Please click here to check who's online and chat with them.

Find Verified 5# Metal Open End Zipper Suppliers, Manufacturers and Wholesalers

GOLD Member
Jul-11-22
 
1,Name: Sodium nitrite
Molecular formula: NaNO2
Formula weght:69.00
2Property: (1) ordinary sodium nitrite: white little crystals or light yellow
 (2) dry powder sodium nitrate: white crystal,non-caking, showing loose status.
Density:2.168. No odor, slightly salty. It is liable to deliquesce, dissolved in water,soluble in liquid ammonia,slightly soluble in ethanol and glycerin,Melting Point:271. Decomposition temperature is 320. It has oxidability and also has reducibility. It will slowly be oxidized into sodium nitrate in atmosphere, it can form nitrogen compound with nitrilo at low temperatures.
3Usage:It has been widely used in making nitro-compound and azo dye, mordant of textile dyeing, bleaching agent, metal heat finishing agent, cement early strength agent, and deicing agent etc.
Note: The product should be stored in a cool, dry place to prevent it from moisture, heat and sunlight. This product can not be mixed with strong reductant, inflammable and explosive materials, food, feed and additives. â?¢ This product is toxic and should be properly kept and can not be eaten.
4 Specification: (Technical Standards:GB2367-2006)
Item Unit Molten salt G High G First G Qualified G Dry powder G
Assay % 99.3 99.0 98.5 98.0 98.5
Sodium nitrate % 0.6 0.80 1.00 1.90 0.80
Chlorides % 0.03 0.10 0.17 -- 0.1
Water insolubles % 0.02 0.05 0.06 0.10 0.06
Moisture % 1.0 1.4 2.0 2.5 0.2
Loose degree -- -- -- -- 95
5,Package: net 50kg net each in plasic woven inner plasic bag, or according to customers requirement.
GOLD Member
May-02-22
 
Product Name: Ferrous Sulphate Heptahydrate
Molecular Formula: FeSO4. 7H2O
CAS No.: 7782-63-0
Mol Weight: 278.05

Usage and Dosage:
1. Industrially: ferrous sulphate heptahydrate is mainly used as a precursor to other iron compounds. It is a reducing agent, for the reduction of chromate in cement.
2. Nutritional Supplement: Together with other iron compounds, ferrous sulphate is used to fortify foods and treat iron-deficiency anemia. Constipation is a frequent and uncomfortable side effect associated with the administration of oral supplements. Stool softeners often are prescribed to prevent constipation.
3. Colorant: Ferrous sulphate can also be used to stain concete and some limestones and sandstones a yellowish rust color.
4. Water Treatment: Ferrous sulphate has been applied for the purification of water by flocculation and for phosphate removal in municipal and industrial sewage treatment plants to prevent eutrophication of surface water bodies.

Storage:
Storage Store in cool, dry, well ventilated area, removed from oxidising agents (eg. hypochlorites), acids, metals and foodstuffs. Ensure containers are adequately labelled, protected from physical damage and sealed when not in use. Large storage areas should have appropriate ventilation systems.

Precaution: Flammability Non flammable. No fire or explosion hazard exists.

Packing: Net weight 25kgs, 50kgs per each plastic woven bag

Technical Specification
Appearance: Light green crystalline powder


Fe 19.7%min
Pb 20 ppm max
As2 ppm max
Cd 5 ppm max
Size Crystalline Powder
GOLD Member
Feb-02-18
 
Commodity: Sodium Hydrosulfite
Other name: Synonyms: Sodium Hydrosulphite; Sodium Dithionite; Dithionous acid, Disodium salt; Sodium Sulfoxylate
CAS No.: 7775-14-6
Molecular Weight: 174.10
Chemical Formula: Na2S2O4

Product Description
Appearance: White, crystalline powder.

Product Feature
Odor: Slight irritative.
Specific Gravity: Unavailable
Solubility: Soluble in water.
Density: 2.19
pH: 6-7
pH Test-Method: PH test paper.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: Not applicable.
Melting Point: >300 C Decomposes.
Vapor Pressure (mm Hg): No information found.
Bulk Density: ~0.9
Evaporation Rate (BuAc=1): No information found.

Application
1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching .
2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps.
3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products,
4. in mineral, the compound of thiourea and other sulphides.
5. as reducing agent in chemical industry.
6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms.

