Please provide a quotation to the following requirement from importer -
Product Name: Gas Compressor For A Gas Filling Station
Specifications:
gas compressor for a gas filling station.
Compressor unit SO-243 for gas filling station (OR ANALOGUE/ALTERNATIVE)
SECTION 2. SCOPE
The gas compressor must be used to drain liquefied petroleum gas from tank trucks / tank car into the tank and
pump gas from the tank to gas filling columns located in gas filling points.
SECTION 3 - OPERATING CONDITIONS
Subsection 3.1 General operating conditions
During operation, apply:
- Gas compressor in accordance with current regulations; Ambient temperature: - minus 10, + plus 55°
Subsection 3.2 Additional/special operating requirements
The operating mode of the gas compressor is continuous.
Service maintenance.
Warranty period: 12 months from the date of putting the equipment into operation.
Warranty obligations must cover all units and components of the supplied goods and, at the request of the
Customer, the replacement of the goods or the elimination of defects in the goods must be made within the time
agreed with the Customer and in accordance with the highest quality and safety standards.
SECTION 4. TECHNICAL REQUIREMENTS
Subsection 4.1 General technical requirements
Working environment - liquefied hydrocarbon gas in accordance with GOST 20448-90;
The device must be durable, sealed:
The body of the device should be manufactured in accordance with the current regulatory documents.
The following documentation must be attached to the
product • Operation manual in Russian or Uzbek;
• Certificate of conformity;
The technical characteristics of the supplied Compressor must be equal or superior in quality to the above
parameters.
And also the compressor must include, pressure gauges, a steel base (frame), a liquid separator according to
the standard. Provide flange accession of pipes . The requirements for the compressor must comply with the
requirements of the "Safety Rules in the Gas Industry of the Republic of Uzbekistan", approved by order of the
State Committee for Industrial Safety of the Republic of Uzbekistan "GOSKOMPROMBEZ" dated January 22,
2014. No. 13 (hereinafter - the Rules).
Subsection 4.2 Main technical, economic and operational indicators
The estimated service life is at least 10 years.
SECTION 13. REQUIREMENTS FOR THE QUANTITY, COMPOSITION, PLACE AND DATE
(FREQUENCY) OF DELIVERY
A gas compressor for LPG is subject to delivery, the total quantity is 1 set.
The completeness of the compressor is indicated in the technical documentation of the manufacturer (all
technical documentation is included in the delivery set).
Compressor SO-243-1 (SO-7V) is used when there is a need for compressed air in pneumatic systems ,
pneumatic equipment or pneumatic tools , during painting , painting, finishing works, in construction, in
production, mechanical engineering, industry and at home. It is perfect for working with paint sprayers,
spray guns and various pneumatic tools ( wrenches , balancers , pneumatic screwdrivers, pneumatic drills
, pneumatic saws , pneumatic machines, vibro- tampers , jackhammers, etc.) Compressor unit SO-243-1
(SO-7V) has a reliable and simple design. Ability to work both indoors and outdoors. Equipped with
wheels, which allows you to freely move the unit around the territory of enterprises, industrial zones ,
construction sites, etc.
Specifications
productivity, m 3 / hour 32
working pressure, kgf / cm 2 6
receiver volume, l 50
electric motor:
power, kWt four
voltage, V 380
N, rpm 2880
overall dimensions, mm
length (without handrail) 850X550X1000
weight, kg 132
Quantity Required : 1 Unit/Units
Shipping Terms : CIF
Destination Port : Uzbekistan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Aleksandr Gafurov
