STXtek Flap barrier gate turnstiles are constructed to control people entering or exiting the restricted area. It is usually used in high pedestrian traffic flow locations in both directions.
Size: 1200*280*980 mm
Pass Speed: 35 people/min
Pass Width: 550 mm
Input Voltage: 110 240VAC, 50HZ
Working Voltage: DC24V
Material: 1.2 / 1.0 mm 304 Stainless steel
Aneiz F10 flap turnstile-Support OEM and ODM. Support third-party biometric devices, such as fingerprint scanner, face recognition camera. RFID card reader, QR code scanner.
Aneiz F10 flap turnstile is a high performance pedestrian control turnstile. Usually used in high pedestrian traffic flow in both directions to control pedestrian entry or exit in restricted areas
304 Stainless steel material, durable, high quality, for long lasting use.
The F10 features designed with standard relay signal, which can integrate easily to any kind of access control and fire systems through I/O (dry contact).
In case of emergency, when power goes off both directions are free.
Passing Direction: Single directional / Bi-directional.
FEATURES
Aneiz F10 flap turnstile -The panels of the flap turnstile extend from a pair of optical revolving door cabinets, forming a pedestrian barrier in the middle of the two cabinets. Flap turnstile is an aesthetically pleasing security and access control solution.
Aneiz F10 flap turnstile -The arms will automatically retract during power failure. Flap turnstile also can be triggered to permanently open during emergency to facilitate fast evacuation. This is complying with fire safety requirements.
Aneiz F10 flap turnstile -Altogether, there are 5 million cycles, 304 Stainless steel material and brushless DC motor, which guarantee greater durability and longer equipment life.
Aneiz F10 flap turnstile -The turnstile designed with consolidated and more durable mechanism, will not break even someone collide it, anti-collision and anti-kick function.
Aneiz F10 flap turnstile -The flaps will close automatically if there is no pedestrian passing or passenger delay to entry.
IR sensors detect unauthorized or abnormal access. Alarm buzzer function will be triggered when the user is passing thru without authorization, tail gaiting, illegal intrusion or incorrect direction.
Aneiz F10 flap turnstile -Multiple Operating Modes-optional
IC/ID card, key fob, QR/bar code, face / fingerprint / finger vein biometric recognition, push button, ESD, wireless remote control, insert coins / card / wristband, digit counter...
Aneiz F10 flap turnstile TECHINCAL SPECIFICATION
Material 304 Grade Stainless Steel
Cabinet Dimension 1200(L) X 300(W) X 980(H)mm
Arm Material Plexiglas-transparency
Passage Width 550mm standard lane
Throughput 40 to 45 people per minute
Response Time â?¤0.3S
Net Weight 65kg/pcs single core
85kg/pcs double core
Directional Mode Uni-directional or bio-directional
IR Sensor 3 pairs (standard)
Power Supply AC220V/110V, 50/60Hz
Power Voltage 24V DC
Power Consumption 40W
MCBF 5 million
Operating Temperature -20 �°C - 75 �°C
Operating Environment Indoor or outdoor (need with shelter)
Relative Humidity 95%
LED Indicators Red cross means gate open,
Green arrow means gate closed
Warranty 18 Months
Swing gate turnstile is mainly used for pedestrian entrance and exit management. The general application site only allows personnel to pass, including personnel tow the baggage, and the disabled person.
Size: 1200*185*980 mm
Pass Speed: �¢?�¤35 people/min
Pass Width: 600-900 mm
Input Voltage: 110240VAC, 50HZ
Working Voltage: DC24V
Material: 1.5 / 1.2 mm 304 Stainless steel
>100ms pulse signal, current>100ms
10Communication connectionRs485 communication module standard.
