K Series
Main features:
1. Smart push-pull self-latching system;
2. Multicore types with 2 to 26 pins;
3. Solder or PCB contacts (straight and elbow);
4. High packing density for space saving;
5. Different kinds of keying options to avoid mismatching;
6. 360 degree screening for full EMC shielding;
7. Waterproof connecter (IP66 to 68);
8. Rugged housing for extreme working conditions;
9. Interchangeable with LEMO&ODU connector.
WS2812B Led Lights DC5V WS2812 RGB Led Strip Light Individually Addressable Smart Pixels Magic Light Black White PCB IP30 65 67
Product sellpoints
High-quality LED Chip. Instead of others' alloy chip wire or copper chip wire, This WS2812B RGB LED use Pure Gold Wires inner, which more stable, have exceptional quality, ultra bright, less light decay and longer life.
Individually Addressable SPI LED. Dream full color Programmable LED Strip, 256 brightness display and 24-bit color display. The addressable WS2812B IC chip is built-in the 5050SMD. Each pixel can have its own color and brightness as your wish.
Easy Using. It comes with 3pin JST-SM connectors on both ends for easy installation and separated power/ground wires on both ends. Each LED is cuttable. You can shorten, lengthen or bend it freely if you want. Can be connected in series or parallel.
Only Support DC5V. Match use controller can appear colorful curtain-up/ flow water/raindrop/jump flash and so on hundreds of lighting effect, you can also edit animation effect by Coreldraw/Flash/LedEdit software.
Widely Application. Making led screen, led wall, advertising board, apply to hotel, advertising signs, Festivel decoration. There is adhesive tape on IP30/IP65 LED strip's back, so you can stick it to the wall or other items conveniently as you like.
Electronic components motorcycle parts and auto parts like ic, adapter, connector, sensor, module, fuse, transformer, capacitor, resistor, led light, diode, triode, switch, buzzer, potentiometer, relay and spark plugs..
Temperature Sensor Accessories are essential components that support the accurate, safe, and efficient operation of temperature sensing devices such as RTDs, thermocouples, thermistors, and digital sensors. Designed for industrial, commercial, and laboratory use, these accessories enhance sensor performance, ensure reliable signal transmission, and protect the sensor in harsh environments.
â?? Key Features:
Compatible with RTD, thermocouple (K, J, T, etc.), and digital temperature sensors
Designed for easy installation, calibration, and maintenance
Made from durable materials like brass, stainless steel, aluminum, or plastic
Withstands high temperatures, corrosive media, and vibration
Available in custom thread sizes, cable lengths, and mounting styles
Ensures signal integrity and sensor protection in field conditions
ð??§ Available Accessories Include:
Thermowells â?? Protective sleeves for sensors in high-pressure/temperature environments
Compression Fittings & Adaptors â?? Secure and leak-proof sensor mounting
Terminal Heads & Enclosures â?? Weatherproof and explosion-proof housings
Cable Glands & Bushings â?? Secure wire entries with strain relief
Mounting Brackets & Flanges â?? For stable and accurate sensor placement
Connectors & Extension Cables â?? For signal transmission and modular installation
Ceramic Beads & Insulators â?? For high-temperature applications
ð?? ï¸? Applications:
Industrial automation and process control
Power generation and utility monitoring
Chemical and pharmaceutical manufacturing
Food processing and thermal mapping
Laboratory and scientific instrumentation
K Series
Main features:
1. Smart push-pull self-latching system;
2. Multicore types with 2 to 26 pins;
3. Solder or PCB contacts (straight and elbow);
4. High packing density for space saving;
5. Different kinds of keying options to avoid mismatching;
6. 360 degree screening for full EMC shielding;
