Please provide a quotation to the following requirement from importer -
Product Name: Hydraulic Tipper Kit
Specifications:
Request For Quotation
Variant B — Dc 12v Electric Power Unit System
Application LCV Tipper Body | Body length: 2,800–4,000 mm | 3-way tipping (rear / left / right) | Max load: 5,500 kg
Drive System DC 12V Electric Motor – No PTO required – works on any vehicle with 12V battery
Target Price = USD 310 FOB per complete kit
Certification CE Declaration + ISO 9001 MANDATORY – non-certified products will not be evaluated
TECHNICAL OVERVIEW:
• Motor: DC 12V, min 2.2 kW (recommended 2.5 kW), duty cycle S3-20% | Current draw at full load: ~200 A
• Pump: 2.5–2.7 cc/rev (nominal 2.60 cc/rev) | Flow at 2,800 RPM: ~7.3 L/min
• Tipping time: ~95 seconds for 11.5L cylinder at 200 bar (acceptable for LCV intermittent duty)
• Lifting verification: Last stage Ø ~60 mm at 200 bar = 0.785 × 60² × 200 / 10,000 = 56.5 kN = 5.76 tonnes > 5,500 kg
VARIANT A — PTO GEAR PUMP SYSTEM
LCV Tipper Body | Body length: 2,800–4,000 mm | 3-way tipping (rear / left /right) | Max load: 5,500 kg
PTO (Power Take-Off) from vehicle gearbox – DIN 5482 spline shaft
= USD 325 FOB per complete kit
CE Declaration + ISO 9001 MANDATORY – non-certified products will not be evaluated
PTO GEAR PUMP – VEHICLE GEARBOX DRIVEN
Gear pump – PTO driven (bidirectional) - complete set with manual coupling cable + handle - as in the image - for quotation use the gearbox code for Iveco Daily: 5803269191 / FT50.6M / 2840.6 -- Displacement: 14–18 cc/rev (nominal 16.4 cc/rev) | Max continuous pressure: = 280 bar | Rotation: bidirectional (CW and CCW) | Shaft: DIN 5482 spline (Ø 22×19, Z13) | Inlet port: G 1/2" BSP | Outlet port: G 1/2" BSP | Speed range: 450–2,200 RPM | Flow at 750 RPM: ~12 L/min ? tipping time ~55 sec for 11.5L cylinder | Ref: IPH BPS 16, code 20BPS01601X000, displacement 16.4 cc/rev, weight 5.8 kg | Dimensions: A=111 mm, B=151 mm | Mounting: 3 bolts Ø 11 mm
PTO drive coupling bushing (buc?a de cuplare) -- Couples vehicle PTO output shaft to gear pump DIN 5482 shaft | Material: hardened steel | Specify PTO shaft type compatibility in Notes (most common: SAE 6-spline, DIN 5462) | Ref: current EU supplier = 15 €
Quantity Required : 200 - 500 Set/Sets
Shipping Terms : FOB/ CIF
Destination Port : Romania
Payment Terms : LC/TT
Looking for suppliers from : Worldwide
Contact : Dorin Cira
