Please quote for the following wholesale product requirement -
Product Name: Ductile Iron Pipes
Specifications:
- Pipe Ductile Casting, Min. Tensile Strength 420 MPa
- With high tensile strength, resistance to loads, pressure and vacuum, High corrosion resistance,
- Does not require cathodic protection
Packaging Terms : Carton & Bags
Specifications:
Nominal Pipe Size, NPS (mm) 1200
Line Pipe Material Ductile Iron
Pipeline Outside Diameter, O.D. (mm) 1255
Pipeline Inside Diameter, I.D. (mm) 1212
Nominal Wall Thickness (mm) 15.3
Pipeline Length, approx. (km) each 86
Medium Freshwater
Principal Design Code ISO 2531
Design Factor, F 1.5
Design Pressure (Barg) 16
Operating Pressure (Barg) 13
Design Temperature °C (Material) 50
Class Rating (Fittings and Flanges) ISO PN 16, PN 10
Internal Pipe Coating Cement mortar lining with seal coat
External Pipe Coating metallic zinc coating before applying
coal tar or a bituminous compound,
pigmented with aluminum of thickness
not less than 100 microns
Insulation Double layer of polyethylene + if
necessary tape Wrapping depending on
soil resistivity + C.P. system if the soil
resistivity is low
The buyer is interested to receive quotations for the following RFQ -
Product Name: Ductile Iron Pipes
Specifications:
Ductile iron pipes (BS EN 545:2010) Class C64, pipe wall thickness 6.1 mm
200 mm diameter pipes (500 meters)
200 mm diameter bend (42 no.)
200 mm diameter tee (14 no.)
200 mm diameter flanged joint (170 no.)
250 mm diameter pipes (9500 meters)
250 mm diameter bend (800 no.)
250 mm diameter tee (270 no.)
250 mm diameter flanged joint (3200 no)
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Hong Kong
Payment Terms : L/C
Looking for suppliers from : Europe, United States
The buyer is interested to receive quotations for the following RFQ -
Product Name: Ductile Pipes
Specifications:
1: Internal cement lining as per ISO4179, External zinc spray 200g/m2, and Black HCPE (70 microns) as per ISO8179
2: Ductile Pipe C40 Thickness
3: In Bundle
Please quote for the following wholesale product requirement -
Product Name: Iron Pipes
Specifications:
Type: casting
Material: Ductile Iron
Size: 600mm x 5.5 Meter; 400mm x 5.5 Meter; 300mm x 5.5 Meter; 250mm x 5.5 Meter; 150mm x 5.5 Meter
Specifications :
Materials: Pipe Ductile Casting, Min.tensile Strength 420 Mpa
With High Tensile Strength, Resistance To Loads, Pressure And Vacuum
High Corrosion Resistance
Does Not Require Cathodic Protection
Packaging Terms : Standard
Please quote for the following wholesale product requirement -
Product Name: Ductile Iron Pipe
Specifications :
Ductile Iron Pipe 8"/200mm Class C40 5,000 LM
2. Technical Specifications
2.1 General
DI pipes shall be centrifugally cast (C Class), with socket and spigot ends, EPDM rubber gaskets, according to EN545:2010
2.2 Pipe selection
DI Pipes According To EN 545-2010
The joints of ductile iron (DI) pipes and fittings shall be TYTON type
Outside protection coating:
Shall be of 400 g/m² metallic zinc Aluminum Alloy (85%+15%) plus epoxy finishing coat according to EN 545, applied also on socket inside, suitable for a ground conditions I and II and III.
Specifications:
Materials:
Pipe Ductile casting, Min. Tensile strength 420 MPa
With high tensile strength, resistance to loads, pressure and vacuum,
High corrosion resistance,
Does not require cathodic protection
Buyer is interested to receive quotations for the following RFQ -
Product Name: Ductile Iron Pipe
Specifications:
Materials: Pipe Ductile casting, Min. Tensile strength 420 MPa
With high tensile strength, resistance to loads, pressure and vacuum,
High corrosion resistance,
Does not require cathodic protection,
