Model Number:417,517,617 ,437,537,637,117,217
Type: rock bit cutter
Material:Tungsten Carbide
Use: Well Drilling
Formation:soft to hard formation
Usage:Produce /replace hole opener cutters
Bearing type: journal bearing
Sealed type:metal sealing /Rubber seal
Teeth type: insert button or milled tooth,saw tooth
Name:Tci rock bit cutter
Api 9 7/8 hj437g new tci tricone bits/tungsen carbide insert bit/rock bits/tricone rotary drill bit for well drilling
I-product specification:
Bearing type: sealed journal
Sealed type: mental sealed bearing
Hydraulic design: 3 nozzles with snap rings
Pin connection: 6 5/8” api regular
Approx. Weight: 60 kgs
Condition: 100% new with original packing and documents
Moq: 1 piece, we have enough stock for normal sizes
Brand name: kingdream
Packing: wooden case for export
We have enough stock, we can ship to you by sea or air within 3 days
1.Tighten the bits when screw on.
2.When the bit lower down to the bottom ,
Should give a soft pressure, slow drilling .After a drilling 0.2m-0.3m with appropriate pump, then give the conventional drilling.
3.Drilling could not be without water, if not fear the normal vibration sound or drill too slow, lift the drill to check without delay.
4.When drill jammed, withdraw first, should not to force the rig start.
5.Drill could not without water, to ensure that the bit will be too hot.
6.Use the bits in right order , big size first, then small one .
9 be used for water well, oil field, underground, construction, geothermal, directional boring
114-117, 127
Soft Formation Tooth Bits
The 114-117 bits are used to drill low-compressive strength, soft formation. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. On the softest bits type this hard facing completely covers the bit teeth.
127
Medium-Hard Formation Tooth Bits
The 127 bits are used to drill high-compressive strength, medium hard formations. Short projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear.
437
Soft Formation TCI Tricone Bits
The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, result in high bit penetratione rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations.
517
Medium Formation TCI Tricone Bits
The 517 features aggressive chisel tungsten carbide insert on the heel rows and inter rows. This design provides a fast drilling rate and added cutting strcture durability in medium-to-medium hard for-mationes. The HSN rubber O-ring provides adequate sealing for bearing durability.
637
Hard Formation TCI Tricone Bits
The 637 bits can be used to drill hard and abrasive forma-tions. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-durability and long life.
617
Medium-Hard Formation TCI Tricone Bits
The 617 feature robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fest drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-rin provides adequate sealing for bearing durability.
1009 Tci Tricone Rock Bit Cutter Suppliers
Short on time? Let Tci Tricone Rock Bit Cutter sellers contact you.
9 be used for water well, oil field, underground, construction, geothermal, directional boring
114-117, 127
Soft Formation Tooth Bits
The 114-117 bits are used to drill low-compressive strength, soft formation. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. On the softest bits type this hard facing completely covers the bit teeth.
127
Medium-Hard Formation Tooth Bits
The 127 bits are used to drill high-compressive strength, medium hard formations. Short projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear.
437
Soft Formation TCI Tricone Bits
The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, result in high bit penetratione rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations.
517
Medium Formation TCI Tricone Bits
The 517 features aggressive chisel tungsten carbide insert on the heel rows and inter rows. This design provides a fast drilling rate and added cutting strcture durability in medium-to-medium hard for-mationes. The HSN rubber O-ring provides adequate sealing for bearing durability.
637
Hard Formation TCI Tricone Bits
The 637 bits can be used to drill hard and abrasive forma-tions. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-durability and long life.
617
Medium-Hard Formation TCI Tricone Bits
The 617 feature robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fest drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-rin provides adequate sealing for bearing durability.
This Handmade Boho Clutch Bag is ethically made with love. This Indian boho bag comes with intricate bead work, coin work and is the perfect festival bag. With its elegant and understated simplicity, this bohemian purse is made with eco friendly jute fabric and would be a great companion on music festivals, rock concerts, or any adventure around the world. Carry a bit of boho with you wherever you go.
Decorated by hand, this boho clutch purse design features intricate embroidery and delicate beading with a trim of tassels. This bohemian bag for women features a magnet fastening and secure zip making it both fashionable and functional.
Brief introduction
Size
12 1/4'' (311.1mm)
Iadc
517
Bearing type
Sealed bearing
Thread connection
6 5/8 reg pin
Wob(kn/mm)
0.35~1.05
Rpm(r/min)
120~50
Make up toqure(kn.M)
46.1~54.2
Weight(kgs/pc)
278
Color
Customized
Packing
Plywood box(free-fumigation)
Industrial standard
Sy/t5164
Moq
1 pc
Payment terms
T/t, western union, and l/c are acceptable
Applications
Soft with low compressive strength and high drillability, such as shale, clay, sandstone and soft limestone, etc.
Note:other size and iadc is avaiable
The 437 tci bits are used to drill low compressive strength very soft formation tci bits maximize
the use of both conical and chisel tungsten carbide inserts of large diameters and high projection.