Packaging 50kg/100kg net in iron drums with double PVC bags

Product Specification/Models
NDEX 90%, 88%, 85%. FOOD ADDITIVE
Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal
calculated as Pb, 1ppm
Water Insolubles05%
Shelf Life(month)12
May-06-23
 
5# metal long chain zipper
1: colour: any colours Excluding fluorescent colors
2: teeth shape: Ordinary teeth
3: 100y/roll, 600y/bag
4: weight: 4.6-4.8kg/100y
remark: we can customize 3-10 metal zipper long chain and finished zippers for you
Feb-05-24
 
5# aluminum open-end zipper
1: size: 50cm + auto lock
2: 100pcs/pe ( various color )
3: Any size can be customized for customers.
21753 5# Metal Open End Zipper Suppliers
Short on time? Let 5# Metal Open End Zipper sellers contact you.
GOLD Member
Apr-28-21

Polyester Cotton Open End Yarn

$1 - $1.50
MOQ: Not Specified
Supplier From Jinhua, Zhejiang, China
 
Product Description -
We supply different varieties of recycled OE cotton yarn for knitting or weaving color : same as picture
yarn counts : NE6 to NE20
strength : 350-1000
twist per unit:300-700

Key Specifications/Special Features - Polyester Cotton Open End yarn
Place of Origin China
Payment Term TT
Delivery Time Shipment within 10 working days

Minimum Order Size and Packaging details -
Packing 3.2 Kg one roll, 28Kg one Bale ,
Minimum Order Quantity 40HQ container(930 Bales)
GOLD Member
VERIFIED
Dec-02-21
Supplier From Dombivli East, Maharashtra, India
 
1. Berry copper wire scrap conforming to ISRI standards/specs.

2. Minimum order quantity: 200 Metric tons. The seller can offer 1000MT - 2000MT per month / per shipment on a long term basis ( for quantities greater than the above mentioned, please write to us in detail )

3. Origin of scrap wire ( either S.A / Europe / Russia ) seller's option.

4. SOP: Letter of Intent with Bank Confirmation letter from the Buyer (trading companies). If the buyer-importer is end-user/consumer, BCL is not required but due to manufacturing licence/end products' details and other information as required before the execution of a contract.

5. Price $5500pmt CFR one safe port

6. Delivery/shipment - shall be provided after the receipt of LoI with BCL and due diligence.

7. Payment terms by Irrevocable, confirmed Letter of credit from first-class/internationally recognized bank
GOLD Member
Feb-07-25

Recycled Open End Dyed Yarn

$2
MOQ: 500  Kilograms
Sample Available
Supplier From Ludhiana, Punjab, India
 
Recycled Open End Dyed Yarn For Knitting ON Cones. Composition: Cotton 60% / POLYESTER 40% .
COUNT RANGE: NE 6 TO NE 30. Single Ply / TFO and upto Multi Ply
GOLD Member
Jan-22-25

Open End Dyed Yarn For Knitting

$2
MOQ: 500  Kilograms
Sample Available
Supplier From Ludhiana, Punjab, India
 
Open End Dyed Yarn For Knitting On Cones. We Can Supply From Count Ne 6 To Ne 30. We Can Supply Single / Tfo And Upto 20 Ply In Different Colours.
SILVER Member
May-09-21

Ansell Mtmt

$17.50
MOQ: Not Specified
 
The commission for this price next week may not be available again: $17.50, including 0.50 commission, the higher opening is for the buyer, Make Up is buyer: This stage Please prepare
-LOI
Payment: SBLC 2 months
FOB Malaysia $17.5,
0.5 dollar commission start from your steam.
MOQ 5 M x 12 months
Maximum 30 M x 12 months
-POF
-NCNDA

STANDARD OPERATING PROCEDURE (SOP)
1.SUBMISSION
1.1 NCNDA (From End Buyer to Seller Mandate)
1.2 LOI
1.3 BCL
1.4 ATV-Funds Verification
1.5 LOA-Buyer Mandate (It is reqiured, if LOI is not issued by End Buyer)
2. FCO
3. ICPO
4. SPA + NCNDA (Seller)
5. PI
6. DRAFT LC/SBLC
7. ALLOCATION LETTER CONFIRMATION (Show via zoom meeting)
8. OFFICIAL LC/SBLC (Irrevocable, Transferable, Divisible and Revolving)
9. IMFPA
10. SGS Inspection (Cost will be charged with Buyer)
11. SGS, Certificate of origin will be supplied together with relevant documentation as SPA
12. LC Release & Goods Deliver
"We will proceed further if you can accept our SOP only"
SILVER Member
May-09-21

Ansell Micro

$17.50
MOQ: Not Specified
 
The commission for this price next week may not be available again: $17.50, including 0.50 commission, the higher opening is for the buyer, Make Up is buyer: This stage Please prepare
-LOI
Payment: SBLC 2 months
FOB Malaysia $17.5,
0.5 dollar commission start from your steam.
MOQ 5 M x 12 months
Maximum 30 M x 12 months
-POF
-NCNDA

