, all
fluid end seals and gaskets, fluid cylinder modules and accessories, as well as power end
components, such as crankshaft assemblies, gear sets, connecting rods, crosshead, and bearings.
AAX Manual Tong is an essential tool in oil drilling operation to fasten or remove the screws of drill pipe and casing joint or coupling.It can be adjusted by changing latch lug jaws.
API 7K QW175 QW 205 QW 275 QW 375 Air Pneumatic Slip for rotary table
Product Description
High Quality Drill Pipe Air Slips, QW 275 Type Pneumatic Slips
QW Type Pneumatic Slip is an ideal well-head mechanized tool with double functions, it can automatically handle the drill pipe when the drilling rig is running in hole or does pipe wiping when the drilling rig is pulling out of hole. It can accommodate different kinds of drilling rig rotary table. And it features convenient installation, easy operation, complete functions, high automation, low labor intensity, and can improve the drilling speed.
Sl-swivel with spinner
Xsl-swivel with spinner is a combination of swivel and kelly spinner, driven by air motor or hydraulic motor, with keyless connection adopted between spinner and central pipe of swivel.It is designed and manufactured according to api spec 8c "specification for drilling and production hoisting equipment"
Skype: julia0402zcy
Water swivel for drilling
1.Ma.Static load:4500kn
2.Max.Rotary speed:500r/min
3.Max.Wp:35mpa
4.Id of center pipe:75mm
Water swivel for drilling
The swivel includes two main categories, which are common swivel and double duty swivel. Double duty swivel is a common swivel combined with a spinner. Common swivel consists of swivel bail, shell, support, gooseneck, central pipe, master bearing, joint and other parts. The lower end is connected with kelly stem by reg thread. The swivel bail is hung on the hook. Gooseneck and rotary hose can be connected by reg thread connection or union connection.
Washpipe packing set assembly adopts cassette structure, so it can be quickly replaced without disassembling rotary hose and gooseneck. 3lp and 4lp internal or external thread hose connection thread are available for you. We can also manufacture low temperature resistant swivel according to customer's requirements.
Our swivel meets api spec 8cpsl1 standards. It has been awarded the api certification issued by the american petroleum institute and is allowed to use api monogram.
Pneumatic spiders are designed and manufactured according to API Spec 7K for heavy or medium duty use. They are made of high alloy steel and heat treated for strength and wear resistance.
Type QQP Pneumatic Spiders are utilized to handling drill pipe and tubing in oil well repairing. This type spider can accommodate pipe from 23/8 to 5 inch, the rated load is 60-100 tons.
Manual Break Out Tong for 60mm Drill Pipe
Product Description
Lake Petro can supply all types of drilling rods such as HDD drilling rods, oil drilling rods, geological drilling rods, anchoring drilling rods and other special drilling rods, and trenchless special drilling tools such as pilot guide bits, swivels, ream bits, reducer unions,pneumatic pipe-rammer, Hydraulic & Manual power break out tong for drill pipe.
The Safety Clamp is one of the most valuable tools for well drilling. It helps guard against dropping flush-joint pipe, streamlined drill collars, etc. into the hole while making-up or breaking-out the string. It is necessary tools for drill rig while drilling operation is ongoing.
The Safety Clamp can be deviled into MP, the WA-T and WA-C type.
MP-S /MP-R /MP-M /MP-L /MP-XL
Application: Used as Flexible connection between standpipe and swivel (Rotary Drilling) or between pump and standpipe (Rotary Vibrator) for pumping mud at extra high pressures in oil drilling and natural gas exploration work (including 50D, 70D).
Temperature Range: -30�°C~ 120�°C, or manufactured upon customers' requirements
Hose Reinforcement:2~ 6 layers spiraled by single high-strength steel wire, and rubber as a binder to make the layers into one complete and sound construction
1.Description:
The mechanical-hydraulic drilling jar is a jarring and stuck releasing tool. It integrates the up jar and down jar and can release the stuck accident occurring during drilling operation. The drilling jar is an ideal tool for directional well and deep well drilling.
