Submerged pump [1] is a positive pressure conveying vertical pump, which can effectively solve the problem of air resistance and cavitation. The explosion-proof level of the conveyed material determines the submerged pump products with different structure, working principle, classification, scope of application, product advantages and disadvantages and mode of operation, which can be simply divided into two categories of traditional submerged pumps (explosion-proof outside the tank 1 area, 0 area inside the tank is not explosion-proof) and new type of submerged pumps (explosion-proof outside the tank 1 area, explosion-proof inside the tank 0 area).
Submerged pumps are vertical pumps in which the impeller, pump body, and other flow-through parts are submerged in the material being conveyed, and are connected to the motor by a shaft. Submerged pumps are made according to the different needs of reaching into the length of the container. Submerged pump and material contact parts, generally according to the requirements of the material selection, metal and non-metallic materials. Such as 304, 316, 316L, engineering plastics, fluorine plastic and so on.
We manufactured vertical pumps for the applications with low net positive suction head, cryogenic temperatures where vertical lift is required and in also in sump and cooling water services.
Our vertical pumps is specially designed for service in water, chemicals, sewage and slurries. Vertical pumps are cover a wide range of hydraulic condition to meet virtually every pumping service in the industry and optimum efficiency.
YRY series submerged pump is a single-stage single suction vertical high temperature submerged centrifugal pump. This series of pump, design professional, with excellent heat resistance, long life, high efficiency, good sealing performance, low niose, small footprint, high cooling efficiency, reasonable structure and so on. This pump is dedicated to pumping less than 500 high temperature molten salt and heal conducting oil. This pump is widely used in the technological process of phthalic anhydride, maleic anhydride, acrylic acid, acrolein, fumaric acid, melamine, refrigerants, aluminum magnesium industry, PMDA industry etc. It can also be used for transmission of heating medium in rubber, plastic, building materials and other insustries. In addition, it can be used to pumping more than 100 hot water and other heat medium. This series of pump, adopting different structures and materials according to different media. Especially for those with larger liquid depth, we have patented structure design, and that can completely replace imported products.
Frame Plate Liner Insert SP15041A05 is the main part of 150SV-SP Vertical Slurry Pump wet side. It works with the volute lining. The frame plate liner inserts and impellers are used to transport mud. And the frame plate has a replaceable wear-resistant metal lining plate or rubber lining plate.
are a professional slurry pump parts manufacturer, Slurry Pump spare parts are a maintenance requirement when operating slurry pumps, and can t be ignored. offer suitable replace spare parts for original slurry pump, including heavy duty slurry pumps AH (R), M (R), high head slurry pump HH, light duty slurry pump L (R), gravel pumps, vertical sump slurry pump, and froth pump. Tobee have different materials, such as high chrome pump parts, dual-phase steel slurry pump parts, slurry rubber pump spares, polyurethane pump spare parts, slurry pump ceramic sapres, etc.
Heavy duty submerged slurry pumps are vertical, shaft driven centrifugal slurry pumps designed for transferring abrasive and high density slurries from sumps, pits and other submersible source. The position of the shaft of the vertical slurry pump is perpendicular to the horizontal plane, the pump end is under the water and the motor above the liquid level.
Features
-The rotor parts can be adjusted axially and supported by multiple points, so heavy duty cantilever sump pump can operate steadily and reliably.
-The pump adopts a long shaft structure and can be inserted up to 10 meters deep. Shaft coupling is safe and reliable. Convenient disassembly.
-The impeller is immersed in the medium when the pump starts, so it is easy to start, and there is no air exhaust problem.
-The outlet flange is a half movable flange for easy connection.
Series SP(R) slurry pump is centrifugal vertical sump pump, work under fluid. It widely
used for delivery abrasive, high density slurry with large particle in the metallurgy, mine, power plant, chemical, and other industry.
Shijiazhuang Jiemu Machinery Equipment Co.,Ltd is one of the leading private indenting firms of China having 15 years of experience in Mining, Fluid Transportation and Fire Emergency Field. It works on design theory of slurry pump and water pump, experimental researches of pump performance wear mechanism and new products developing, and involves in research, design, manufacturing and sales.
32178 Submerged Pump Suppliers
Short on time? Let Submerged Pump sellers contact you.
