Find Verified Ultra Low Sulphur Diesel Suppliers, Manufacturers and Wholesalers

EN590 10ppm is a high-quality automotive diesel fuel that meets the European standard EN 590 and contains a maximum sulfur content of 10 parts per million (ppm).

Key Specifications of EN590 10ppm Diesel
Sulfur Content: Maximum 10 ppm (0.001%)
Fuel Type: Ultra-Low Sulfur Diesel (ULSD)
Standard: EN 590
Application: Diesel-powered cars, trucks, generators, construction equipment, and marine engines (where permitted)
Environmental Benefit: Lower sulfur emissions, reduced particulate matter, and compatibility with modern emission-control systems.

Typical EN590 Parameters
Property Typical Value
Sulfur Max 10 ppm
Cetane Number Min 51
Density @ 15C 820-845 kg/m³
Flash Point Min 55C
Water Content Max 200 mg/kg
Lubricity (HFRR) Max 460m

Why Buyers Prefer EN590 10ppm
Cleaner combustion and lower emissions.
Suitable for modern Euro 5 and Euro 6 diesel engines.
Better engine performance and fuel efficiency.
Widely accepted for international diesel trading.
Often required by environmental regulations in Europe and many other regions.

In International Oil Trading, EN590 10ppm is one of the most commonly traded diesel grades. It is frequently offered through:

Spot contracts
Annual supply contracts
Tank-to-Tank (TTT)
Tank Takeover (TTO)
FOB (Free on Board)
CIF (Cost, Insurance & Freight).

Ultralow sulfur diesel ULSD is a cleanerburning diesel fuel that contains a maximum of 15 parts per million ppm of sulfur ULSD contains 97 less sulfur than lowsulfur diesel LSD which typically contains 500 ppm of sulfur The European Union began mandating the reduction of diesel sulfur content in 1993 and the United States started phasing in ULSD requirements for highway vehicles in 2006 It was developed to allow for the use of improved pollution control devices that reduce diesel emissions ULSD can significantly reduce emissions when used in combination with cleanerburning diesel engines and vehicles It may react with strong acids or strong oxidizing agents such as chlorates nitrates and peroxides You should avoid contact with heat sparks fire and oxidizing agents The appearance of ULSD should be clear and bright free from visible sediment and water

Diesel Gas Oil Ultra-Low Sulphur Diesel (ULSD) is a refined diesel fuel with significantly reduced sulfur content, meeting stringent environmental standards. It ensures cleaner emissions, improved engine performance, and fuel efficiency, making it ideal for modern diesel engines in transportation and industrial applications.

EN590 10 PPM Diesel is a low-sulfur automotive diesel fuel designed to meet the requirements of the European diesel fuel specification EN 590, with sulfur content limited to a maximum of 10 mg/kg (10 ppm). It is suitable for modern diesel engines and is widely used for passenger vehicles, commercial vehicles, generators, agricultural machinery and industrial equipment.

Cetane Number : 51
Cetane Index : 46
Density at 15C : 820 - 845 kg/m
Flash Point : 55C
Water Content : 200 mg/kg

Ultra-low sulfur content of up to 10 ppm
Designed for modern diesel engines
Helps reduce sulfur-related emissions
Suitable for advanced emission-control systems
Good ignition characteristics with high cetane quality

Please find here below one of our USA suppliers ULSD offer, if of firm interest please let us know, fast loading, quality product, safe trade (USA company and USA World top5 Bank) and good commission here,

Seller: USA Company
Loading Port: Houston Texas
Origin: USA
Goods: ULSD (ULTRA LOW SULPHUR DIESEL)
Quantity: 10.000MT (No more, no less)
Specs: 10PPM ULSD OR 15PPM ULSD (AT BUYER OPTION
Loading: 7-10bdays after payment (SO FAST LOADING HERE)
Price: 290USD FOR 10PPM / 280USD FOR 15PPM FOR Any safe European or African (No Somalia) or Middle East Ports (No Syria or Iran) or India, Pakistan, Singapore.
Payment: 10.000MT 's %15 will pay against proforma and loading start , %55 will pay after loading against BL, Origin Certif., SGS report and balance %30 after delivery against second inspection at delivery portbefore
discharging

