Please click here to check who's online and chat with them.

Find Verified X Ray Films Suppliers, Manufacturers and Wholesalers

Top Supplier Cities : -  
Aug-09-20
 Inquire Now  
Digital Radiography & Fluoroscopy X-Ray System
Feb-21-11
Supplier From Helsinki, Finland
 Inquire Now  
This laminating tunnel / convection oven is made by Swedish TRIAB / Tri Innovations AB in year 2006. The oven is designed for industrial use and in build up in two separable laminating sections, both equipped with one 40.5 kW hot air sections, one product and one return conveyors and common control unit. All product touching parts are made either of stainless steel (structures and panels) or Teflon made net belts. Convection belt (600 mm wide) is located inside of the oven tunnel and has grid type surface, the return conveyor is installed on the tunnel and it has tight waived Teflon belt. The control cabinet is attached to the equipment structures. The speed of laminating conveyor is adjusted with an inverter driven motor. The speed of return conveyor can be fine tuned via a potentiometer. The equipment is featured with a remote control possibility. This has been operating with hygienic products (material foam / polyurethane film, thickness 5 mm, max. width 450 mm and production speed 6 m/min) and is in excellent operational condition with total 3450 operating hours only and it comes with original operation manual in English language.

Technical data:
Made by: TRIAD / Air Innovations AB
Manufacturing year: 2006
Total operating hours: 3450
Convection capacity: 2 x 40.5 kW
Process control PLC: Eurotherm 2216e
Hot air circulation volume: 2 x 9000 m3/h
Fan electric power: 2 x 2.2 kW
Temperature range: 50 – 150 C
Total machine length: 10 000 mm
Total machine width: 1600 mm
Convection belt material: Teflon covered metal net
Convection belt length: 9 000 x 600 mm
Convection belt speed: 3 – 8 m/s / 0.25 kW, inverted controlled
Heated width: 650 mm
Inside / free height: 80 mm (from belt to nozzles)
Return conveyor: Habasit FAB-8EO WV
Return conveyor dimensions: 12000 x 600 mm (Teflon)
Return conveyor drive: 0.25 kW, 380 V/50 Hz.
40 X Ray Films Suppliers
Short on time? Let X Ray Films sellers contact you.
Feb-21-11
 Inquire Now  
Compressors units (totally 4 pcs) are built by York Sabroe in 2002 and 2003 and they operate with R22 refrigerant. Two identical SAB 128 HF screw compressor units are built on a common base frame with an integrated horizontally mounted oil separators, oil circulation pumps and local operating panels. Common (for two compressors) plate type Freon / Glycol evaporator, internal glycol circulating pump and one large Freon buffer tank is also build on the same base frame. Delivery includes also evaporative condenser and LV / Control cabinet and external glycol circulating pump.

Above described 2 x SAB 128 HF packages we have two for sale, one made in year 2002 and the other year 2003. Both packages are still installed and can be tested in mutually agreed time. Units have been in operation approx 6 years and 5 years and they are in very good condition.

Technical data
Number of compressors - 4 pcs
Compressor type - SAB 128 HF
Refrigerant - R 22
Cooling capacity - 4 x 379 kW ( 0 /+40C)
Swept volume - 4 x 454 m3/h
Electric drives (compressor) 4 x 110 kW - 400/690 V 50Hz (also suitable for 60Hz)
Freon buffer tank -2 x 1650 liters
Plate evaporators - Alfa-Laval M10-BW FGR
Evaporative condensers - 2 x BAC VXC 116 Closed Circuit
Condenser fans - 1 x 17 kW and 1 x 4 kW for each
Condenser circulating pumps- 2 x Grundfors LP80 - 25/133
Glycol pumps - 2 x Grundfors LP 80 - 25/133
2 x Hilge Mahana 65-160
Jan-09-24

Copper Concentrate

$2.00K - $3.00K
MOQ: 350  Metric Tonnes
Supplier From Helsinki, Finland
 Inquire Now  
We have from Zambia in bonded warehouses Copper concentrates
+40-46% Cu
+34-40% Cu
+25-34% Cu
From flotation.
Quantities min 350 mt, up to 1500 mt per month.
Pricing based on LME Cu x Cu% x payable % x dry basis. Ex-bonded warehouse.
Final inspection on buyer's order.