TPR100RV series Vertical Centrifugal Sump Pump with rubber impeller is 100% same and interchangeable with 100RV-SPR rubber lining vertical slurry pump.
TPR100RV Vertical Sump Pump for Mining and Aggregate Slurries, it is also is designed to handle diverse uses including all rugged mining and industrial applications, always ensuring reliable performance and excellent wear endurance. 100RV vertical sump slurry pumps are mainly used in a variety of sump conditions, It can also be readily applied on floating dewatering or other floating pump platforms. Hard metal lined or fully rubber lined fitted.High capacity double suction semi-open impeller design, and suction agitator is also available.
Quick Information
Brand Name: HC Place of Origin: China Model Number : 100RV-SPR-HC
Fuel : Diesel Pressure : High Pressure
Standard or Nonstandard : Standard Structure : Single-stage Pump
Theory : Centrifugal Pump Usage : Water
Description
SP(R) Submerged Pump Accessories Pump Body
ySPR10092
150SV-SPR-HCPump BodySPR15092
Place of Origin: Hebei, China (Mainl and)
Standard or Nonstandard: Standard
Pressure: High Pressure
Applications:Mining,Coal,Metallurgy,Power plant.
Specifications
1.Excellent wear life
2.Competitive price
Our service
1. Quick Reply
Your inquiry related to our products or prices will be replied within 12 hours.
2.We have a group of high quality technicians with rich experience who can solve everything during the whole process.
3.The quality will be inspected strictly before delivery.
4.Perfect after -sales .We will be responsible for the whole life period
5.OEM order.
Price
Delivery Port : Tianjin
Packaging & Delivery
Packing :Wooden case
Delivery Lead Time : Within 15 days
Supply Ability : 300000 Pieces per Year
Tobee WNQ Submerged Dredge Pumps are also known as onboard dredge pumps, It can either be installed onboard of the dredging vessels or in the suction pipe or cutter ladder as submerged pump. Onboard dredge pumps are the primary power source for transporting the mixture to the hopper or discharge location. The dredge pumps are also essential for mixture transport in stationary dredgers and at pipeline booster stations. The WNQ series dredge pumps are single-walled conventional and high performance types, complete with drive, support and control systems. They can respond to a wide range of operational requirements. Each offers benefits according to dredging materials, circumstances, and weight and space limitations.
Design Features:
Heavy Duty - a double-walled pump construction fully equipped with interchangeable wear parts. Excellent configuration for the most demanding operations.
Performance - a single-walled construction furnished with, where possible, replaceable wear parts. An all purpose dredge pump and balanced option as regards weight, size and replaceable wear parts.
Easy - for operations that are less demanding. This is a single-walled construction without any replaceable wear parts - a pump construction with as few components as possible.
Product Parameter:
Character ModelZL38-11
Working Voltage RangeDC: 6V-24V
Rating Power6V: 2-12W/12V: 3-18W/24V: 5-25W
Static Water Head1-7 M
Static Flow Rate4-10 L/min
LifespanContinuous operation under normal surrounding >20000Hr
Working EnvironmentLiquid: From weak acid to weak base, workable in water (Submerged)
Max NoiseUnder normal working status, 1M distance over test instrument
Tobee 40mm vertical submerged chemical pump works underwater for delivering heavy concentration abrasive & corrosive slurry with big particles. pump column is made by steel or elastomer covered steel, For rubber lined pump, all wetted parts are made by elastomer for delivering strong corrosion slurry.
Tobee 40mm vertical submerged chemical pump specification:
Size: 40mm
Capacity: 7.2-29m3/h
Head: 4-28.5m
Speed: 1000-2200rpm
Eff.: 40%
Power: Max.15kw
Handling solids: 12mm
Materials: High chrome alloy, Rubber, Polyurethane,Ceramic etc
65 QV-SP Vertical Slurry Sewage Pump is a cantilever sump pump,Which work submerged to transport high abrasive and high density slurries with large particles.It doesn't need any seal water. Hard metal lined or fully rubber lined fitted.High capacity double suction semi-open impeller design.and suction agitator is also available.
