The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
Disposable Isolation Gowns PP 45gsm Non-Woven Material Apron
QUALITY ISOLATION GOWNS- Stay clean, safe and comfortable in disposable isolation gowns.� 45gsm material, thermal bonded seams, elastic cuffs and� closure back collar for high-quality comfort.
BREATHABLE AND LIGHTWEIGHT- Made with breathable, non-woven material,� lightweight isolation gowns are designed for all-day comfort and high-performance use to tackle even the toughest tasks.
PRACTICAL DESIGN- It's practically designed to include a double tie closed back and elastic cuffs to easily fit over gloves and clothes. All medical disposable gowns are unisex with a one size fits all design.
PREMIUM PROTECTION- Constructed with durable, fluid-resistant material offer premium protection against particle and fluid transfer for patients in isolation situations. and they are latex-free.
MULTIPLE USES- It's used for a variety of industrial and medical uses and settings including hospitals, dental offices, laboratories, clinics, pharmacies, standard isolation and more.
5.Electrical and electronic products, control board, motor, the external pad and mats, electronics, auto mechanics, Mainframe computer, laptop.
6.electronic applications and industries including computers, laptops, tablet PCs, smart phones, routers, solar, medical device, power supplies, wireless devices, and the automotive industry.
New Fashion Islamic Muslim Abaya Dress Women Chiffon Long Sleeve Polka Dot Dress Double layer Muslim Dress
Decoration: According to Customer Demands
Features: Eco-Friendly, Breathable, Quick Dry, Plus Size
Gender: Women
Colors: Custom Colors
Logo: Customized as Per Customer Demand.
Sizes: We Can Customize the Sizes and Measurements as Per Customer Demand. In
Other Case, We Can Offer UK Sizes, USA Sizes, European Sizes, International
Size Options. High Quality, Abaya, Kaftan, Breathable, Durable, Comfortable,
Prices of Orders: Depending on Quality, Order Quantity, Product Design
Sample Lead Time: Within 2-5 Days (Depend on Style)
Sample: Samples Charges Will Be Apply, But Freight Is Free
Shipping: By Sea, By Air, By Ship, Express
Monoblock pumps -
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
salient features
- High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP
- Specially designed for wide voltage operation
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life
- Back pull-out design for easy servicing and repair
- Double shielded ball bearings, so no need of external lubrication
- All Model fitted to Mechanical seal.
specification
- Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 32 Mtr.
- Maximum Flow Rate : 940 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Method of Starting : Permanent Split Capacitor (PSC)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40,
50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm)
characteristics of clear cold water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : EN-8
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Plastic
Item: Art Paper, Art Board , Couche paper , Gloss or Matte Art Paper, Coated Paper, Art Card , Coated 2 Sides Paper, Coated 1 Side Paper, C2S/C1S
Material: 100% wooden pulp
Coating:Coated 2 sides or Coated 1 side Gloss or Matte
Usage:Magazines, Magazine Covers, Calendars, Catalogues, Brochures, Posters, leaflets, labels, Digital Printing, etc.
Regular Basic weight (Grammage): 80gsm to 400gsm per square meter, such as 80gsm, 90gsm, 105gsm, 115gsm, 128gsm, 135gsm, 157gsm, 170gsm, 180gsm, 200gsm, 216gsm, 230gsm, 250gsm, 275gsm, 300gsm, 325gsm, 350gsm, 400gsm, etc..
Size: In sheets: 787 mm X 1092 mm, 889 X 1194 mm
In roll: 765mm, 787mm, 889mm
Or customized by clients' request.
Packing: 100 or 250 or 500 sheets /ream, packing in Kraft paper and in pallets. Or Roll.
Feature: High Printing Gloss, Low PPS Roughness, Good Opacity, Good Bulk, Good Stiffness, Excellent Ink-set, High Registering Accuracy, Outstanding Dot Fidelity, Good Saturation, High Sharpness, Best Printing Contrast, Excellent Printability, Excellent Printability, etc..
Heavy Nonwoven interlining with fusible PA. PES coating interlining for man --W8065
Bella Young
Skype: yang.bella6
Tel, Wechat , Whatsapp: 0086 138 2915 8200
Specification:
Heavy Nonwoven interlining with fusible PA. PES coating interlining for man--W8065
1.Item:W8018,W8030,W8035....
2.Composition:100% Polyester
3.Weight/Gsm:25gsm-200gsm
4.Color:White,Black, Charcoal….Any color can be custom
5.Width:40'', 44'', 48'', 60'' (1 Inch=2.54CM)
6.Usage:All kinds of fashion garments, like: Denim, Casual,Knit,Suits…
7.Coating:PA, PES, PA+PES mixed double dot coating
8.Washing conditions:Dry clean, Washable Dry clean, Washable
9. Fusing conditions:1)Temperature:130-145C
2)Pressure: 2-3 bar
3)Time: 10-15 s
Features
Item: Heavy Nonwoven interlining with fusible PA. PES coating interlining for man
1.Fit for woolen fabric, cotton fabric and their blend fabric.