Do not hesitate to ask for more details.

Mikael Keinonen
GOLD PLUS Member
VERIFIED
Sep-19-26

Apple 20W Usb-C Power Adapter White, A

$5 - $6 / Piece (FOB)
MOQ: 100  Pieces
Sample Available
 Inquire Now  
Apple 20W USB-C Power Adapter for iPhone, iPad

Charge your new iPhone or iPad with no-worry about damaging it using the original Apple 20W USB-C wall adapter!

Use it for fast charging of your iPhone 12/13/14/15/16/17 series, from 0% to over 50% in just 30min. It is designed with a Type-C interface with a maximum output of 20W.

Features:
- Original Apple 20W USB-C power adapter
- A powerful and reliable charger for iPhone, iPad
- The Apple USB-C power adapter supports fast charging
- It comes without the charging cable - you need to use your own cable

Compatibility:
- iPhone 15 Pro Max, iPhone 15 Pro, iPhone 15 Plus,iPhone 15, iPhone 14 Pro Max, iPhone 14 Pro, iPhone 14 Plus, iPhone 14, iPhone 13 Pro Max, iPhone 13 Pro, iPhone 13, iPhone 13 mini, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12, iPhone 12 Mini, iPhone SE (2020), iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8, iPhone 8 Plus
- iPad Air (2020), iPad 10.2 (2020), iPad Pro 11 (2020), iPad Pro 12.9 (2020), iPad Mini (2019), iPad Pro 12.9 (2015), iPad Pro 12.9 (2017), iPad Pro 10.5 (2017), iPad Pro 12.9 (2018), iPad Pro 11

Related categories: Phone Accessories, Phone Accessories, Phone Chargers, iPhone Charger, iPhone USB-C Charger
Apr-18-19
 Inquire Now  
Name of product : Cobalt Concentrate 10-20% and Cobalt Hydroxide 24-26% and grade 8-10%.

Price of product : LME Cobalt x Co% x payable % on dry basis ex-warehouse Zambia. Exact payable % to be determined for quality required.

Product origin : Zambia

Key Specifications/Special Features

Harmonization System (HS) Code :

Minimum Order Size : 500 mt, but up to 2000 MT per month

Packaging details : Big bags
Nov-18-24

Titanium Ore 45% Tio2

MOQ: 500  
Sample Available
Supplier From Helsinki, Finland
 Inquire Now  
Prouct : we could supply Titanium Ore
Production : 100-150 mt/ week
Grade : 45% TiO2 with Al2O3 with good percentage with Fe
packing : 1mt big bags or 50 kg bags at selle'sr account
Size : < 1mm
Production in Zambia.

Please advise interest.

Metores Ltd.
Br. Mikael Keinonen
Feb-14-24

Tantalite

$142
MOQ: 47  Metric Tonnes
Sample Available
 Inquire Now  
Quantity now available in warehouse is 50.000 kgs +/- 10%
After this can be 50 mt per month or more.

Ultra High grade Tantalite with 55-57% Ta2O5.
- Full docs available for your DD.
- The CCIC earlier assay result. Videos I can send via Skype or WhatsApp.
- Location bonded warehouse in Zambia.
- weight list of packing (steel drums) https://www.agsmovers.com/frasers/
- Price : 142,00 USD/kg Ta2O5 ex-warehouse
- Payment 100% paid in warehouse after client final inspection.

Let us agree on the terms, thank you.
Jul-14-18

Aluminium Turnings

$1.15K
MOQ: 44  Meters
 Inquire Now  
Clean alloy 7075. Ready now 22 mt. And 80-100 mt per month
We also have 2024 alloy, 120 mt and 100 mt regularly.
full details upon interest.