Operating principle
1.Operating principle of up jar
Lifting drilling tool, slip assembly which bear the acting of dish reed elastic force and slip locking force compels latch mechanism of slip clasp slip mandrel. While slip mandrel up run with mandrel to overcome slip locking force and damping action between hydraulic valve assembly and spindle extension, jar
Make drill stem accumulate energy, delay time. When mandrel up run to the state of release constraint, elastic potential energy accumulated in drill stem will convert to upward kinetic energy, generate up jar. If need sequence up jar, you need fed off drilling tool till relock latch mechanism, reduplication above process,
Generate sequence up jar.
2.Operating principle of down jar
The loosen load of down jar lock can be transfer as per in demand .There are a certain ratio between up locking force and down locking force , and the ratio is adjustable. If down jar, fed off drilling tool until pressure reach to down locking force, jar should generate down jar force. If need to repeat jar, lifting drilling tool to anew securing position repeat above process.
1.Description:
The mechanical-hydraulic drilling jar is a jarring and stuck releasing tool. It integrates the up jar and down jar and can release the stuck accident occurring during drilling operation. The drilling jar is an ideal tool for directional well and deep well drilling.
Operating principle
1.Operating principle of up jar
Lifting drilling tool, slip assembly which bear the acting of dish reed elastic force and slip locking force compels latch mechanism of slip clasp slip mandrel. While slip mandrel up run with mandrel to overcome slip locking force and damping action between hydraulic valve assembly and spindle extension, jar
Make drill stem accumulate energy, delay time. When mandrel up run to the state of release constraint, elastic potential energy accumulated in drill stem will convert to upward kinetic energy, generate up jar. If need sequence up jar, you need fed off drilling tool till relock latch mechanism, reduplication above process,
Generate sequence up jar.
2.Operating principle of down jar
The loosen load of down jar lock can be transfer as per in demand .There are a certain ratio between up locking force and down locking force , and the ratio is adjustable. If down jar, fed off drilling tool until pressure reach to down locking force, jar should generate down jar force. If need to repeat jar, lifting drilling tool to anew securing position repeat above process.
Main feature:
Drilling jar with national oilwell varco
Hydromechanical drilling jar halliborton
Operating manual double acting drilling jar
Used in geothermal drilling and wells
2. Product Description:
Drill pipe slip is a kind of handling tools specially used to handle drill pipe during the oil well drilling operations for the exploration of petroleum and natural gas. It is an essential tool for coupling and uncoupling.
There are three types of DU series Rotary Slips: DU, DUL and SDU. They are with large handling range and light weight. There into, SDU slips have larger contacting areas on the taper and higher resistance strength. They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment.
3. Features:
(1). Suitable for shallow hole drilling, medium depth drilling and deep drilling.
(2). 100% customer satisfaction for quality and reliability.
(3). After machining all slips undergo 100% inspection.
(4). Different types for clients choice for different depth well and different size drill pipe.
1. Main Technical Parameters:
(1). Model: DCS-S. Drill Collar O.D. (in): 3-4. Drill Collar O.D. (mm): 76.2-101.6.
Weight (kg): 51. Weight (lb): 112. Use in Insert Bowl No.: API or No. 3.
(2). Model: DCS-S. Drill Collar O.D. (in): 4-4 7/8. Drill Collar O.D. (mm): 101.6-123.8.
Weight (kg): 47. Weight (lb): 103. Use in Insert Bowl No.: API or No. 3.
(3). Model: DCS-R. Drill Collar O.D. (in): 4 1/2-6. Drill Collar O.D. (mm): 114.3-152.4.
Weight (kg): 54. Weight (lb): 120. Use in Insert Bowl No.: API or No. 3.
(4). Model: DCS-R. Drill Collar O.D. (in): 5 1/2-7. Drill Collar O.D. (mm): 139.7-177.8.
Weight (kg): 51. Weight (lb): 112. Use in Insert Bowl No.: API or No. 3.
(5). Model: DCS-L. Drill Collar O.D. (in): 6 3/4-8 1/4. Drill Collar O.D. (mm): 171.4-209.6.
Weight (kg): 70. Weight (lb): 154. Use in Insert Bowl No.: API or No. 3.
