Please provide a quotation to the following requirement from importer -
Product : Aluminium Rods
Specifications:
Application Standards & Regulations
Compliance to the latest issue of the following standards in addition to the characteristics specified in
clause 3 of this specification are required.
ASTM 8 233 & ASTM 8 193.
Chemical Composition:
Silicon (Si) Max. 0.10 %
Iron (Fe) Max. 0.40%
Cooper (Cu) Max. 0.05 %
Manganese (Mn) Max. 0.01 %
Chromium (Cr) Max. 0.01 %
Zinc (Zn) Max. 0.05 %
Boron (B) Max. 0.05 %
Gallium (Ga) Max. 0.03 %
Vanadium plus Titanium, total, Max. 0.02 %
Other elements each, Max. 0.03 %
Other elements total, Max. 0.10 %
Aluminium Not less than 99.50 %
Please provide a quotation to the following requirement from importer -
Product : Aluminium Rods
Specifications:
Application Standards & Regulations
Compliance to the latest issue of the following standards in addition to the characteristics specified in
clause 3 of this specification are required.
ASTM 8 233 & ASTM 8 193.
Chemical Composition:
Silicon (Si) Max. 0.10 %
Iron (Fe) Max. 0.40%
Cooper (Cu) Max. 0.05 %
Manganese (Mn) Max. 0.01 %
Chromium (Cr) Max. 0.01 %
Zinc (Zn) Max. 0.05 %
Boron (B) Max. 0.05 %
Gallium (Ga) Max. 0.03 %
Vanadium plus Titanium, total, Max. 0.02 %
Other elements each, Max. 0.03 %
Other elements total, Max. 0.10 %
Aluminium Not less than 99.50 %
Product : Aluminium Rods From Wanted ( Solid Tube )
Specifications:
Aluminium Rods From Wanted (solid Tube) With An Overall Diameter 7 Inche Or 8 Inche . Minimum Length 7 Meters And Maximum 8 Meters . ( Preferable Dimension 8 Meters )
Quality : the product type is 60-60 and 60-63
The chemicals analysis should be close to the spesification list below:
Alloy 60-60 :
Si : 0.3 - 0.6
Fe : 0.1 - 0.3
Cu : 0.1
Mn : 0.1
Mg : 0.35 - 0.6
Cr : -
Zn : 0.1
Ti : 0.15
Other : -
Alloy 60-63 :
Si : 0.2 - 0.6
Fe : 0.35
Cu : 0.1
Mn : 0.1
Mg : 0.45 - 0.9
Cr : -
Zn : 0.1
Ti : 0.1
Other : 0.1
Qty : up to 100.000 MT X 12 months + additional 24 months
Please quote for the following wholesale product requirement -
Product Name: Aluminum Rods
Specifications :
8mm Solid Aluminum Rod, Cut To 18" Lengths And Bored On The Ends With A 4mm Diameter Hole To A Depth Of 12.8mm.
175 Of The Rods Will Be Straight With A Bored Hole On Each End And A 1" Spring Pin Inserted Into One End. The Other 125 Rods Will Have The Hole Bored At One End With The Pin Inserted, The Other End Will Need A 110 Degree Bend At Approximately 2.5" From The End. I Have Attached A Pdf To Make It Clear I Am Ok With A Different Grade Of Aluminum. They Will Need To Be Anodized Medium Or Light Green
Packaging Terms : Custom Bundles
Specifications:
specs as follows: Grades: 6201/1350-H14/1350-H12 specified diameter: 7.6 to 9.52mm (Grade 6201) 9mm to 9.5mm (Grades H14 and H12) I shall send you the full specs sheet after contacting me