11MaterialSus304, thickness is no less than 1.5mm
12Running life5--8 million(continuous opening and closing operation)
13Protection gradeIp54
14ColourSsb(us32d)-stainless steel brushed / powder coating(optional), or other colour you like
15Operation placeSubway station, hoverport, tourism sports, exhibition, swimming hall, residence area, ntrance and exit attendance, gateway guard, charge management, special access control
Product Description
1.Fault detection and alarm functions, easy to use and maintenance
2. The running status can be programmed and controlled with the built-in keyboard on the main board
3. Mechanical antipinch function. If the gate meets resistance in the reset process, motors will stop working automatically within the prescribed time and reset again after the default delay (till fully reset)
4. Anti-breakthrough function. The gate is locked automatically until opening signal received
5. Synchronization functions (for dual gate equipments)
6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds),the system will cancel the authority of the current user automatically
7. Gate can be set as normally open or normally closed
8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access controller needed)
9. Direction can be set as single-direction or bi-direction
10. LED direction indicator
11. Gate auto opens when power off and auto close when power on, complying with fire safety
Requirements
12. Alarm function, in case of illegal intrusion and reverse intrusion, etc.
13. Counter function (optional)
14. Support infrared photocell for anti-pinch and reset function (optional)
Technical dataL228
Dimension800x280x960mm
Unlock time0.2s
Passage width¤550mm
Throughput rate35p/m
Power supply100~240v
Operational voltage24v
Max power consumption30w
Frequency50~60hz
Prectection level44ip
Working temperature-25~70 °c
Electro-magnetic driveDc
Net weight40kg
Input12v dry contact
We are turboo automation for turnstiles since 2006
We own 3 factories and 1 office and rd center in china
Hoping i can get the chance to serve you
Any comments, please don't hesitate to contact me
Thanks in advance!
Technical dataa221a
Dimension1410x300x1005mm
Unlock time0.2s
Passage widt550mm
Throughput rate35p/m
Power supply100~240v
Operational voltage24v
Max power consumption35w
Frequency50~60hz
Prectection level44ip
Working temperature-25~70 c
Electro-magnetic drivedc
Net weight80kg
Input12v dry contact
Technical dataa207
Dimension1400x300x1020mm
Unlock time0.2s
Passage width?¤600mm
Throughput rate35p/m
Power supply100~240v
Operational voltage24v
Max power consumption35w
Frequency50~60hz
Prectection level44ip
Working temperature-25~70 c
Electro-magnetic drivedc
Net weight90kg
Input12v dry contact
Technical dataa222a
Dimension1430x310x1005mm
Unlock time0.2s
Passage width¤550mm
Throughput rate35p/m
Power supply100~240v
Operational voltage24v
Max power consumption35w
Frequency50~60hz
Prectection level44ip
Working temperature-25~70 °c
Electro-magnetic drivedc
Material304 stainless steel
Input12v dry contact
We are turboo automation for turnstiles since 2006
We own 3 factories and 1 office and rd center in china
Hoping i can get the chance to serve you
Any comments, please don't hesitate to contact me
Technical datay248
Dimension1200x 280x980mm
Unlock time0.2s
Passage width 550mm
Throughput rate35p/m
Power supply100~240v
Operational voltage24v
Max power consumption35w
Frequency50~60hz
Prectection level44ip
Working temperature-25~70 c
Electro-magnetic drivedc
Net weight48kg
Input12v dry contact
We areturbooautomation for turnstiles since 2006
We own 3 factories and 1 office and rd center in china
Hoping i can get the chance to serve you
Any comments, please don't hesitate to contact me
Thanks in advance!
Technical datah249
Dimension1400x280x980mm
Unlock time0.2s
Passage width550mm
Throughput rate35p/m
Power supply100~240v
Operational voltage24v
Max power consumption35w
Frequency50~60hz
Prectection level44ip
Working temperature-25~70 c
Electro-magnetic drivedc
Net weight67kg
Input12v dry contact
Technical datah208
Dimension1400x280x980mm
Unlock time0.2s
Passage width550mm
Throughput rate35p/m
Power supply100~240v
Operational voltage24v
Max power consumption35w
Frequency50~60hz
Prectection level44ip
Working temperature-25~70 c
Electro-magnetic drivedc
Net weight66kg
Input12v dry contact
Technical dataa206
Dimension1400x280x1020mm
Unlock time0.2s
Passage width550mm
Throughput rate35p/m
Power supply100~240v
Operational voltage24v
Max power consumption35w
Frequency50~60hz
Prectection level44ip
Working temperature-25~70 c
Electro-magnetic drivedc
Net weight85kg
Input12v dry contact
ONE SET OF GOLF INCLUDE
Head of stick: 1 piece
Short handle: 1 piece
Long handle: 1 piece
Golf hole: 1 piece
Poin gate: 2 pieces
Barrier: 1 piece
Flag: 1 piece
Canvas bag: 1 piece