7. Waterproof connecter (IP66 to 68);
8. Rugged housing for extreme working conditions;
9. Interchangeable with LEMO&ODU connector.
K Series
Main features:
1. Smart push-pull self-latching system;
2. Multicore types with 2 to 26 pins;
3. Solder or PCB contacts (straight and elbow);
4. High packing density for space saving;
5. Different kinds of keying options to avoid mismatching;
6. 360 degree screening for full EMC shielding;
7. Waterproof connecter (IP66 to 68);
8. Rugged housing for extreme working conditions;
9. Interchangeable with LEMO&ODU connector.
Parts of connector:
1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome;
2) Pin and jack made of copper alloy, plated with gold;
3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating;
4) Sleeve molded with soft plastic to protect cables
K Series
Main features:
1. Smart push-pull self-latching system;
2. Multicore types with 2 to 26 pins;
3. Solder or PCB contacts (straight and elbow);
4. High packing density for space saving;
5. Different kinds of keying options to avoid mismatching;
6. 360 degree screening for full EMC shielding;
7. Waterproof connecter (IP66 to 68);
8. Rugged housing for extreme working conditions;
9. Interchangeable with LEMO&ODU connector.
Parts of connector:
1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome;
2) Pin and jack made of copper alloy, plated with gold;
3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating;
4) Sleeve molded with soft plastic to protect cables
K Series
Main features:
1. Smart push-pull self-latching system;
2. Multicore types with 2 to 26 pins;
3. Solder or PCB contacts (straight and elbow);
4. High packing density for space saving;
5. Different kinds of keying options to avoid mismatching;
6. 360 degree screening for full EMC shielding;
7. Waterproof connecter (IP66 to 68);
8. Rugged housing for extreme working conditions;
9. Interchangeable with LEMO&ODU connector.
Parts of connector:
1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome;
2) Pin and jack made of copper alloy, plated with gold;
3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating;
4) Sleeve molded with soft plastic to protect cables
K Series
Main features:
1. Smart push-pull self-latching system;
2. Multicore types with 2 to 26 pins;
3. Solder or PCB contacts (straight and elbow);
4. High packing density for space saving;
5. Different kinds of keying options to avoid mismatching;
6. 360 degree screening for full EMC shielding;
7. Waterproof connecter (IP66 to 68);
8. Rugged housing for extreme working conditions;
9. Interchangeable with LEMO&ODU connector.
Parts of connector:
1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome;
2) Pin and jack made of copper alloy, plated with gold;
3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating;
4) Sleeve molded with soft plastic to protect cables
K Series
Main features:
1. Smart push-pull self-latching system;
2. Multicore types with 2 to 26 pins;
3. Solder or PCB contacts (straight and elbow);
4. High packing density for space saving;
5. Different kinds of keying options to avoid mismatching;
6. 360 degree screening for full EMC shielding;
7. Waterproof connecter (IP66 to 68);
8. Rugged housing for extreme working conditions;
9. Interchangeable with LEMO&ODU connector.
Parts of connector:
1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome;
2) Pin and jack made of copper alloy, plated with gold;
3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating;
4) Sleeve molded with soft plastic to protect cables
K Series
Main features:
1. Smart push-pull self-latching system;
2. Multicore types with 2 to 26 pins;
3. Solder or PCB contacts (straight and elbow);
4. High packing density for space saving;
5. Different kinds of keying options to avoid mismatching;
6. 360 degree screening for full EMC shielding;
7. Waterproof connecter (IP66 to 68);
8. Rugged housing for extreme working conditions;
9. Interchangeable with LEMO&ODU connector.
Parts of connector:
1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome;
2) Pin and jack made of copper alloy, plated with gold;
3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating;
4) Sleeve molded with soft plastic to protect cables
K Series
Main features:
1. Smart push-pull self-latching system;
2. Multicore types with 2 to 26 pins;
3. Solder or PCB contacts (straight and elbow);
4. High packing density for space saving;
5. Different kinds of keying options to avoid mismatching;
6. 360 degree screening for full EMC shielding;