(6). Model: DCS-L. Drill Collar O.D. (in): 8-9 1/2. Drill Collar O.D. (mm): 203.2-241.3.
Weight (kg): 78. Weight (lb): 173. Use in Insert Bowl No.: API or No. 3.
(7). Model: DCS-L. Drill Collar O.D. (in): 8 1/2-10. Drill Collar O.D. (mm): 215.9-254.
Weight (kg): 84. Weight (lb): 185. Use in Insert Bowl No.: No. 2.
(8). Model: DCS-L. Drill Collar O.D. (in): 9 1/4-11 1/4. Drill Collar O.D. (mm): 235-285.7.
Weight (kg): 90. Weight (lb): 198. Use in Insert Bowl No.: No. 2.
(9). Model: DCS-L. Drill Collar O.D. (in): 11-12 3/4. Drill Collar O.D. (mm): 279.4-323.9.
Weight (kg): 116. Weight (lb): 256. Use in Insert Bowl No.: No. 1.
(10). Model: DCS-L. Drill Collar O.D. (in): 12-14. Drill Collar O.D. (mm): 304.8-355.6.
Weight (kg): 107. Weight (lb): 237. Use in Insert Bowl No.: No. 1.
2. Product Description:
Drill Collar Slips are specially developed to handle drill collars during well drilling.
There are three types of DCS Drill Collar Slips: S, R, and L. They can accommodate drill collars from 3 in (76.2 mm) to 14 in (355.6 mm) O.D.. The handling sizes can be adjusted by changing the quantity of inserts or slip body. They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment.
3. Features:
(1). Multi-segments design make it possible to handle different size drill collars by adjusting the quantity of inserts or slip body.
(2). 100% customer satisfaction for quality and reliability.
(3). After machining all slips undergo 100% inspection.
(4). Different types for clients choice for different depth well and different size drill pipe.
1. Main Technical Parameters:
(1). Model: Drill Collar Slips Type A. Drill Collar O.D. (in): 3-4 1/2.
Drill Collar O.D. (mm): 76.2-114.3. Use in Insert Bowl No.: API or No. 3.
(2). Model: Drill Collar Slips Type A. Drill Collar O.D. (in): 3 1/4-4 3/4.
Drill Collar O.D. (mm): 82.55-120.65. Use in Insert Bowl No.: API or No. 3.
(3). Model: Drill Collar Slips Type A. Drill Collar O.D. (in): 4 1/4-5 3/4.
Drill Collar O.D. (mm): 107.95-146.05. Use in Insert Bowl No.: API or No. 3.
(4). Model: Drill Collar Slips Type A. Drill Collar O.D. (in): 5 1/2-7.
Drill Collar O.D. (mm): 139.7-177.8. Use in Insert Bowl No.: API or No. 3.
(5). Model: Drill Collar Slips Type A. Drill Collar O.D. (in): 6 3/4-8 1/4.
Drill Collar O.D. (mm): 171.5-209.55. Use in Insert Bowl No.: API or No. 3.
(6). Model: Drill Collar Slips Type A. Drill Collar O.D. (in): 8 1/4-10.
Drill Collar O.D. (mm): 209.55-254. Use in Insert Bowl No.: No. 2.
(7). Model: Drill Collar Slips Type A. Drill Collar O.D. (in): 10-11 3/4.
Drill Collar O.D. (mm): 254-298.45. Use in Insert Bowl No.: No. 2.
2. Product Description:
Drill Collar Slips are specially developed to handle drill collars during well drilling.
Drill Collar Slips Type A are multi-segments slips. They can accommodate the changes of outer diameter after abrasion of drill collar. They are with light weight, large handling scale and reliable quality. This kind of slips are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment.
3. Features:
(1). Multi-segments design make it possible to handle different size drill collars by adjusting the quantity of inserts or slip body.
(2). 100% customer satisfaction for quality and reliability.
(3). After machining all slips undergo 100% inspection.
(4). Different types for clients choice for different depth well and different size drill pipe.
4. Material: Carbon Steel.
5. Processing Type: Forging.
6. Machine Type: Drilling Tool.
7. Use: Well Drilling.
8. FAQ:
Why you need to choose Lake Petro?