P.S1.: For save time please tell your buyer they calculate voyage time to delivery port, do not ask us how many days it take to xxx portâquestion.!Loading port is: Houston to

Remarks :

1- Delivery port name should give by buyer
2- Buyer full details address, phone email must give (no ghost buyer)
3- BUYER BANK FULL DETAILS

Sales Terms (Not open for negotiations) :

1-) BUYER GIVE ABOVE 3 INFORMATION !
2-) Seller sends Proforma SPA for both side sign and stamp
3-) Buyer will pay products %15 prepayment by Bank Transfer to seller account at World Top5 USA bank JP Morgan Chase NY Commercial branch (as everybody knows, this Branch open account only trusted USA companies not small or foreigner owned companies)
4-) Loading process will start on time.
5-) After Loading and SGS report with B/L buyer will pay %55 of amount (after verification documents)
6-) Vessel start sails to buyer designated port, after %55 payment received by seller
7-) When the vessel delivered discharging port, buyer can make second SGS inspection (at their cost) and makes balance %30 payment before discharging
8-) NO LC NO ESCROW NO BG, SALES MAKE WITH ABOVE GIVEN TERMS ONLY!
9-) NO CONTRACT THIS IS SPOT SALES


PS1: Inspection will make by SGS only for loading port (at seller cost) and if of request at discharging port same (at buyer cost)

Validity: 3 business days from now on. (TILL WEDNESDAY FOR PROFORMA SIGN AND PRE-PAYMENT)

Dear Friends and Partners,

Good day,

Please find here below one of our USA suppliers ULSD (15PPM) offer, without ADVANCE- it basis of SBLC and after delivery payment.

Seller : uSA Company
Loading Port: Houston Texas
Origin : USA

Goods: ULSD (15ppm ULTRA LOW SULPHUR DIESEL)
Quantity : 80.000MT Minimum â?? 100.000MT maximum
Specs : 15PPM ULSD
Loading : 35-45 bdays after received SBLC (bcz of covid-19 it is still fast loading time)
Price : 295USD FOR 15PPM FOR Any safe European or African or Middle East Ports or India, Pakistan, Singapore. // Yemen and Somalia 310USD PMT
Payment : SBLC issue from buyer bank and send by swift / Payment will make by Mt-103 after delivery!

P.S1.: For save time please tell your buyer they calculate voyage time to delivery port, :

1- Delivery port name should give by buyer
2- Buyer full details address, phone email must give (no ghost buyer)
3- BUYER BANK FULL DETAILS

Sales Terms (Not open for negotiations) :

1-) BUYER GIVE ABOVE 3 INFORMATION !
2-) Seller sends Proforma SPA for both side sign and stamp
3-) Buyer bank send SBLC
4-) Loading process will start on time.
5-) After delivery and SGS inspection buyer pay amount by MT-103 in 24 hours before discharging.

PS1: Inspection will make by SGS only for loading port (at seller cost) and if of request at discharging port SGS inspection (at buyer cost)

Validity: 5 business days from now on. for contract sign and SBLC

EN 590 10 PPM
JET FUEL AI
D 6

Product Grade

ULSD 10 PPM

Minimum Price (USD)

Contact Supplier

Maximum Price (USD)

Contact Supplier

Price Units

USD / Metric Ton

Incoterms

FOB / CIF

Product Detailed Description

Ultra Low Sulfur Diesel (ULSD) is a refined diesel fuel characterized by its very low sulfur content. It is suitable for modern diesel engines, commercial transportation, industrial equipment, generators, and other compatible applications. The product is available for bulk international B2B supply, subject to agreed specifications, quantity, inspection, availability, and delivery terms.

Minimum Order Qty

1,000

Units

Metric Ton (MT)

Packaging Details

Bulk

Production Capacity

As per confirmed order and product availability

Country Where Product Is Manufactured

Oman (use this only if Oman is the actual country of origin)

Sample Available

No

Sample Cost Born By

Buyer

Seller Product Code

ULSD-10PPM

Product Standards

Applicable ULSD specification / EN 590 where applicable

Brand

Unbranded

Model No.