Technical Parameter
Character ModelZL32-02
Working Voltage RangeDC: 6V-24V
Rating Power6V: 2-6W / 12V: 3-6W / 24V: 4-7W
Static Water Head1.0-2.5 M
Static Flow Rate2.0-3.5 L/min
LifespanContinuous operation under normal surrounding >20000Hr
Working EnvironmentLiquid: From weak acid to weak base?work in water (Submerged)
Max NoiseUnder normal working status, 1M distance over test instrument
Tobee 100mm vertical submerged chemical pump is mainly used in a variety of sump conditions, It can also be readily applied on floating dewatering or other floating pump platforms. As a true cantilevered vertical slurry pump, TP100RV vertical spindle pump does not have submerged bearings or seals, thus, eliminating the primary failure mechanism for similarly fielded pump lines.
Tobee 100mm vertical submerged chemical pump Specification:
Size: 100mm
Capacity: 40-289m3/h
Head: 5-36m
Speed: 500-1200rpm
Eff.: 62%
Power: Max.75kw
Handling solids: 32mm
Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc
Tobee 300mm vertical submerged chemical pump is unique cantilevered design, The sump pumps doesnâ??t need any seal and seal water. The TP300TV pumps are preferred by many customers with special installation requirements and widely applied in sump. Its wear-resistant metal liner could handle abrasive slurries with rough particles and high concentration.
Tobee 300mm vertical submerged chemical pump Specification:
Size: 300mm
Capacity: 288-1267m3/h
Head: 6-33m
Speed: 350-700rpm
Eff.: 50%
Power: Max.200kw
Handling solids: 65mm
Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc
Tobee 65mm vertical submerged chemical pump is mainly used to transfer high- hardness, strong-corrosion and high-concentration liquids that contain suspended solid particles, The metal lined and elastomer rubber lined is interchageable for different duties, such as finished ores, refuse ores, ashes, cinders, cements, mud, mineral stones and etc.
Tobee 65mm vertical submerged chemical pump Specification:
Tobee 150mm vertical submerged chemical pump are designed for every other tank, pit or hole-in-the-ground slurry handling situation, TP150SV pumps are available in various standard lengths to suit common sump depths, for very deep sumps or where high shaft speeds limit the length of the pump, a suction extension pipe can be fitted to the bottom inlet to extend the depth of the pump by up to 2 metres.
Tobee 150mm vertical submerged chemical pump specification:
Size: 150mm
Capacity: 108-576m3/h
Head: 8.5-40m
Speed: 500-1000rpm
Eff.: 52%
Power: Max.110kw
Handling solids: 45mm
Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc
Tobee 250mm vertical submerged chemical pump is centrifugal sump slurry pumps submerged in sump to work.It is designed for delivering abrasive, large particle and high density slurries. The pumps have no need of any shaft seal and sealing water. it can also be operated normally for insufficient suction duties. The submerged depth can be customed as different sump.
Tobee 250mm vertical submerged chemical pump specification:
Size: 250mm
Capacity: 261-1089m3/h
Head: 7-33.5m
Speed: 400-750rpm
Eff.: 60%
Power: Max.200kw
Handling solids: 65mm
Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc
Tobee 200mm vertical submerged chemical pump are an ultra-heavy duty design for continuous operation, the bearing assembly design allows the pumps to operate in very tough conditions without damaging the bearing. Both high chrome alloy and elastomer wet end parts are suitable to the different applications, and the pumps use in many industries, various lengths and suction extensions are available to suit most sump depths.
Tobee 200mm vertical submerged chemical pump Design Features:
Less wear, less corrosion
Wetted components are available in a wide range of alloys and elastomers. Tobee selects the optimum combination of materials for maximum resistance to wear in virtually any industrial application, including those demanding both abrasion and corrosion resistance, and where larger particles or high density slurries are encountered.
Abrasion resistant Ultrachrome T05 alloy.
Abrasion/corrosion-resistant Hyperchrome T49 alloy.
Corrosion-resistant stainless steels.
Natural and synthetic elastomers.
No submerged bearing failures
The robust cantilever shaft avoids the need for lower submerged bearings which are often the source of premature bearing failure.
Heavy duty roller bearings, above mounting plate.
No submerged bearings.
Labyrinth/flinger bearing protection.
Rigid, large diameter shaft.
No shaft sealing problems
The vertical cantilever design requires no shaft seal.
