Please provide a quotation to the following requirement from importer -
Product Name: Refractories Material For Furnace Lining
Specifications :-
Powder with different Grain Sizes acc. to the Furnace Size and Melting Temperature
The main Elements of that Powder either a Quartz
( Fine Grade of Silica Oxide SiO2 )
or Alumina ( Aluminum Oxide Al2O3 )
depending on the Required Scrap to be Molten
27 MT Furnace Lining: SiO2: =97.5%; Al2O3: =0.8%; other requirements: Fe2O3 =0.2%; Magnetic material =0.02%; Moisture =0.5%; Density: =1.95g/cm3; Maximum operating temperature: 1650; Particle size: 0-20mm 10 MT Kneading Material (Stamp Mass): Al2O3 More Than 40%; Particle Size 0-10mm; Refractoriness More Than 1650 °C 10 MT Ramming Mix (Refractory Material, for Nodularizing Ladle Lining): SiC: 3-8%, SiO2 = 10%; Al2O3: 50-60%; Refractoriness not less than 1650 °C 20 MT Spheroidizing Ladle Castable : Al2O3=65%; SiO2=15%; Fe2O3=1.5%,;Bulk Density=2.5 Ton/M3; compressive strength=50Mpa; Good Wear Resistance; Coefficient of Friction=0.4; Refractoriness:1600 °C
Quantity - as mentioned above
Product name: Meltblwon 20 GMS White and NonWoven 20 /25 GMS B.Blue
Specifications :
1. Non Woven White 195*175*20 GSM - 19000 Kg
2. Melt Blown white 175*175*20 Gsm: 23000 Kg
3. Non Woven Blue 195*175*20 GSM - 23000 Kg
4. Ear Loop-12000 Kg
5. Nose Bridge 3000 Kg
The buyer is interested to receive quotations for the following RFQ -
Product Name: White Wood And Red Wood
Specifications:
(T)*(W)
16*(75-100)
19*(75-100-125-150-175-200-225)
22*(75-100-125-150-175-200-225)
25*(75-100-125-150-175-200-225)
32*(75-100-125-150-175-200-225)
38*(75-100-125-150-175-200-225)
44*(75-100-125-150-175-200-225)
47*(75-100-125-150-175-200-225-250)
50*(75-100-125-150-175-200-225-250)
63*(75-100-125-150-175-200-225-250)
75*(75-100-125-150-175-200-225-250)
(L) From 3 To 6 Meter.
We use all these dimensions according to our customers
Kindly inform us the sizes available
Specifications:
Type: Kettle, Coffee Pot, Coffee Machine, Fan Heater, Quartz Heater, Blender, Hand Blender, Hand Blender Set, Water Dispenser, Garment Steamer, Food Steamer, Etc.
Please quote for the following wholesale product requirement -
Product Name: Obstruction Lighting System
Specifications:
Medium Intensity Obstruction Light
type B, FAA L-864,110-240VAC, Red
flashing LEDS, MTBF 100khrs
2000 Cd, Dry contact, with IR module
FFA Compliant
Mounting bracket
Low intensity obstruction light type
B, FAA L-810,110-240VAC, Red
steady burn Double LEDS, with IR
LEDS MTBF 100khrs.
32 Cd, Dry contact, FFA Compliant
Control Pane1230VAC
ON/0FF switch
I cable gland output
Photocell
PVC control cable with numbered
cores, inner sheath and copper
screen. 0.6/1 kV 5 core. 2.5mm2
Low intensity obstruction light type
B, FAA L-810,110-240VAC, Red
steady burn LEDS, with IR LEDS
MTBF 100khrs
32 Crl. I)rv contact. FFA Cnmnlinnt
Qty: 30 pcs each type
Please quote for the following wholesale product requirement -
Product Name: Temperature Control Valve
Specifications:
For Iced Tank
No description unit quantity remarks
1 temperature Control Valve For A Process The Chemical Will Be Heated Inside Iso Tank Using Steam, Which Temperature Will Be 120 C, And We Only Need To Keep Temperature Chemical Between 50:55 °c. each 2 1- if You Have A Local Agency Or Distributor In Egypt, Please Give Key Person Contacts To Check With Him Also.
2- if You Need Any Additional Details About Process Information, Please Refer To Attached Drawing.
Qty: 2 Units