Metores Recycling
Helsinki
Mikael Keinonen
Feb-21-11

Overhead Crane

MOQ: Not Specified
Supplier From Helsinki, Finland
 Inquire Now  
Industrial Crane Konecranes CTX 10 t, Dual Bridge with 33.6 m span

The crane was manufactured by Konecranes Oyj in 2001 and the operation was stopped in year 2006. The equipment was regularly serviced by the manufacturer and is thus in excellent operating condition. The crane is still installed in its original place and can be tested on any time. The double bridge is welded housing construction equipped with one double speed wire hoists and a motorized rail equipment on both ends. The crane has both the local wire connected control unit as well as the wireless remote controller. On the bridge there is a service platform and the local LV û and control cabinet. All electric motors are dimensioned in accordance with Industrial Heavy Duty ED classification. The equipment includes the crane moving rail which will be sold separately.

Technical data:
Manufacturer's type:CXTD10t x 33.6m Hol: 6.1m
Lifting capacity:10 000 kg
Span distance:33.55 m
Lifting class:FEM M5 (2m)
Bridge structure:Welded case
Total weight:Approx 22 000 kg
Type of wire hoist:XL 404N40BDA4
Lifting height:6.1 m
Lifting speeds:8.0 and 1.3 m / min
Wire hoist speeds:32 and 8 m / min
Bridge speed:Inverter controlled, max 40 m / min
Wire hoist lifting motor:Double power 15 and 2.5 kW (60% ED)
Wire hoist moving motors:2 x 0.65 kW (40% ED)
Bridge moving motors:2 x 1.8 kW (40% ED)
Total power need:19.9 kW / 400 V / 50 Hz
Crane moving rail:60 x 40 cm, length 2 x 140 m.
Feb-22-11

Wrap Around Packer Kisters 310

MOQ: Not Specified
Sample Available
Supplier From Helsinki, Finland
 Inquire Now  
Kisters Wrap Around Packer 310
Kisters fully automated wrap around packer model 310 is a single-lane, high-performance packing robot for producing wrap-around and tray packs from stable individual products. It can handle tins, cans, jars, glass and PET bottles, as well as pre-packed products from the beverage, hygiene and food processing industry with high packaging speeds.
It can process flat corrugated cardboard and full carton blanks in different qualities. In each case, the carton is folded tightly around the product groups and subsequently glued with hotmelt and it has a large and easily accessible cardboard blank magazine. Optimum packaging results are achieved in conjunction with the precise cardboard blank guides and the exact folding process.
Wrapping robot can handle a wide range of formats. The unit is PLC-controlled and it can be easily adjusted for other packing formats. This machine has been packing beer tins (12/24 x 0.3 liters and 12 / 24 x 0.5 liters) into cartoon wrap-around packs at speed of 60 packs / min. This unit was in full operation till beginning of November 2010 and is now dismantled and stored.
Technical Data
Manufacturer: Kisters Machinenbau GmbH (Nowadays KHS )
Model: Wrap Around Packer 310 / 100
Year of manufacture: 1994
Serial number: 941782
Capacity: upto 60 cycle / min
Electricity: 16 kVA, 400 V / 50 Hz
Feb-21-11
Supplier From Helsinki, Finland
 Inquire Now  
Compressor single stage, standard speed oil-injected rotary screw compressor with manufactured by German company Drucklufttechnik GmbH in year 2002. The complete unit consists of intermediate pressure vessel and Ultratroc - air dryer all delivered same time as the compressor. The unit is controlled by modern DELCOS 3000 control unit. The total unit has 30320 operating hours, the unit has been regularly serviced by a compressor service company and is in good operational condition. The compressor is single-stage, double screw, V-belt driven electric motor drive compressor which has oil cooler and thermostat controlled water - air after cooler on discharge of the pressurized air. The operations were stopped in year 2006 but the compressor and other equipment are still installed and ready for test run.