7. Waterproof connecter (IP66 to 68);
8. Rugged housing for extreme working conditions;
9. Interchangeable with LEMO&ODU connector.
K Series
Main features:
1. Smart push-pull self-latching system;
2. Multicore types with 2 to 26 pins;
3. Solder or PCB contacts (straight and elbow);
4. High packing density for space saving;
5. Different kinds of keying options to avoid mismatching;
6. 360 degree screening for full EMC shielding;
7. Waterproof connecter (IP66 to 68);
8. Rugged housing for extreme working conditions;
9. Interchangeable with LEMO&ODU connector.
Parts of connector:
1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome;
2) Pin and jack made of copper alloy, plated with gold;
3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating;
4) Sleeve molded with soft plastic to protect cables
K Series
Main features:
1. Smart push-pull self-latching system;
2. Multicore types with 2 to 26 pins;
3. Solder or PCB contacts (straight and elbow);
4. High packing density for space saving;
5. Different kinds of keying options to avoid mismatching;
6. 360 degree screening for full EMC shielding;
7. Waterproof connecter (IP66 to 68);
8. Rugged housing for extreme working conditions;
9. Interchangeable with LEMO&ODU connector.
Parts of connector:
1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome;
2) Pin and jack made of copper alloy, plated with gold;
3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating;
4) Sleeve molded with soft plastic to protect cables
The PWSMini is designed by Dr. Sten L�¶fving is a spin off from our MiniOFS sensor and it is probably the cheapest Present Weather Sensor on the market. And it is very compact - the width is only 68 mm. This little sensor measures 3 important weather parameters. (1) Visibility (2) Rain - the response is fast compared to that from a tipping bucket. The threshold is also lower. (3) Snow - same as for rain - note that a simple tipping bucket sensor does not detect snow in many cases. Besides that two other weather parameters are measured and displayed: Ambient light - the resolution and accuracy is not as good as for special sensors like solarimeters but the information is useful for giving answers to questions like telling if it is cloudy or not or of course if night or day. Temperature - the temp. sensor is located inside the sensor body and the accuracy is therefore not better than about 2 deg C. (But this is in some cases good enough - trends can be seen etc.)
Brand Name :PERLINK
Model Number :1P.3PIN.LP
Certification :CE/RoHS
Place of Origin :SHENZHEN
MOQ :5 pcs
Price :$ 0.5-5 pcs
Payment Terms :L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability :11254 per weeks
Delivery Time :2-3 days
Packaging Details :plastic + cartons
Warranty :5000 Times Mating
Insert Material :PPS&PEEK
Salt Spray Corrosion : :>48 hr
Line length :Can be customized (mm)
Type :Straight plug with cable collet
Working temperature :-40°~80°C
Gender :female and male, male and female
Type :Adapter
Contact Treatment :Plated gold
IP rate :IP50
Application :Military equipment
Sample Free :1-2 PCS
Fast lead time :2-3 days
Operating Temperature; :-55°C ~ 250°C
Current Rating (Amps) :5A
Color :Silver
Fastening Type :Push-Pull
Number of Positions :3
Categories :Connectors, Interconnects Circular Connectors
Industry Application:
Medical connector: Analyzers, Processing Equipment, Dental Equipment, Electrosurgical Devices, Pacemakers and Hearing Devices;
Audio-video connector: HDTV/Media Converter, Remote Cam / Motion Pict Cam(Indoors/outdoors), Analog Audio/Video, Digital Audio, Lighting - Indoors/outdoors;
Test & Measurement connector: GPS (portable or vehicle mounted), High Voltage Experiments, Meters, Sources, Analyzers, Weather Sensors, Quality Inspections;
Information system connector: Authentication Devices, Computers (outdoors), Input Devices,Printers/Copiers,
1. We have lots of these similar products with very competitive price
2. Auto series.We have 1-121 pins.
3. All kinds of auto connector are good qualtiy
4. If you need auto connector add wire style, we also can do.
5. We also can give you mould development service to supply you the items which you can not find directly in the current market.
6.Our auto connector are very popular in the world market.They have been exported to u.S.A, france, germany, australia, belgium, argentina, the middle east, taiwan, thailand and so on
100/200/300/500/1000pcs per bag with label, export standard carton.