As a professional oil and gas service company, Lake Petro has many good experience in selling and serves for the oilfield industries for years. Quality is the culture of the company, we provide API and BV certified products for customer.
Can you make us the best quality products as well as a good price?
Yes, we can give you really high quality products with competitive price. We have a better understanding in Chinese market, with us your money will be safe.
What is special compare with other companies?
First, we provide the quality products, with BV and API certified; At the same time, we provide our customer with the best service after sale, any time any where.
1. Main Technical Parameters:
(1). Model: WT 4 1/2-6. Drill Collar O.D. (in): 4 1/2-6. Drill Collar O.D. (mm): 114.3-152.4.
Weight (kg): 49. Weight (lb): 108. Use in Insert Bowl No.: API or No. 3.
Max Load: 40 short tons.
(2). Model: WT 5 1/2-7. Drill Collar O.D. (in): 5 1/2-7. Drill Collar O.D. (mm): 139.7-177.8.
Weight (kg): 46. Weight (lb): 101. Use in Insert Bowl No.: API or No. 3.
Max Load: 40 short tons.
(3). Model: WT 6 3/4-8 1/4.
Drill Collar O.D. (in): 6 3/4-8 1/4. Drill Collar O.D. (mm): 171.4-209.6.
Weight (kg): 42. Weight (lb): 92.
Use in Insert Bowl No.: API or No. 3. Max Load: 40 short tons.
(4). Model: WT 8-9 1/2. Drill Collar O.D. (in): 8-9 1/2. Drill Collar O.D. (mm): 203.2-241.3.
Weight (kg): 39. Weight (lb): 86. Use in Insert Bowl No.: API or No. 3.
Max Load: 40 short tons.
2. Product Description:
Drill Collar Slips are specially developed to handle drill collars during well drilling.
Drill Collar Slips Type WT can accommodate drill collars from 4 1/2 in (114.3 mm) to 9 1/2 in (241.3 mm) O.D.. They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment.
3. Features:
(1). Multi-segments design make it possible to handle different size drill collars by adjusting the quantity of inserts or slip body.
(2). 100% customer satisfaction for quality and reliability.
(3). After machining all slips undergo 100% inspection.
(4). Different types for clients choice for different depth well and different size drill pipe.
4. Material: Carbon Steel.
5. Processing Type: Forging.
6. Machine Type: Drilling Equipment.
7. Use: Well Drilling.
8. FAQ:
Why you need to choose Lake Petro?
As a professional oil and gas service company, Lake Petro has many good experience in selling and serves for the oilfield industries for years. Quality is the culture of the company, we provide API and BV certified products for customer.
Can you make us the best quality products as well as a good price?
Yes, we can give you really high quality products with competitive price. We have a better understanding in Chinese market, with us your money will be safe.
What is special compare with other companies?
First, we provide the quality products, with BV and API certified; At the same time, we provide our customer with the best service after sale, any time any where.
Oil and gas field, mission centrifugal pumps, api 6a valves, spools, flanges, elevators, slips, manual tongs, power tongs , drilling equipment.Manaufacturing and supplying
China supplier high quality LAKE Square drive Roller Kelly bushing consists of lower body half, upper body half, roller, roller pin and etc. when the bushing is installed to square kelly or hex kelly, the square part of the lower body half can be fitted in the square of the master bushing. When operating, the rotary table drive master bushing and master bushing drive Roller Kelly bushing and Roller Kelly bushing drive square kelly or hex Kelly to rotate, such is the torque transporting. The lower body half is conically shaped to readily enter the bore of the master bushing and automatically center bushing and drill string within the bore of the master bushing. Inside rollers are journal bearings which are fitted to the roller pin, when kelly rotates and moves downward, the rollers rotates with Kelly, such change sliding friction to rolling friction and minimize the abrasion of the kelly. The bushing is equipped with mud-scrapper assembly to clean the mud.
The Square Drive Roller Kelly Bushing provides the following advantages:
1.Pulling out or feeding off string can be done while rotating;
2.Because of its integral construction, it can not fly out and hurts you.