STANDARD OPERATING PROCEDURE (SOP)
1.SUBMISSION
1.1 NCNDA (From End Buyer to Seller Mandate)
1.2 LOI
1.3 BCL
1.4 ATV-Funds Verification
1.5 LOA-Buyer Mandate (It is reqiured, if LOI is not issued by End Buyer)
2. FCO
3. ICPO
4. SPA + NCNDA (Seller)
5. PI
6. DRAFT LC/SBLC
7. ALLOCATION LETTER CONFIRMATION (Show via zoom meeting)
8. OFFICIAL LC/SBLC (Irrevocable, Transferable, Divisible and Revolving)
9. IMFPA
10. SGS Inspection (Cost will be charged with Buyer)
11. SGS, Certificate of origin will be supplied together with relevant documentation as SPA
12. LC Release & Goods Deliver
"We will proceed further if you can accept our SOP only"
GOLD Member
VERIFIED
May-28-21

Copra

$950 - $1.20K
MOQ: Not Specified
Sample Available
Supplier From Central Jakarta, Central Jakarta, Indonesia
 
Copra

We make high-quality copra by drying fresh coconut meat (kernel) in hybrid solar dryers. With efficient and continuous drying technology, we can reduce the moisture content of fresh coconut kernels from around 50% to lower than 6% within 48 hours. This result can be achieved by utilizing solar energy during daylight and renewable energy from smokeless biomass burning all night long.
Moisture content: maximum 6%, Free Fatty Acid content: maximum 0.5%, Green: 0%, Burnt: maximum 2%, Smoky: maximum 5%, Rubbery: maximum 5%

We only pick mature coconut fruits for the drying process, coconut must be put in a dryer immediately after opening to prevent microbes such as fungus, mold, and bacteria to grow. We keep the temperature in the oven dryer between 60 to 70 degrees Celsius. We inspect the copra periodically during the drying process, any damaged copra should be removed from the oven dryer immediately.
Jun-03-16
 
Product type: zippers
Material: nylon
Zipper type: close-end
Feature: auto lock
Use: bags, garment
Size: 5#
Place of origin: zhejiang, china (mainland)
Brand name: xindew
Model number: xdnz-009
Plastic type: nylon
Length: 8-30cm
GOLD Member
Feb-27-25
Supplier From Sheridan, Wyoming, United States
 
CHEMICAL COMPOSITION ELEMENTS CaO% MgO% SiO2% Al2O3% TFe% MnO% Cr2O3% P2O5% S%
MIN 24.00 3.50 10.00 2.00 11.00 0.02 0.00 0.02 0.05
MAX 49.00 25.00 28.00 12.00 36.00 2.50 0.80 0.42 0.20
TYPICAL 39.20 12.20 16.80 4.60 21.70 1.25 0.12 0.28 0.12

PHYSICAL APPEARANCE ASPECT
Agglomerate materials COLOR Gray blackish color

CHEMICAL BEHAVIOR
The basicity of the slag is normally fixed by the amount of lime and calcinated dolomite added, the silicon and aluminum levels of the hot metal and steel scrap charged as well as ferro-alloys.

Below present our general procedures for the purchase and sale of sugar of Brazilian origin:
1- Buyer issues a Letter of Intention (LOI) addressed to Seller;
2- Seller issues a Soft Corporate Offer (SCO);
3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller;
4- Seller issues Full Corporate Offer (FCO);
5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller;
6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented;
7- SPA is signed by Seller and Buyer;
8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller�´s Bank;
9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC);
10- Seller issues Performance Bond (PB) 2%;
11- Seller prepares the product and export documents;
12- Buyer receives the export documents by mail;
13- Buyer makes payment 100% to Seller�´s Bank through transfer bank (Swift Message MT-103);
14- Shipping;
15- Seller sends the original export documents to Buyer;

NOTES:
The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking.
Jun-10-23
 
1: We can offer various metal zippers,
2: long chain zipper
3: Y-Teeth and Ordinary teeth,any color
4: Any length can be customized.
SILVER Member
Apr-13-21

Nitrile Gloves

$15
MOQ: Not Specified
 
*Terms*
Moq 20M for 6-12month
Can Making Up

SOP

1. NCNDA
2. LOI/ICPO From Buyer to initiate order.
3. FCO/SPA from Seller
4. Factory Verification on Allocation Holder by Buyer

5. Opening of L/C with any of the below options :-

- Draft LC or BCL

- one to two month rolling L/C.

- 100% L/C.