Technical data:
Compressor type:CompAir L90 7,5A
Capacity:16.1 m3/min, 7.5 bar
Comp. electric motor:90 kW - 400/415 V û 50 Hz
Air cooler electric motor:3.0 kW - 400/415 V û 50 Hz
Compressor weight:2380 kg
Compressor dimensions:2.4 x 1.4 x 2.0 m (W x L x H)
Air dryer type:Ultratroc SD 1350 û type 422
Air dryer air volume:22.5 m3/min
Total power requirement of dryer:2.4 kW
DryerÆs refrigerant:Type R134 a û filling 3.5 kg
DryerÆs dimensions:1200x900x800 mm, weight 185 kg
Int. mediate air pressure vessel:Volume 2 m3, 10 bar, made by Galvanoimis Oy.
Feb-21-11
 Inquire Now  
Good condition filtration press made ny German MSE Filterpress GmbH in year 1997. The press has 33 plates of size 630 x 630 mm, cace thickness 25 mm. Includes own hydraulic system and control cabinet.

The equipment is manufactured by German MSE Filterpress GmbH, year 1997. Manufacturer’s type KFP 630-40-25K-MPN+DLMP. Structure is made on normal construction steel, plate size is 630 x 630 mm. The filter plates are pressed with single acting hydraulic cylinder with inbuilt hydraulic pump-motor. Product is fed in a central sludge feed inlet with flange connection and each pressing unit has its own outlet for the liquid filtrate which is them collected in one outlet channel. The cake will be disposed under the press. The unit has its own control panel attached to the equipment.

Technical data:
Manufacturer: MSE Filtterpress GmbH
Year of manufacture: 1997
Manufacturers type: KFP 630-40-25K-MPN+DLMP
Plate size: 630 x 630 mm
Number of plates: 33
Cake thickness: 25 mm
Hydraulic pressure: 380 bar max
Filtration pressure: 15 bar.
Feb-21-11

Tool Storage

MOQ: Not Specified
Supplier From Helsinki, Finland
 Inquire Now  
Double floor tool storage made of removable metal structure. Walls on 3 sides of the storage, one side is main building wall. Includes two lockable separate storage rooms and selves. Free height in lower level is 2.7 meters. Material is steel and aluminum. Will be sold as is where is bases.
Feb-21-11

Wind Turbine

MOQ: Not Specified
Supplier From Helsinki, Finland
 Inquire Now  
Totally two identical 145 kW wind turbine units, made in 1988 by Danish A/S Nortank, total operating hours approx 75000. The equipment have been dismatled since 2008 and inspected and serviced for operation condition and they are ready for immediate delivery

We have totally 2 units of uninstalled complete wind turbines manufactured by Danish A/S Nordtank in year 1988, manufactures type NTK 130 with rated power of 2 x 145 kW. The mills are in good operational condition and ready for immediate shipment. The hubs are heat treated MEEHANITE hubs made by company SABROE and are equipped with cast iron construction which allows adjustment for blade pitch angle. The blades are made by Danish company LM- Glasfiber, material is glass fiber reinforced polyester and they have self-supporting structure with bushing roots. The blades have also hydraulically activated tip brakes which automatically rotate the tips to a 90 degree break angle when wind is lost or it can be used for maintenance stoppage. The gear box in made by German Lohman & Stolterfoht and it is two step planetary gear type with high AGMA rating of 302 kW. The break system is 100% fail safe Nortank’s own hydraulically / mechanically activated brakes. Both units have they own Motorola 6809 multi-microprocessor operated control units which are housed in dust proof steel cabinets.

More information on requests, for spam protection please introduce yourself properly.