3.The bushing is easily installed into the master bushing, maintaining good alignment;
4.The contact between Kelly and roller is rolling contact, so friction is lower, and weight on bit is accurate;
Safety clamps are tools for handling flush joint pipe and drill collar.
There are two kinds of model of safety clamps: wa-c safety clamps can accommodate pipe from 3 1/2~15 5/8 in (88.9-396.9mm)
O.D.. Model wa-t safety clamps can accommodate pipe from 1 1/8~4 1/2 in (28.6-114.3mm) o.D.
drill hose : it is composed of an inner rubber layer protection layer, middle rubber layer, steel wire spiral layer and external rubber cover
Use: The steel wire spiral drilling rubber hose are used in oil field well cementing. well pulling , petroleum geology exploration, small drilling machine, water conveyance, coal excavation. Used to carry slurry, normal temperature water, and other fluids.
1. Main Technical Parameters:
(1). Use for product: W-SDS Rotary Slips. Pipe size (in): 2 3/8"~4 1/2".
(2). Use for product: W-SDML Rotary Slips. Pipe size (in): 2 3/8"~5 1/2".
(3). Use for product: W-SDXL Rotary Slips. Pipe size (in): 3 1/2"~5 1/2".
(4). Use for product: 3 1/2~5 Rotary Slips. Pipe size (in): 3 1/2"~5".
(5). Use for product: 5~7 Rotary Slips. Pipe size (in): 5"~7".
(6). Use for product: W3 1/2"-75 (125) Rotary Slips. Pipe size (in): 2 3/8", 2 7/8", 3 1/2".
(7). Use for product: 5-75 (125 200) Rotary Slips. Pipe size (in): 4", 4 1/2", 5".
(8). Use for product: DCS-S Drill Collar Slips. Pipe size (in): 3"~4 7/8".
(9). Use for product: DCS-R Drill Collar Slips. Pipe size (in): 4 1/2"~7".
(10). Use for product: DCS-L Drill Collar Slips. Pipe size (in): 6 3/4"~14".
(11). Use for product: WT Drill Collar Slips. Pipe size (in): 4 1/2"~11 3/4".
(12). Use for product: 8" Drill Collar Slips. Pipe size (in): 8".
(13). Use for product: 9" Drill Collar Slips. Pipe size (in): 9".
(14). Use for product: Casing Slips. Pipe size (in): 6 5/8"~30".
(15). Use for product: WA-C Safety Clamps. Pipe size (in): 3 1/2"~15 5/8".
(16). Use for product: WA-T Safety Clamps. Pipe size (in): 1 1/8"~4 1/2".
(17). Use for product: QQ P60-89/585 Pneumatic Spider. Pipe size (in): 2 3/8"~3 1/2".
(18). Use for product: QQ P60-89/675 Pneumatic Spider. Pipe size (in): 2 3/8"~3 1/2".
(19). Use for product: QQ P60-127/900 Pneumatic Spider. Pipe size (in): 2 3/8"~5".
(20). Use for product: Well Repair Manual Tongs. Pipe size (in): 2 3/8"~10 3/4".
(21). Use for product: B Manual Tongs. Pipe size (in): 2 3/8"~12 3/4".
(22). Use for product: DB Manual Tongs. Pipe size (in): 3 1/2"~17".
(23). Use for product: 13 3/8 Casing Manual Tongs. Pipe size (in): 13 3/8".
(24). Use for product: Q13 3/8-30 Casing Manual Tongs. Pipe size (in): 13 3/8"~30".
(25). Use for product: Tubing and Workover Tongs. Pipe size (in): All size available.
(26). Use for product: Drill Power Tongs. Pipe size (in): All size available.
2. Features:
(1). The dies made from high-quality alloy steel in our company.
(2). The dies are chemically heat-treated for surface hardness.
(3). The dies and slip inserts are wear-raciting, corrosion-resistance.
(4). Customized products are available.
(5). Qualified API certified manufacture.
544 Api 7K Db Manual Tongs Suppliers
Short on time? Let Api 7K Db Manual Tongs sellers contact you.