2.Used in front parts and collar for men and ladies' garments.
3.Low-temperature press,great bonding effects.
Application:
Item: Heavy Nonwoven interlining with fusible PA. PES coating interlining for man
1. Mid-grade coat, High-grade jacket,suitable for polyester,cotton and P/C fabric.
2. Normal Suits for Man and Woman;
3. Jacket and Man's coat
4. Denim and Jeans
5. All kinds of Uniform.…
About Meltblown Nonwove
Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties
Application of spun-bond nonwoven fabrics:
Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc
Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �?�µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties
Application of spun-bond nonwoven fabrics:
Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc
Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �?�µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties
Application of spun-bond nonwoven fabrics:
Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc
About Meltblown Nonwoven
â?¢ Melt blown is a one step process to make fabrics from polymer.
â?¢ The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
â?¢ The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
â?¢ The main purpose of melt blown fabric is to provide barrier property for the liquid.
â?¢ Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
â?¢ Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
â?¢ Adjustable Pores And Capillary Structure
â?¢ Excellent barrier properties
â?¢ Filament size 1 -3 �µm
â?¢ High Elasticity
â?¢ High Filtration capability
â?¢ Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
â?¢ Large Area-to-weight ratio
â?¢ Self-bonding
â?¢ The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
â?¢ Very good thermal insulation for apparel application
â?¢ Weak tensile properties
â?¢ Wicking Properties
Application of spun-bond nonwoven fabrics:
â?¢ Sanitary and Hygiene:
â?¢ Sanitary napkins,
â?¢ Baby diapers and
â?¢ Incontinence diapers
â?¢ Medical and Surgical:
â?¢ Gowns,
â?¢ Face masks,
â?¢ Caps,
â?¢ Drapes, etc
â?¢ Other Miscellaneous Applications:
â?¢ Filtration Material,
â?¢ Agriculture,
â?¢ Oilsorbents
â?¢ Hot-melt adhesives
â?¢ Headliners, etc
Next generation skylights that use high-quality materials for superior light harvesting.
The prismatic skylights lets more uniform lighting to the inner dome, allows 100% more lighting disusion, making it more durable and resistant to hail.
ADVANTAGES
Excellent Diffusion, Natural Lighting and thermal insulation for industrial buildings.
4' x 8' size.
Hermetic system.
Installation on Roof Curb compatible with cover sheet and steel fall arrest mesh.
Uniform lighting throughout the ship.
Double layer of prismatic acrylic outside + new generation acrylic diffuser inside.
Hail resistant.
10 year warranty on materials.
Cover percentage required: 3%.
Certifications: Air, Water, Structural (AAMA/WDMA/ CSA 101 / I.S.2 / A440).
The continuous gravity fan ofers ventilation at no cost per operation and with minimal maintenance along the ridge of industrial warehouseâ??.
Its structure makes it resistant to wind force and its design provides ventilation and airtightness.
DESIGN
â?¢ Structural frames @ 2.4m.
â?¢ It is manufactured in throats of 24 â??, 36â??, 42 â??, 48â??, 60 â??, 72â??, 144 â??or larger.
â?¢ Easels with gutters.
â?¢ Interior baes.
â?¢ Flashing according to type of cover.
â?¢ Start and end diverters.
â?¢ Galvanized protective mesh for birds.
â?¢ Made of galvanized steel, galvalum, pintro or kynar.
TECHNICAL INFORMATION
Excellent Diffusion, Natural Lighting and thermal insulation for industrial buildings.
4' x 8' size.
Hermetic system.
Installation on Roof Curb compatible with cover sheet and steel fall arrest mesh.
Uniform lighting throughout the ship.
Double layer of prismatic acrylic outside + new generation acrylic diffuser inside.
Hail resistant.
10 year warranty on materials.
Cover percentage required: 3%.
Certifications: Air, Water, Structural (AAMA/WDMA/ CSA 101 / I.S.2 / A440).
Width: 152cm
Weight: 42.5gsm
Color: black, white, grey and others
Certification: iso9001, sgs
Composition: 100% polyester
Place of original: zhejiang, china
Coated: pa and pes coated
Usage: garment
Type: plain or twill weave
Handfeel: soft, medium and stiff
Polyethylene Low Melting Bag,single sheet thickness is 10-300 mic, melting point is 70-115?, various colors, printing, double seal thermal bonding insurance line are available.