Main data of one mill:
Manufacture’s type: NTK 130F/LM
Year of manufacture 1988
Total operating hours: approx. 75000
Rated capacity, max: 145 kW
Number of blades: 3 pcs
Rotor diameter: 22 m
Rotor speed: 44.5 rpm
Cut-in wind speed: 4.0 m/sec
Cut-out wind speed: 53 m/sec (120 mph)
Hub height: 26 m
Generator: ASEA 145 kW / 1500 rpm / 50 Hz
Blade type: LM 9.7 m H/H/T diam. 21 m
Gear box type: Lohman & Stolterfort GPC 145
Clutch type: Lohr & Brokamp Universal Joint No 105
Total weight: 15200 kg.
Mar-08-11
 Inquire Now  
This Powerpak 660 horizontal thermoforming machine (form/fill/seal) is manufactured by German Tiromat Krämer+Grebe GmbH & Co in 1998. It is designed for high capacity packing of various products in food and pharmaceutical industry. This unit has been packing bread in to vacuum pack and it is equipped with a three head hot foil printer, 2- gas mixing device for CO2 injection, separate vacuum pump, cross- and longitudinal cutters and water cooled upper cover of the forming unit. Construction material is food quality stainless steel and equipment is controlled with PC-programmable Tiromat Control Unit.

This unit has very little operation hours - estimated total 3000 hours - and therefore it is in excellent condition. Operating and service manuals in English, Finnish and German and machine comes with the CE-certificate.


Machine type:Powerpak 660
Machine number:665/0211
Manufacturing year:1998
Foil type:Flexible
Formatting width:430 mm
Film type used:PS-PE 450/50
Max formatting depth:40 mm
Forming dies:223-3,1
Capacity:10 phases / min
Control unit:Tiromat
Ho foil printer:SC-700 with 3 printing units
Overall length:7.30 meters
Overall width:1.15 meters
Height:1.85 meters
Nominal power need:50 A / 380 V / 50 Hz.
Feb-21-11
Supplier From Helsinki, Finland
 Inquire Now  
Rotary Lube Blower / Vacuum compressor KAESER EB 420 C û 38 m3/min, 53 kPa

There are two identical sets of oil-free, 2 lobe rotary blowers, made by Germand Kaeser Kompressoren GmbH in year 2005 with accessories. Manufactures type is Kaeser ED 420 Compact Omega Pluss 53 and accessories include a control cabinet with two inverters and programmable Kaeser Start Control STC 30 unit, totally 6 preliminary intake air filters and 3 final air intake filters with their steel supports. The rotary blower units have removable sound enclose for noise insulation. Operation of the equipment was stopped in year 2007, total running hours approx 7000 and therefore they are in excellent operational condition. In addition, we can offer you service maintenance by the manufacturer at separate cost.

This equipment is suitable for demanding dust collection and pneumatic transportation of various products due to oil free operation. For pneumatic transport application some changes in filters and other parts are needed.
The rotary lobe has two blower shafts with high efficiency Omega profile in a blower block. The rotary lobe and the block have a very small distance and they are not touching each other's and therefore there is no need for lubrication oil. The rotors are driven by high efficiency electric motor via belt connection and they both are installed on the same base frame. . The inlet and discharge silencers are designed to be effective at all frequencies and are eminently suited to variable speed . Higher rotational blower speeds produce high volumetric efficiencies, which in turn lower discharge temperatures and power consumption. The Compact Range ensures that all serviceable items are accessed from the front panels of enclosures.
The preliminary intake air filters are combination of cyclone and bag filter and it removes most of the dust from inlet air. Fine filter is a combination of cyclone and 138 ceramic fine filters which removes fine dust very effectively.

Technical Data
Manufacture's type: EB 420 Compact Omega plus 53
Manufactured in year: 2005
Suction capacity with max vacuum:38,0 m3/min
Power demand max: 40,3 kW
Rotor's rotation speed 4120 rpm
Max suction vacuum: 0,53 bar (abs.)
Discharge pressure: 1,0 bar (abs.)
Max pressure increase: 470 mbar
Temperature rise max -t: 82 K
Electric motor: 45 kW û 50 Hz / 400/690V û 83/48 A
Electric motor nominal speed:2965 rpm
Protection class: IP 55
Inverters: Mitsubishi FR-F740-01160-EC
Case ventilation fan: 370 W û 50 Hz / 230 / 400V
Weight blower with the case:1120 kg
Blower case main dimensions:1.8 x 1.7 x 1.8 m (K x L x S)
Noise level: 99 dB (A)
Noise level with the case: 84 dB (A).
40 X Ray Films Suppliers
Short on time? Let X Ray Films sellers contact you.
Explore X Ray Films related import export discussions

X Ray Films Sourcing Guide: Explore the Global Market For Reliable Suppliers And Exporters


X-ray film is a critical diagnostic consumable in healthcare systems across the world. Hospitals, diagnostic centers, clinics, and imaging labs rely on medical X-ray films for accurate imaging, record keeping, as well as patient diagnosis. Even after the rise of digital imaging, the demand for X-ray and ct scan films remains strong in several regions because of affordability, reliability, and ease of use.