N/A

HS Code

2710.19

Key Specifications 1

Sulfur Content: Maximum 10 ppm

Key Specifications 2

Cetane Number: Minimum 51; Density at 15�°C: 820â??845 kg/m�³

Key Specifications 3

Flash Point: Minimum 55�°C; Water Content: Maximum 200 mg/kg

Key Specifications 4

Suitable for commercial vehicles, heavy-duty transportation, industrial generators, power equipment, and other compatible diesel applications.

Key Advantage 1

Very low sulfur content suitable for applications requiring ultra-low sulfur diesel.

Key Advantage 2

Suitable for modern diesel engines and international B2B fuel requirements.

Key Advantage 3

Product quality can be verified against agreed specifications through inspection and laboratory testing where required.

Key Advantage 4

Available for bulk international supply with flexible quantity, delivery, inspection, and shipping arrangements.

ULSD is a cleaner-burning diesel fuel that contains 97% less sulfur than low-sulfur diesel (LSD). ULSD was developed to allow the use of improved pollution control devices that reduce diesel emissions more effectively but can be damaged by sulfur

Origins: Russia

(EN590) 10 PPM/50PPM
Origin: Kazakhstan
The detailed specification: Meets all International Standards
Total Spot quantity order: 100,000MT
The price and discount:
- FOB ROTTERDAM AND CIF OTHER COUNTRY: DISCOUNT $50 PER MT
FROM NWE PLATTS
- CIF ASIA: DISCOUNT $70 PER MT FROM SINGAPORE PLATTS
Shipment:
- TANK TO VESSEL ROTTERDAM PORT or DESTINATION PORT as per
conditions in Seller`s FCO
Payment terms: As agreed per attached Seller`s SCO / FCO and PROCEDURE, via
MT103
Payment Procedure: According to the terms of the contract, to be mutually agreed upon
by Buyer & Seller.
Inspection: SGS for Quantity and Quality, at embarkation port, DIP TEST

We sell Oil and Gas Products
Wholesale Ultra -low sulphur diesel ( EN590) Liquified natural gas Liquified petroleum gas Ultra -low sulphur diesel ( EN590) Light cycle oil Petroleum coke Eastern Siberia-pacific ocean oil ( espo) Jet fuel A1 Mazut Aviation fuel A-1 & Jp54 Bitumen Base oil Diammonium phosphate Naphtha Ultra Low Sulfur Diesel EN590,DIESEL D2,DIESEL VIRGIN OIL D6

ULTRA -LOW SULPHUR DIESEL EN 590 10 PPM
A1 JET FUEL
D6

NSRIC Green Supplies Inc. (NGS) is your trusted, licensed intermediary for secure and efficient global trade of Ultra Low Sulfur Diesel (ULSD). As environmental regulations tighten worldwide, the demand for this cleaner, high-performance fuel is critical. NGS specializes in bridging the gap between verified end sellers and serious end buyers, ensuring a transparent, compliant, and profitable transaction every time.

Our expertise is rooted in managing the complex logistics and documentation required for international petroleum trading. We handle the intricacies of supply chain security, quality assurance, and legal compliance, allowing our B2B clients and traders to focus on their core business.

By partnering with NGS for your ULSD needs, you gain access to a global network of trusted suppliers, guaranteeing a consistent and reliable supply of high-specification fuel that meets the strictest international standards. Secure your long-term ULSD supply chain through our professional intermediary services and mitigate the risks associated with global commodity trading. Contact NGS today to discuss your specific tonnage requirements.

EN590 10ppm Ultra Low Sulfur Diesel (ECO-5) produced in accordance with European quality standards. This diesel fuel is designed for modern diesel engines and delivers reliable performance, efficient combustion, and reduced emissions. The product features a minimum cetane index of 47.2, sulfur content not exceeding 10 ppm, density of 835.6 kg/m�³ at 15�°C, and a flash point of 61�°C. It also offers excellent lubricity, low polycyclic aromatic content, controlled water and impurity levels, and a filterability temperature suitable for cold weather applications.

