The products are dedicated wires for stator windings of submersible pumps, including polyethylene insulation (70?), cross-linked polyethylene insulation (90?), crossed-linked polyolefin insulation (125?) and high temperature type (150?), 4 types and over100 sizes in all.
Diameter of single strand: f0.6/1~f3.8/1,
Diameter of multi strand: f0.75/7~f1.12/7 and f0.63/19~f1.5/19.
Product Description
We are a reputed entity in the industry, actively engaged in offering an optimum quality range of Submersible Winding Wire.
Available in single multi stand from 0.5 mm to 4.0 mm and above
Details:
Water Resistant: Designed for underwater application for submersible pump motor
Tear Resistant: propagation of tear is difficult as the insulation is oriented bi-axially
DI Electric Strength: The multiple layer construction of submersible winding wire ensures high dielectric quality of insulation and places the insulations concentrically around the conductor
Higher Mechanical Strength: Submersible winding wire insulation is remarkably resistant to cut through and scrap abrasion. Thin cross sections ensures greater cut through stress and prevents general abuse
Least Current Leakage: Submersible winding wires have constant and many times higher insulation resistance even at the boiling point of water and the current leakage is minimal
Easy Winding: Since the overall diameter of Submersible winding wires is less than the conventional PVC winding wire, the winding resistance is less and the submersible pump motor is easy to wind
High Tensile Strength: In submersible winding wires, the insulation adds significantly to the tensile strength as it supports the wire at each point wherever excessive stretching occurs
Longer Life: The insulating material in Submersible winding wires is produced by biaxially oriented synthetic film and has a very long life.
Copper and Aluminum ( enameled ) winding wire for motors and energy products.
Areas of application :
- Automobile
- Starters
- Alternators
- Small Motors
- Electric Vehicles
- Fans
- Home Appliances
- Capital Goods ( transformers / generators )
Polyethylene insulated nylon jacket water resistant winding wire
this product is applied to water-filled submersible pump motor of A.C rated voltage 450/750V and the electronics working under similar conditions, simplified PE+PA wire
Features:
1. PE+PA wire rated AC voltage U./U is 450/750V
2. PE+PA wire is applied to long-time working in water, PH value 6.5-8.5
3. PE+PA wire long-time working temperature should be less than 70 degrees
4. The outstanding characteristic of PE+PA wire is oil-resisant and water-resistant
PP-insulation water resistance winding wire
This product is applied to water-filled submersible pump motor of A.C rated voltage 450/750V and the electronics working under similar conditions, simplified PP wire.
Features;
1. PP wire rated AC voltage U¡£/U is 450/750V
2. PP wire is applied to long-time work in water, PH value 6.5-8.5
3. PP wire long-time working temperature should be less than 80 degree
4. The outstanding characteristic of PP wire is relatively thin insulation.
Modified-Fluoroplastic insulation heat resistance submersible motor winding wire
This product is applied to water-filled high temperature submersible pump motor of A.C rated voltage 600/1000V and the electronics working under similar conditions, simplified FE wire.
1. FE wire rated AC voltage U¡£/U is 600/1000V
2. FE wire is applied to long-time work in water, PH value 3-10
3. FE wire long-time working temperature should be less than 150 degree
4. The outstanding characteristic of FE wire is tolerant to hot water.
Polyethylene insulated nylon jacket water resistant winding wire
this product is applied to water-filled submersible pump motor of A.C rated voltage 450/750V and the electronics working under similar conditions, simplified PE+PA wire
Features:
1. PE+PA wire rated AC voltage U./U is 450/750V
2. PE+PA wire is applied to long-time working in water, PH value 6.5-8.5
3. PE+PA wire long-time working temperature should be less than 70 degrees
4. The outstanding characteristic of PE+PA wire is oil-resisant and water-resistant
PP-insulation water resistance winding wire
This product is applied to water-filled submersible pump motor of A.C rated voltage 450/750V and the electronics working under similar conditions, simplified PP wire.
Features;
1. PP wire rated AC voltage U¡£/U is 450/750V
2. PP wire is applied to long-time work in water, PH value 6.5-8.5
3. PP wire long-time working temperature should be less than 80 degree
4. The outstanding characteristic of PP wire is relatively thin insulation.
Modified-Fluoroplastic insulation heat resistance submersible motor winding wire
This product is applied to water-filled high temperature submersible pump motor of A.C rated voltage 600/1000V and the electronics working under similar conditions, simplified FE wire.
1. FE wire rated AC voltage U¡£/U is 600/1000V
2. FE wire is applied to long-time work in water, PH value 3-10
3. FE wire long-time working temperature should be less than 150 degree
4. The outstanding characteristic of FE wire is tolerant to hot water
Enamelled wire refers to a type of wire that uses copper winding wire 36 swg as a conductor, is coated with insulating paint on its surface, and is cured into insulated wire after baking.
It can isolate current and act as a conductor in electrical equipment. At the same time, it has certain high-temperature resistance and mechanical strength, suitable for electrical equipment with high temperature, high frequency, and high voltage.
Advantages of Using Copper Enameled Wire Over Other Materials
Good conductivity: Copper has excellent conductivity, which makes devidayal copper winding wire have a high efficiency in transmitting current and low losses.
High thermal stability: class h enamelled copper wire able to withstand high working temperatures, suitable for environments with high loads and long-term operation.
Good mechanical strength and flexibility: suitable for various needs during winding and installation processes.
Excellent chemical stability and insulation performance: providing good electrical safety.
Advantages of Using Copper Enameled Wire Over Other Materials
FAQs of 32 awg enameled copper wire
What is copper enameled wire?
Copper enameled wire is a thin copper submersible winding wire coated with a thin layer of insulation, typically a type of enamel or varnish. This insulated copper magnet wire prevents the wire from shorting when coiled tightly together.