For global buyers, it is very important to source from trusted X-ray films suppliers in order to ensure consistent image quality, proper sensitivity, and long shelf life. Moreover, partnering with experienced medical X-ray film manufacturer suppliers, and wholesalers helps buyers secure X-ray films at best price while maintaining international quality standards. But before you move on to learn ways to find the best X ray film suppliers, let's first understand the market dynamics and best business opportunities. 



What Are the Most Popular X Ray Films Varieties in Global Demand?

X-ray films come in different formats, sizes, and coatings to support various medical and industrial imaging needs. We usually categorize X-ray films based on their sensitivity (blue or green), number of emulsion layers (single or double-sided), use (screen or direct exposure), and application (general, dental, mammography, or industrial). Buyers usually select X ray consumables based on imaging equipment compatibility, exposure sensitivity, and processing method. From general radiography to specialized imaging, X ray dealers and manufacturers offer a range of options to meet global diagnostic needs. Here are the most popular varieties that remain in high demand worldwide. 

X-Ray Film TypeMain UseTypical FormatsKey Buyer Considerations
Medical Radiographic X-Ray FilmGeneral diagnostic imagingSheets & rollsHigh-volume product; regulatory approvals required
Dental X-Ray FilmIntraoral & panoramic dental imagingSmall sheets, rollsFast-moving; buyers focus on speed class (E/F)
Mammography X-Ray FilmBreast imagingSingle-emulsion sheetsStrict quality & certification requirements
Laser Imager X-Ray Film (Dry Film)Digital imaging systems (CR/DR)Sheets (blue/clear base)Strong export demand; no wet processing needed
Computed Radiography (CR) X-Ray FilmCR system image printingLaser sheetsBuyers expect stable density & long shelf life
Green Sensitive X-Ray FilmUsed with green rare-earth screensSheetsHigher speed; buyers check screen compatibility
Blue Sensitive X-Ray FilmUsed with calcium tungstate screensSheetsCost-effective; still widely used in developing markets
Screen X-Ray FilmGeneral radiography with screensSheetsSensitivity (blue/green) must match screens
Non-Screen X-Ray FilmHigh-detail imagingSheetsLower volume; niche diagnostic & lab use
Veterinary X-Ray FilmAnimal diagnosticsSheets & rollsPrice-sensitive; bulk buyers common
Industrial X-Ray Film (NDT)Welds, pipelines, aerospace testingSheets & rollsHigh margin; ASTM/EN compliance essential
Fluoroscopic X-Ray FilmMotion & contrast studiesSheetsDeclining but active in certain regions
Duplicating X-Ray FilmCopying existing radiographsSheetsInstitutional buyers; consistent density required

If you are a buyer sourcing X-ray films, you can also procure multiple related product categories from the same supply network. These include X-ray Parts & Instruments, Medical Films, Medical Software, and other Medical Equipment & Machinery, helping you streamline purchasing and logistics. Beyond medical products, you can also source complementary categories such as DVD & Blu-Ray Discs, DVD & Blu-Ray Players, Window Films & Screens, Industrial Tapes/Films, and Photo Film Roll, making it easier to consolidate orders across healthcare, imaging, and industrial applications.


What Are the Best Business Opportunities for X Ray Films Buyers?

X-ray films offer stable and recurring business opportunities for importers, distributors, and medical supply traders. You should know that diagnostic centers and hospitals regularly require replenishment, which creates consistent repeat demand. If you are a new buyer, you can start by supplying medical X-ray films to small clinics, imaging labs, and rural healthcare facilities.