No priming required.
The top and bottom inlet design is ideally suited for â??snoreâ?� conditions.
Less risk of blocking
The screened inlets and large impeller passages reduce the risk of blockages.
Zero ancillary water costs
The vertical cantilever design with no gland or submerged bearings avoids the need for expensive gland or bearing flushing water.
Tobee 200mm vertical submerged chemical pump On-site Applications:
Mining Sump drainage Coal prep Mineral processing
Mill sumps Tunnel Tailings Chemical slurries
Ash handing Paper and Pulp Waste sludge Coarse sand
Lime mud Phosphoric acid Sump Dredging Mill grinding
Alumina Industry Power Plant Potash Fertilizer Plant Other industries
Description
Product details
Hc-SP(R) Submerged Pump Accessories
Pump Type, Part Name Part Code
40PV-SPR-HC,impeller,SPR4206
65QV-SPR-HC,impeller,SPR65206A
100RV-SPR-HC,impeller,SPR10206A
150SV-SPR-HC,impeller,SPR15206A
Product Advantages:
1.High Efficiency Submerged Pump Accessories Impellers are natural rubber lined,providing superior erosive resistance in fine particle slurry application
s plus offer ease of impeller changeout, in order to reduce over all maintenance costs and maximize wear lif e.
2.The impeller has l
arge and open pa
ssages and can transfer the slurry effectively,providing good dynamic and static balance to achieve little vibration and low noise in operation.
3. The open type impeller exhibits higher efficiencies and is less prone to wear in the front liner region.
4. Higher productivity, increased profitability and ease maintenance
5. Provide the best quality products with reasonable price and good after-sales service.
Packaging & Delivery
Packaging Details:,Wooden case
Delivery Detail:,in 15 days after received your payment
Specifications
Place of Origin: Hebei, China (Mainland)
Structure: Single-stage Pump
Usage: mining,derding,water treatment and so on
Standard or Nonstandard: Standard
Fuel: Depen on customer
Pressure: High Pressure
Application: Centrifugal pump impeller
Color: depend on customer's requirements
Our service
1. Quick Reply
Your inquiry related to our products or prices will be replied within 12 hours.
2.We have a group of high quality technicians with rich experience who can solve everything during the whole process.
3.The quality will be inspected strictly before delivery.
4.Perfect after -sales .We will be responsible for the whole life period
5.OEM order.
Description
HC-SP(R) SUBMERGED PUMP ACCESSORIES
Rubber Lower Strainer for Centrifugal Pump
Specifications
Material: Natural Rubber
Superior Wear and Corrosive Resistance
With 3D drawing
Excellent Erosion Resistance
Adequate Inventory & Faster Delivery
Quality: Approved:ISO9001-2008
Product details
HC-SP(R) Submerged Pump
Accessories
Pump TypePart NamePart Code
40PV-SPR-HCLower StrainerSPR4116 L
65QV-SPR-HCLower StrainerSPR65116L
100RV-SPR-HCLower StrainerSPR10116L
150SV-SPR-HCLower StrainerSPR15116L
Place of Origin: Hebei, China (Mainland)
Pressure: High Pressure
Structure: Single-stage Pump
Usage: Water
Standard or Nonstandard: Standard
Fuel: Depend on customer
Pressure: High Pressure
Application: Submersible
Color: Black or depend on customer
[Product Advantages]
1. Combination of thick rubber and strong metal has perfected the heavy duty construction
2. Natural rubber is used for liner, possessing superior erosive resistance in fine particle slurry applications.
3. Provide the best quality products with reasonable price and good after-sales service
4.Widely used in mining, coal, metallurgy, chemical industry, power plants and other industries.
More details please contact me!
Our service
1. Quick Reply
Your inquiry related to our products or prices will be replied within 12 hours.
2.We have a group of high quality technicians with rich experience who can solve everything during the whole process.
3.The quality will be inspected strictly before delivery.
4.Perfect after -sales .We will be responsible for the whole life period
5.OEM order.
Packaging & Delivery
Packaging Details:depend on customer
Delivery Detail:in 20 days
Port:TIANJIN
Payment terms:L/C,T/T
32178 Submerged Pump Suppliers
Short on time? Let Submerged Pump sellers contact you.