This cutting structure design combined with maximum cone offset ,results in high bit penetration
rates.the deep intermesh of cutter rows prevents bit bailing in sticky formations.
TCI 517 medium formation TCI Tricone bits
The 517 features aggressive chisel tungsten carbide inserts on the heel rows and inner rows this
design provides a fast drilling rate and added cutting structure durability in medium to medium
hard formations the HSN rubber o-ring provides adequate sealing for bearing durability.
TCI 617
TCI tricone bits 617 features robust chisel tungsten carbide inserts on the heel row and conical
on the inner rows .this design provides a fast drilling rate and added cutting structure durability in
medium to medium hard formations . the HSN rubber o-rin provides adequate sealing for bearing durability .
TCI 637 can be used to drill hard and abrasive formations
wear –resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge.
maximum numbers of hemispherical-shaped inserts are used in all rows to provide cutter durability and long life.
Tricone Bit, Steel Tooth Bit, TCI tricone Bit, Single Cone Bit, Rock drill Bits,Rotary Bits.
Application Petroleum & Gas ,Water well ,Mining and Tectonic Industries ,Oil field,
Construction, Geothermal, Directional Boring, and Underground Foundation work.
1) Condition: 100% new
2) Manufacturer brand name: GREAT
3) The bit size: 2 7/8" - 36"
4) IADC code: 111,115,117,127,137,217,417,517,537,617,637 etc.
5) Seal type: Rubber Sealed Bearing ,Metal Sealed Bearing.
6) Bearing type: Sealed Journal bearing ,Roller Bearing ,Air Bearing.
7) Nozzle quantity and nozzle size: 3 nozzles.
8) Connection joint Pin size: API 2-3/8"-7 5/8" Reg.
1.Brief introduction
We are a professional company in supplying tricone bits, steel teeth bits, single cone bits, and pdc bits.
Bits sizes range from 3 1/2" to 26".And cover almost all iadc codes.It can be used in various of different fields, mining, hydrology, subterranean heatpilling, water well drilling and oil well drilling.
This type of bits have optimal bearing design, it can be working stably in high wob, and the qualtiy
Tungsten carbide inserts on cone and the gauge make a good wear resistance largely extend the
Working life of bits.It is suitable for medium to hard formation.
2.Advantage
1.High-strength, high flexibility, high temperature, high wear resistance.
2. High-precision metal seal.
3. Locking roller ball, to adapt to high-speed.
4. The use of high strength high toughness carbide teeth,
5. Hours in the rotary cone bit with the impact, crushing and shearing the role of broken rock.
6. Cone bit to adapt to the soft, medium and hard of various strata.
7. Reasonable price and long working life.
1.Tighten the bits when screw on.
2.When the bit lower down to the bottom ,
Should give a soft pressure, slow drilling .After a drilling 0.2m-0.3m with appropriate pump, then give the conventional drilling.
3.Drilling could not be without water, if not fear the normal vibration sound or drill too slow, lift the drill to check without delay.
4.When drill jammed, withdraw first, should not to force the rig start.
5.Drill could not without water, to ensure that the bit will be too hot.
6.Use the bits in right order , big size first, then small one .
1.Size:3 3/4" (95.3mm)~26" (660.4mm)
2.Cover all all iadc code
3.Reliable quality and best price
4.Tungsten carbide insert tricone bit
5.Certified by iso, api
Advantages
1.High-strength, high flexibility, high temperature, high wear resistance.
2. High-precision metal seal.
3. Locking roller ball, to adapt to high-speed.
4. The use of high strength high toughness carbide teeth,
5. Hours in the rotary cone bit with the impact, crushing and shearing the role of broken rock.
6. Cone bit to adapt to the soft, medium and hard of various strata.
More advantages
1.Suitable for medium to medium hard formation of high crushing resistance (hard shale, sands, etc.)
2.Bit bearing is non-sealed roller bearing.
3.Hardfacing is applied on the shirttail, and carbide inserts for gage protection are pressed into the head od.
4.Cone gage surface is reinforce with carbide compacts.
12 1/4" TCI bit
Size: 12 1/4" IADC code:517
Sealed Type: Rubber sealed Thread:6 5/8"reg pin
WOB(KN/mm):0.7~1.20 RPM(r/min):70~40
Make up toqure(KN.M):16.300~21.700 Weight(kgs/pc):105
Color:Blue, red, green or Customized Packing:Plywood box(free-fumigation)
Industrial standard:SY/T5164 MOQ:1 PC
Payment terms: T/T,Western Union,and L/C are acceptable
Applications:Soft with low compressive strength and high drillability, such as shale, clay, sandstone and soft limestone, etc.
Note:other size and IADC is available
Roller-Ball-Roller-Thrust button/Sealed Bearing,Weight on bit: 5880-11770N/cm;Rotary speed:50-80RPM,Spherical inserts on gage and inner rows. Designed for effective drilling in hard and abrasive formations with high compressive strength such as granite,basalt,hematite,magnetite,etc.Application:46000-56000Psi
1.Cutting structure this type TCI tricone bits:
The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit.