Moreover, X-ray film wholesalers and distributors can expand by offering multiple sizes and formats to serve both medical and industrial customers. Private label sourcing from X-ray film manufacturers also allows buyers to build their own medical consumables brand. Besides, bulk procurement from X-ray films dealers and X-ray films traders helps reduce overall price and improve profit margins. As healthcare infrastructure continues to grow, many regions still rely heavily on film-based imaging systems. In such scenarios, sourcing from reliable X-ray film exporters provides long term growth and steady order volumes. 



Global X-Ray Films Trade Overview: Top Exporters and Key Market Trends

Did you know that the global X-ray film market size was valued at USD 1.38 billion in 2025? The market is further expected to grow at a CAGR of 4.90%, reaching around USD 2.11 billion by 2034. It is also important to note that the increasing use of X-ray films in industrial non-destructive testing (NDT) applications is a major factor contributing to this growth. Raw material costs such as silver halide and polyester base films often influence the X-ray film price. Beyond overall market figures, you should also be aware of the leading X-ray film exporters worldwide, given below.

Top X Ray Film Exporters Worldwide:

Country NameTotal Shipments
United States767
China254
India151

(Source: Volza)




How to Find Verified X-Ray Film Suppliers Near Me Or Globally?

The process of finding trusted X-ray film traders or suppliers becomes a lot easier and faster when you know the right methods.

  • First of all, you can sign up on online B2B marketplaces like go4WorldBusiness to connect with verified X-ray films suppliers
  • If you have the budget and time to make a few trips, you can attend international medical and healthcare trade fairs like MEDICA, Arab Health, RSNA Annual Meeting, Medical Fair Asia, etc. At these events, you can meet X-ray film manufacturers and suppliers in person
  • You can also connect with X-ray film distributors, exporters, and dealers through professional networks like LinkedIn or import export export-focused Facebook groups
  • Another easy way is to search online using keywords such as 'bulk X-ray film suppliers near me' or 'where to find X-ray films at best price


Frequently Asked Questions (FAQs)


1. What are the types of X-ray films?

Most sought after X-ray film types include medical X-ray film, blue sensitive film, green sensitive film, dry process film, laser imager film, mammography film, and industrial x-ray film.

2. Which countries are the main exporters of medical X-ray film?

The United States, China, and India are the major medical X-ray films exporters worldwide.

3. How can I verify the quality and authenticity of X-ray film from overseas suppliers?

In order to verify the quality and authenticity, you should request product samples, test reports, and certifications. Working with trusted B2B platforms that give you access to pre-vetted X ray films suppliers also reduces risk.

4. What international certifications are required for importing X-ray film?

Common certifications that you need to import X-ray film include ISO 13485, CE marking, and compliance with local medical device regulations.

5. What is the typical shelf life of X-ray film in international shipments?

Most medical X-ray films have a shelf life of 18 to 24 months when stored under recommended conditions.

6. How is X-ray film packaged to prevent damage during global transport?

Manufacturers use moisture resistant, lightproof, and temperature controlled packaging to protect films during transit.

7. How do manufacturers ensure consistent sensitivity and contrast in X-ray film?

They use controlled coating processes, precision emulsion technology, and strict quality checks throughout production.

8. What raw materials are used in medical X-ray film production?

Key raw materials used in medical X-ray film production are silver halide emulsions, polyester film base, and protective coatings.

9. How long does international delivery of X-ray film usually take?

The international delivery of X-ray film usually takes 10 to 30 days, depending on production time, shipping mode, as well as destination.

10. Does X-ray film require special import permits in certain countries?

Some countries require medical device registration or import licenses. As a buyer, you should always check local regulations.

11. Is X-ray film classified as a controlled or hazardous product in international trade?

X-ray film is generally not hazardous, but it may be regulated as a medical consumable in some regions.

12. How to find reliable x-ray films suppliers worldwide?

The easiest way is to connect with verified X-ray films suppliers, X-ray films wholesalers, and X-ray films exporters through trusted B2B platforms like go4WorldBusiness.