Please provide a quotation to the following requirement from importer -
Product Name: Sealing Machines Like Nitrogen Flushing Machines
Specifications:
Category: Sealing Machines
Quantity: 1 Set/Sets
Details: Dear our valued partners, We are currently looking for a qualified supplier for an On-site Nitrogen Generation System with Headspace Nitrogen Flushing/Purging before Capping for our existing filling line. Please find attached our RFP document for your review and kindly propose the most suitable solution based on our requirements. We would appreciate receiving your technical and commercial proposal, including delivery lead time, warranty, and payment terms. Should you require any additional information or clarification, please feel free to contact us. We look forward to receiving your proposal.
Please quote for the following wholesale product requirement -
Product Name: Induction Sealing Machine
Specifications:
On Plastic Bottles With Current Production Line Capacity Of 40 - 45 Bottles Per Minutes. In The Near Future, The Capacity Will Increase To 300 Bottles Per Minutes.
1 Complete Unit Of Machine
Product Name: Dynamic Wind Generator Like Large Axial Propeller
Specifications:
Product Name: Large Axial Propeller For Dynamic Wind Generator
Special Note: Share CO Form E Your Company Made You Can Delete Information About The Customer, CQ .. And Provide The Drawing/ Datasheet
Application: open-jet dynamic wind generator for facade/window/door testing.
Fan/propeller type: large axial-flow propeller/impeller.
Horizontal shaft installation.
Inlet: free/open air inlet.
Outlet: open discharge/free jet.
A safety protection mesh and water spray rack will be installed between the propeller and test specimen.
Required air velocity at the specified test plane: = 36 m/s.
Equivalent dynamic pressure at 36 m/s is approximately 794 Pa at ? = 1.225 kg/m³.
Static pressure
Propeller diameter range: 2,500–3,000 mm; supplier may recommend optimum diameter.
Variable-speed operation by VFD from low speed up to at least the 36 m/s test condition.
Continuous operation shall be possible at the 36 m/s design condition.
Proposed propeller diameter.
Hub diameter and hub-to-tip diameter ratio.
Number of blades.
Blade material and material grade.
Hub material.
Blade installation angle / pitch angle at design point.
State whether blade pitch is fixed or adjustable.
Dynamic balancing grade of propeller assembly.
Propeller assembly mass.
Rotational speed corresponding to 36 m/s at the test plane.
Maximum allowable rotational speed.
Shaft power at design point.
Recommended motor power.
Propeller/fan efficiency at design point and basis of determination.
Guaranteed vibration level.
Expected noise level and measurement condition.
Detailed drawing of the impeller.
Quantity Required : 1 Less than Container Load/LCL
Buyer is interested to receive quotations for the following RFQ -
Product Name: Plywood
Specifications :
Type: Natural Rattan Cane Webbing (vienna Cane / Cane Mesh) Mounted To The Front Side
Suitable For Furniture Applications Such As Drawer Fronts And Cabinet Doors
Clean And Consistent Finishing Suitable For European Furniture Customers
Estimated Volume
Quantity - 20,000–30,000 Units Every 6 Months
Expected To Be Divided Among 2–3 Different Panel Sizes
