Buyer is interested to receive quotations for the following RFQ -
Product Name: Thermoforming of HDPE Sheet
Specifications :
Types: Vacuum Thermoforming, Pressure Thermoforming, Twin-sheet Thermoforming, Plug-assisted Thermoforming
Hpde Sheets Before Forming Have To Be 2100x2100x1,5 Mm
Purpose : Manufacturing
HS Code: 392010
Packaging Terms : Standard
Quantity Required : 1 Less than Container Load/LCL
Buyer is interested to receive quotations for the following RFQ -
Product Name: Personalized Plastic Bags
Specifications :
1. Material: PET/PE
Size: 160 × 350mm
Use: Mini Snacks
Quantity: At Least 20,000 Units
Designs: 5 Different Artworks In The Same Size
2. Material: Pe, 50 Microns
Size: 100 × 335mm
Use: 500 G Pastel
Quantity: 20,000 Units
3. Material: Pe, 50 Microns
Size: 130 × 335mm
Use: 1 Kg Pastel
Quantity: 20,000 Units
4. Material: Pe, 50 Microns
Size: 250 × 350mm
Quantity: To Be Confirmed
Please Provide Your Quotation, Minimum Order Quantities, Production Lead Time, Printing Options, And Delivery Terms
HS Code: 392321
Please quote for the following wholesale product requirement -
Product Name: Plastic Disposable Containers Like Bowls, Plates
Specifications:
Material: Plastic
Usage: Wholesaler
Type: Bowls, Plates, Spoons, Container With Lid Or Without Lid
Looking Suppliers From: India, China
Packaging Terms : Standard
Specifications:
Spe: EPS/GPPS/XPS scrap with or without flame retardant (briquettes, cast, crushed, resin, pellets
prevent the material from being contaminated with stones, metals, dust, paper, wood, cardboard...
Quantity Required : 1 Twenty-Foot Container a week minimum
Please provide a quotation to the following requirement from importer -
Product Name: Low Density Polyethylene (LDPE)
Specifications :
DPE MP3425 Complies With The Requirements As Below Indicated When The Product Is Processed Using The Correct Practice And Testing Procedures
Properties
Unit
Test Method
Typical Value
Density ( Compound ) At 23ºc
G/cm3
ASTM D 792
0.934
Melt Flow rate 2,16 kg al 190ºC
g/10min
ASTM D 1238
0.25
Melt Flow rate 5kg at 190ºC
g/10min
ASTM D 1238
1.0
Carbon Black Content
%
ASTM D 1603
Greater Than 2
Vicat Softening Point
ºC
ASTM D 1525
98
Melting point
ºC
ASTM D 2117
124
Brittleness Temperature
ºC
ASTM D 746
Less Than -70
Tensile strain at break
%
ASTM D 638
22
Tensile elongation
%
ASTM D 638
Greater Than 600
Hardness
Shore D
ASTM D 2240
50
E.S.C.R. 10% igepal F50
Hr
ASTM D 1693-A
Greater Than 5000
Oxidation Induction Time 210 ºC
Min
ISO 11357
Greater Than 20
Specifications:
Modified cellulosic polymer designer to provide cuttings encapsulation and filtration control.This polymer also provides improved shale control. It can be used in mud systems ranging from low-solids to weighted utilizing make up waters from fresh to salwater. Physical appearance: White powde; Specificgravity: 1.5 1.6; pH (1% solution): 7 11;Temperature stability: 149
Packaging Terms : in 25 kg sac
Specifications:
Modified cellulosic polymer designer to provide cuttings encapsulation and filtration control.This polymer also provides improved shale control. It can be used in mud systems ranging from low-solids to weighted utilizing makeup waters from fresh to saltwater.
Physical appearance: White powder
Specific gravity: 1.5 1.6; pH (1% solution) : 7 11
Temperature stability: 149
Packaging Terms : 25 kg bag
Quantity Required : 104 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : Dap Montardon, France., Other-Not Shown
