Please provide a quotation to the following requirement from importer -
Product Name: Refractories Material For Furnace Lining
Specifications :-
Powder with different Grain Sizes acc. to the Furnace Size and Melting Temperature
The main Elements of that Powder either a Quartz
( Fine Grade of Silica Oxide SiO2 )
or Alumina ( Aluminum Oxide Al2O3 )
depending on the Required Scrap to be Molten
27 MT Furnace Lining: SiO2: =97.5%; Al2O3: =0.8%; other requirements: Fe2O3 =0.2%; Magnetic material =0.02%; Moisture =0.5%; Density: =1.95g/cm3; Maximum operating temperature: 1650; Particle size: 0-20mm 10 MT Kneading Material (Stamp Mass): Al2O3 More Than 40%; Particle Size 0-10mm; Refractoriness More Than 1650 °C 10 MT Ramming Mix (Refractory Material, for Nodularizing Ladle Lining): SiC: 3-8%, SiO2 = 10%; Al2O3: 50-60%; Refractoriness not less than 1650 °C 20 MT Spheroidizing Ladle Castable : Al2O3=65%; SiO2=15%; Fe2O3=1.5%,;Bulk Density=2.5 Ton/M3; compressive strength=50Mpa; Good Wear Resistance; Coefficient of Friction=0.4; Refractoriness:1600 °C
Quantity - as mentioned above
Specifications :
Ceramic parts against the disc
92% 95% 99% 99.7% Alumina Complex Shape Ceramic Parts
shape :Spin, square, Round
Use : Anti drilling protection
Buyer is interested to receive quotations for the following RFQ -
Product Name: Ceramic Tube One End Closed
Specifications :
50pcs each of these sizes
Ceramic C610 closed one end 15mm x 11mm x 1000mm
Ceramic C610 closed one end 15mm x 11mm x 500mm
Ceramic C799 closed one end 15mm x 11mm x 1000mm
Ceramic C799 closed one end 15mm x 11mm x 500mm
6mm OD x 4mm ID x 50mm long C610 open both ends (2000pcs)