Each shipment is supplied with a complete Certificate of Analysis and supporting quality documentation confirming compliance with the stated specifications. Suitable for industrial, commercial, marine, and wholesale fuel distribution markets. Product quality, quantity, and documentation are verified prior to delivery to ensure compliance with contractual requirements.

Product Grade

Automotive Diesel / EN 590

Minimum Price (USD)

Contact Supplier

Maximum Price (USD)

Contact Supplier

Price Units

USD / Metric Ton

Incoterms

FOB / CIF

Product Detailed Description

Automotive Diesel is a refined fuel designed for use in diesel-powered vehicles and transportation equipment. It is suitable for commercial vehicles, passenger vehicles, heavy-duty trucks, buses, and compatible diesel engines. The product can be supplied in bulk for international B2B requirements, subject to agreed specifications, quantity, availability, inspection, and delivery terms.

Minimum Order Qty

1,000

Units

Metric Ton (MT)

Packaging Details

Bulk

Production Capacity

As per confirmed order and product availability

Country Where Product Is Manufactured

Oman (only if this is the actual country of origin)

Sample Available

No

Sample Cost Born By

Buyer

Seller Product Code

AUTO-DIESEL

Product Standards

EN 590 / Applicable Automotive Diesel Specification

Brand

Unbranded

Model No.

N/A

HS Code

2710.19

Key Specifications 1

Sulfur Content: As per applicable diesel fuel specification

Key Specifications 2

Cetane Number: As per agreed product specification

Key Specifications 3

Density, flash point, distillation characteristics, lubricity, and water content according to the applicable product specification.

Key Specifications 4

Suitable for passenger vehicles, commercial trucks, buses, heavy-duty vehicles, generators, and other compatible diesel engines.

Key Advantage 1

Suitable for a wide range of diesel-powered automotive and commercial applications.

Key Advantage 2

Designed to provide reliable fuel performance for transportation and heavy-duty operations.

Key Advantage 3

Product quality can be verified against agreed specifications through inspection and laboratory testing where required.

Key Advantage 4

Available for bulk B2B supply with flexible quantity, delivery, inspection, and international shipping arrangements.

Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature).

Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine.

The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades:

L - summer, used at ambient temperatures above 0 C;
3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation <-35 C and n <-25 C), or winter, used at temperatures up to -30 C, then the fuel must have a stasis <-45 C and n <-35 C);

- Arctic diesel fuel, the temperature of which is up to -50 C. The sulfur content in diesel fuel of grades L and Z does not exceed 0.2% for type I fuel and 0.5 for type II fuel, and grade A 0.4%

Diesel EN590 is a premium ultra-low sulfur automotive diesel fuel manufactured in accordance with European EN590 specifications. It is designed to provide efficient combustion, lower emissions, improved engine performance, and compatibility with modern diesel engines. Sulfur content is maintained at a maximum of 10 ppm to meet international environmental standards. Suitable for automotive, industrial, transportation, and commercial applications. Available for bulk export shipments with flexible packaging and logistics arrangements.

NSRIC Green Supplies Inc. (NGS) is your trusted licensed intermediary for securing Low-Sulfur Diesel Oil (LSDO) in the global energy market. As a critical and environmentally preferred fuel, LSDO is essential for shipping, industrial operations, and transportation, offering a cleaner, more efficient energy solution compliant with stringent international emission standards.

We specialize in connecting vetted, serious end buyers with reliable international sellers, ensuring a streamlined and secure transaction process from inquiry to final delivery. Our expertise covers the full spectrum of global trade operations, including comprehensive due diligence, secure payment management, and logistics coordination.

NGS facilitates both spot purchases and long-term supply contracts for LSDO, providing stability and competitive pricing for your enterprise. Partner with us to navigate the complexities of global oil and gas commodity trading with confidence. Focus on your business growth while we guarantee the integrity and profitability of your LSDO supply chain. Contact us today to discuss your specific volume and delivery requirements.