2.Gauge structure this type TCI tricone bits:
Multiple gauge protection with gauge trimmers on the heel of cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.
3.Bearing structure of this type TCI tricone bits:
High precision bearing with two thrust faces. Ball lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved.
4.Seal and Lubrication of this type TCI tricone bits:
Premium Oring, optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability .
5.Product Application this type TCI tricone bits:
It can receive high WOB in the conventional drilling. It is suitable for various formations by matching cutting structure with different tooth shape, tooth density and tooth exposure height.
6.Advantage:
1. High-strength, high flexibility, high temperature and high wear resistance.
2. High-precision metal seal.
3. Locking roller ball, to adapt to high-speed.
4. The use of high strength high toughness carbide teeth,
5. Hours in the rotary cone bit with the impact, crushing and shearing the role of broken rock.
6. Cone bit to adapt to the soft, medium and hard of various strata.
7. Reasonable price and long working life.
API-7-1 Standard rock bit tricone bit TCI Tricone Bits inserted tooth
1.Cutting structure this type TCI tricone bits:
The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit.
2.Gauge structure this type TCI tricone bits:
Multiple gauge protection with gauge trimmers on the heel of cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.
3.Bearing structure of this type TCI tricone bits:
High precision bearing with two thrust faces. Ball lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved.
4.Seal and Lubrication of this type TCI tricone bits:
Premium O-ring, optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability .
5.Product Application this type TCI tricone bits:
It can receive high WOB in the conventional drilling. It is suitable for various formations by matching cutting structure with different tooth shape, tooth density and tooth exposure height.
1.Size:3 3/4" (95.3mm)~26" (660.4mm)
2.Cover all all iadc code
3.Reliable quality and best price
4.Tungsten carbide insert tricone bit
5.Certified by iso, api
Advantages
1.High-strength, high flexibility, high temperature, high wear resistance.
2. High-precision metal seal.
3. Locking roller ball, to adapt to high-speed.
4. The use of high strength high toughness carbide teeth,
5. Hours in the rotary cone bit with the impact, crushing and shearing the role of broken rock.
6. Cone bit to adapt to the soft, medium and hard of various strata.
7. Reasonable price and long working life.
More advantages
1.Suitable for medium to medium hard formation of high crushing resistance (hard shale, sands, etc.)
2.Bit bearing is non-sealed roller bearing.
3.Hardfacing is applied on the shirttail, and carbide inserts for gage protection are pressed into the head od.
4.Cone gage surface is reinforce with carbide compacts.
5. Partial top spoon shaped inner row of teeth, the wedge outer row of teeth is not equidistant teeth, in the back cone tooth and the outer row of teeth between adds a row of trimming gear
6. High compressive strength, hard and abrasive high formation, such as limestone, dolomite, sandstone, chert and other
The Bit Breakers are suitable to make up or break out the drilling bit during the oil well drilling and repairing operations. The Users should be chosen the bit breaker according to the size and model of the drilling bit.
Feature:Improve support and retention
Advantage:Manage the magnitude cutter loading and bit torque
Benefit:Improved bit durability and directional responsiveness
Advantage:Higher nozzle counts and/or fixed ports to best serve cleaning,cooling and cuttings evacuation requirements with available hydraulic flows.Allow for higher flow rates with minimal increase in pump pressure.
2. Detailed introduction to Bit breaker
1) Bit breaker is mainly used to screw on or off a rock bit to the bottom of drill string.
2) It can also prevent the rock bit from dropping into well hole.
3) The price of it is cheap and the use of it is safety and reliable.
4) It is easy to operate. First, the bit breaker is placed on well hole and then put the rock bit onto it. Turn it to screw on or off the bit by turnplate.
The durability of premiun Tungsten carbide inserts is improved with new formulas and new techniques
2.Gauge Structure
Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inders and hardfacing on the shirttail increases gauge holding capacity and bearing life.
3.Bearing Structure
High Precision jourmal bearing with two thrust faces. Balls lock the cone. hardfaced head bearing surface. cone bearing inlaid with friction-reduceing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved,and suitable for high rotary speed.
4.Seal and Lubracation
Advance metal face seal lowers seal frictional force and overall seal torque and improves seal life. the pressure compensator syste, and advanced grease can greatly increas the lubracating relaibility.
5.Six-Point Position stabilzation Structure
The bit leg is designed with specific interated stability structure, which provides near six-point contact with borehole wall for the bie. this new feature gives the bit unequaled stability which greatly reduces bit vibration protects the cutting structure from damageding blows and keeps good borehole quality, the thickened nozzle wall can protecy hydraulic system from wear and fluid erosion.
6. Product Application
It is suitable for downhole motor and high speed applications, and is the ideal selection for drilling directional and horizontal wells.
1009 Tci Tricone Rock Bit Cutter Suppliers
Short on time? Let Tci Tricone Rock Bit Cutter sellers contact you.