What are the benefits of copper enameled wire?
Enamelled winding wire and copper winding wire 35 swg have high electrical conductivity due to the copper core.
Thermal resistance - various enamel types offer different temperature ratings.
Chemical resistance - the enamel coating protects the copper from corrosion.
Size variability - available in a wide range of diameters for various applications.
Aluminium enamel wire is an electromagnetic wire mainly made of electrical pure aluminum as the conductor material, and coated with a layer of insulating paint film on its surface. Electrical pure aluminum, with a purity usually above 99.95%, has a relatively low density (about 2.7E3 kg/M3), is lighter than copper, but has slightly lower conductivity than copper, generally 61.8% IACS (International Annealed Copper Standard).
Aluminium insulated wire is widely used in various electrical equipment, such as motors, transformers, solenoid valves, and household appliances, due to its lighter weight, lower cost, and good conductivity.
Advantages and Applications of Aluminium Enameled Wire
Advantages of super enamelled aluminium wire:
Cost effectiveness: Aluminum is relatively cheaper than copper, so using aluminum as a conductor for aluminium winding wire has a significant cost advantage
Lightweight: Aluminum has a lower density than copper, and under the same current carrying capacity, aluminum enameled wire is lighter in weight
Technological progress: With the improvement of surface treatment technology and insulation paint formula, the electrical and mechanical properties of modern aluminum enameled wires have been greatly improved, especially when combined with high-performance insulation paint to replace copper enameled wires within a certain range.
All of our commodities are concerned with the most esteemed hucksters of the business market which manufactured as per the worldwide quality measures. We, Imperial World Trade offers those commodities in particular requirements. Our vendor produces these commodities on operating high-quality element stuff and ingredients.
Features:
1) High hot impact performance
2) Good electric conductivity
3) Low weight
4) Ideal winding wire for electric machinery with short, periodic workloads
Specifications:
Diameter ranging from 0.1·ªmm-6.00mm,Gauge: AWG(39--50) SWG(5--38),insulating film as per customer required
Both in round and rectangular type
Application scope:
f= Application in light winding with high relative conduction, good heat emission, especially winding transmits high frequency sign
f= High frequency transformer, general transformer, inductance coil, electric motor, home electric motor and micro-motor magnet winding coil
f= Micro-motor rotor wing coil enameled wire
f= Acoustics wing coil, CD driver special enameled wire
f= Display turning winding coil
f= Demagnetized winding coil
f= Mobile phone inner wingding coil, water driver elements
f= Other special magnet wire
Packing term: Packed in Cartons on Pallet and Lined with Single Polymembrane Inside
The minimum order quantity: the total quantity(all size) one 20¦container
Payment term:T/T(40% payment at advance,60% within one week after receiving the copy of B/L)
Key advantages of coil winding nozzle/ wire guide nozzle.
1)High Wear Resistance
This is assured by the choice of materials for wear elements possessing. Hardness Value: 1800 ~ 2200Vickers, or 3times that of case hardened steel. Body material is stainless steel for structural supports, not wear-bearing.
2)Scratch-Proofing
Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.
3)Straightness and Stiffness
Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating? . In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.
4) Precise Exit Radii
Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.
Specification of coil winding nozzle/ wire guide nozzle.
Advantage of our coil winding accessaries
1. Precise coil winding accessaries such as wire guide pulley, magnetic damper, electric brake and nozzles.
2. Competitive price
3. Excellent quality of tension device and accessaries
4. Fast response speed
5. Professional tensioner engineering team
6. Good after-sales service
Key advantages of coil winding nozzle/ wire guide nozzle.
1)High Wear Resistance
This is assured by the choice of materials for wear elements possessing. Hardness Value: 1800 ~ 2200Vickers, or 3times that of case hardened steel. Body material is stainless steel for structural supports, not wear-bearing.
2)Scratch-Proofing
Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.
3)Straightness and Stiffness
Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating? . In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.
4) Precise Exit Radii
Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.
Specification of coil winding nozzle/ wire guide nozzle.
Advantage of our coil winding accessaries
1. Precise coil winding accessaries such as wire guide pulley, magnetic damper, electric brake and nozzles.
2. Competitive price
3. Excellent quality of tension device and accessaries
4. Fast response speed
5. Professional tensioner engineering team
6. Good after-sales service
Copper Clad Aluminum Wire (CCAW) is an electromagnetic wire product that uses copper-clad aluminum material as its inner conductor and is coated with an insulating paint film on its surface. This type of copper coated aluminum wire combines the advantages of both copper and aluminum metals: copper has good electrical conductivity, while aluminum significantly reduces the materials weight. Therefore, while maintaining high electrical conductivity, copper-clad aluminum wire also features lightweight characteristics.
Applications of Enameled Copper Clad Aluminum Winding Wire
enameled copper clad aluminum wire has excellent conductivity of copper and lightweight characteristics of aluminum, while providing good electrical insulation performance through insulation paint layer, and has a wide range of applications in multiple fields.
1. Motor, transformer, and electromagnetic coil
2. speaker coils
3. Household appliances
4. Copper clad aluminum electrical wire for electronic devices with
The following are some main uses of copper clad aluminum annealing wire:
1. Electrical engineering and electronic products: transformers, motor windings, electromagnetic coils, etc
2. High frequency transmission line
3. Cables and wires
Applications of Enameled Copper Clad Aluminum Winding Wire
FAQs of Enameled copper clad aluminium cable
Whats your company product scope?
We have many kinds of products, such as enameled magnet wire, Heat Shrinkable Sleeve, stranded copper clad aluminum wire, Silicone Tubing, and silicone coated fiberglass sleeve.
68289 Winding Wire Suppliers
Short on time? Let Winding Wire sellers contact you.