- 1- 2 months DLC

While issuing FCO the allocation holder will make it clear any one of the payment options from above.
6: Within 5 to 7 working days after verification of LCAllocation letter for complete order from manufacturer, along with required documents,
Schedule of the deliver is provided with quantity
SILVER Member
May-06-21

Ansell Gloves

$15.30
MOQ: Not Specified
 
Ansell Edge $ 15.30process (inclusive0.30 for buyer party

SOP For Ansell edge
Price $15.30 - 0.30
buyer team 70%
our team 30%

-Buyer to provide Loi, NCNDA, ICPO if intermediate company involved, POF if required
Within 1day
-Seller will provide FCO

-Buyer to give FCO Counter sign and provide ICPO

Within a day

*After signing SPA-Seller can show authorisation letter* (As requested to seller) in Zoom meeting
Spa signed by both party
Seller to provide PI
Same day of PI Shared

-*LC TRANSFERABLE, IRREVOCABLE, DIVISIBLE and REVOLVING at site*

Within 3 days
-LC needs to be open within 3 days

Within 5 to 7 working days after verification of LC
Allocation letter for complete order from manufacturer, along with required documents,
Schedule of the deliver is provided with quantity

-Material SGS to be intimated prior to buyer

-At buyer cost SGS for material done at the FOB Port Klang

-After SGS
LC cleared on the invoice value immediately

If seller or buyer FAILS to proceed the deal after signing SPA and opening of LC 2% penalty will be applied.
SILVER Member
May-06-21

Ansell Gloves

$15.30
MOQ: Not Specified
 
Ansell Edge $ 15.30process (inclusive0.30 for buyer party

SOP For Ansell edge
Price $15.30 inclusive $0.3 Commission

-Buyer to provide Loi, NCNDA, ICPO if intermediate company involved, POF if required
Within 1day
-Seller will provide FCO

-Buyer to give FCO Counter sign and provide ICPO

Within a day

*After signing SPA-Seller can show authorisation letter* (As requested to seller) in Zoom meeting
Spa signed by both party
Seller to provide PI
Same day of PI Shared

-*LC TRANSFERABLE, IRREVOCABLE, DIVISIBLE and REVOLVING at site*

Within 3 days
-LC needs to be open within 3 days

Within 5 to 7 working days after verification of LC
Allocation letter for complete order from manufacturer, along with required documents,
Schedule of the deliver is provided with quantity

-Material SGS to be intimated prior to buyer

-At buyer cost SGS for material done at the FOB Port Klang

-After SGS
LC cleared on the invoice value immediately

If seller or buyer FAILS to proceed the deal after signing SPA and opening of LC 2% penalty will be applied.
SILVER Member
Mar-10-22

Test Kits

$1 - $3
MOQ: Not Specified
 
A box 2 doses I HEALTH price $6+10%
A Box 1 dose Flow Flex Price $4.4 +10%
You can be seller mandate

DDP USA AND ALL OVER WORLD

ATTENTION PAYMENT SBLC or BCL /PB

Moq 500K
MAX 5-10MX12Month
DDP USA or World BY AIR
Buyer side 50% Commission open
You can be seller part 10% of 50% for you

SOP:

1, Documents NCNDA ICPO KYC
2 Seller FCO
3 DRAFT SPAï¼?DRFT SBLC OR BCL /PB
4 SPA sign &IMFPA
5 ATTENTION PAYMENT
SBLC/BCL /PB / TT
6,Can get Allocation letter after confirm payment
7 DDP buyer Port Inspection pay TT
8 Then keep rolling for next deal


Notice

1, You can Mark up
2 you can be seller part
3 DDP to your warehouse

2022 Feb 26-Mar 10
SILVER Member
Mar-10-22

Ihealth Test Kits

$3
MOQ: Not Specified
 
A box 2 doses I HEALTH price $6+10%
A Box 1 dose Flow Flex Price $4.4 +10%
You can be seller mandate

DDP USA AND ALL OVER WORLD

ATTENTION PAYMENT SBLC or BCL /PB

Moq 500K
MAX 5-10MX12Month
DDP USA or World BY AIR
Buyer side 50% Commission open
You can be seller part 10% of 50% for you

SOP:

1, Documents NCNDA ICPO KYC
2 Seller FCO
3 DRAFT SPA DRFT SBLC OR BCL /PB
4 SPA sign &IMFPA
5 ATTENTION PAYMENT
SBLC/BCL /PB / TT
6,Can get Allocation letter after confirm payment
7 DDP buyer Port Inspection pay TT
8 Then keep rolling for next deal


Notice

1,You can Mark up
2 you can be seller part
3 DDP to your warehouse

2022 Feb 26-Mar 10
21753 5# Metal Open End Zipper Suppliers
Short on time? Let 5# Metal Open End Zipper sellers contact you.
Explore 5# Metal Open End Zipper related import export discussions