Sodium naphthalene sulphonate fdn-
1 used for and widely for self-cured, vaporcured concrete and its formulations. At the early stage of
Application, extremely prominent effects are shown. As the result, the modulus and siteutilization
Can be drastically, the procedure of vapor cureis omitted in peak-heat summer days. Statistically
40-60 metric tons of coal willbe preserved when a metric ton of the material is consumed.
2 suitable for preparation of early-strength, high-strength, high-anti-filtration and selfsealing& pumpable concrete.
Product Description
High Range Water-Reducing Admixture
Sodium Naphthalene Sulphonate Formaldehyde, Poly Naphthalene Sulfonate Formaldehyde Condensate,Concrete Admixture
Uses
Sodium Naphthalene Sulphonate Formaldehyde produces concrete with extremely workable characteristics referred to as high slump. PNS also allows concrete to be produced with very low water/cement ratios at low or normal slumps.
Sodium Naphthalene Sulphonate Formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation
Product Description:
High Range Water-Reducing Admixture
Sodium Naphthalene Sulphonate Formaldehyde, Poly Naphthalene Sulfonate Formaldehyde Condensate,Concrete Admixture
Uses:
Sodium Naphthalene Sulphonate Formaldehyde produces concrete with extremely workable characteristics referred to as high slump. PNS also allows concrete to be produced with very low water/cement ratios at low or normal slumps.
Sodium Naphthalene Sulphonate Formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation
Addition Rates:
Sodium Naphthalene Sulphonate Formaldehyde can be added directly or added in after melt. It can be added during mixing and after-mixing. The afterward approach can achieve better result. The suggested addition rate is 0.75%.
Sodium Naphthalene Sulphonate Formaldehyde Direction
Prepare solutions as required.
Direct use of powdery agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: 60%).
The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds.
Sodium Naphthalene Sulphonate Formaldehyde Package, Storage & Handling.
For powder: Woven fabric bag with plastic liner. Net weight: 25kg +/- 0.1 kg.
Sodium Naphthalene Sulphonate Formaldehyde is widely applicable for cements builing,especially for the following: fluid cement, plasticized cement, steamed cement, water-tight cement, water-proof cement, prefabricated cement, prestressed reinforced cement and high strength cement. But the adaptability to different kind of cement is different.
Sodium lignosulphonate ( lignosulfonate ) water reducer are mainly for concrete mixture as water-reducing additive. Low dosage , low air content , water reducing rate is high , adapt to most kind of cement. Can confected as concrete early-age strength enhancer , concrete retarder , antifreeze , pumping aids etc. Nearly no precipitate product in the liquor additive which is made from the sodium lignosulphonate and naphthalin-group high-efficiency water reducer .The sodium lignosulphonate is fit for apply to building project, dam project, thruway project etc.
Product Description
High Range Water-Reducing Admixture
Sodium Naphthalene Sulphonate Formaldehyde, Poly Naphthalene Sulfonate Formaldehyde Condensate,Concrete Admixture
Uses
Sodium Naphthalene Sulphonate Formaldehyde produces concrete with extremely workable characteristics referred to as high slump. PNS also allows concrete to be produced with very low water/cement ratios at low or normal slumps.
Sodium Naphthalene Sulphonate Formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation
Addition Rates
Sodium Naphthalene Sulphonate Formaldehyde can be added directly or added in after melt. It can be added during mixing and after-mixing. The afterward approach can achieve better result. The suggested addition rate is 0.75%.
Sodium Naphthalene Sulphonate Formaldehyde Direction
Prepare solutions as required.
Direct use of powdery agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: 60%).
The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds.
Sodium Naphthalene Sulphonate Formaldehyde Package, Storage & Handling
For powder: Woven fabric bag with plastic liner. Net weight: 25kg +/- 0.1 kg.
Product Description
High Range Water-Reducing Admixture
Sodium Naphthalene Sulphonate Formaldehyde, Poly Naphthalene Sulfonate Formaldehyde Condensate,Concrete Admixture
Uses
Sodium Naphthalene Sulphonate Formaldehyde produces concrete with extremely workable characteristics referred to as high slump. PNS also allows concrete to be produced with very low water/cement ratios at low or normal slumps.
Sodium Naphthalene Sulphonate Formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation
Addition Rates
Sodium Naphthalene Sulphonate Formaldehyde can be added directly or added in after melt. It can be added during mixing and after-mixing. The afterward approach can achieve better result. The suggested addition rate is 0.75%.
Sodium Naphthalene Sulphonate Formaldehyde Direction
Prepare solutions as required.
Direct use of powdery agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: 60%).
The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds.
Sodium Naphthalene Sulphonate Formaldehyde Package, Storage & Handling
For powder: Woven fabric bag with plastic liner. Net weight: 25kg +/- 0.1 kg.
Sodium sulphonate formaldehyde,is chemically synthesized non-air-entraining superplasticizer.Widely used in roads, bridges, dams, ports and docks,tunnels,electricity,water conservancy and civil engineering projects,steaming nd natural preserving components.
1. When the strength and slump are basically the same,the amount of cement can be reduced by 10%-25%.
2. When the water-cement ratio is constant,the initial slump of concrete can be increased by more than 10cm,and the water reduction rate can reach 15%-25%.
3. It has significant early strength and enhancement effect on cockroaches,and its intensity increase range is 20%-60%.
4. It can improve the workability of concrete and improve the physical and mechanical properties of concrete.
5. It has good adaptability to various types of cement and good compatibility with other types of concrete admixtures.
6. Others:In the leather,textile and dye industries,it can also be used as a dispersant.
7. Especially suitable for:fluid concrete,plasticized concrete,steam curing concrete,impervious concrete,waterproof concrete,etc.
Sodium gluconate,also known as pentahydroxy sodium salts,is white or light yellow crystaline particles or powder,easily soluble in water,slightly soluble in alcohol,insoluble in ether.
1. In construction industry,sodium gluconate can be used as a water reducer and retarder.Adding a certain amount of sodium
gluconate to the cement can increase the plasticity and strength of the concrete,and has a retarding effect,that is,delaying the initial and final solidification time of the concrete.
2. In textile printing and dyeing industry,it is used as a high-performance chelating agent.
3. It is a kind of special cleaning agent for glass bottles.Glass bottles professional cleaning agent using sodium gluconate as the
main formula can improve the following common problems:detergency is not strong,easy to plug the nozzle and pipeline of the bottle washing machine.
4. It can be used as steel surface cleaning agent.
5. It is used as a stabilizer for water quality.Since sodium gluconate has excellent corrosion and scale inhibition effects,it is widely used as a stabilizer for water quality.
Sodium naphthalene sulphonate formaldehyde is widely applicable for cements builing, especially for the following: fluid cement, plasticized cement, steamed cement, water-tight cement, water-proof cement, prefabricated cement, prestressed reinforced cement and high strength cement. But the adaptability to different kind of cement is different.
Quality standard
Index items
Standard value
Test Results
Appearance
White crystal powder
Meets the requirement
purity
Y99%
99.2%
PH value
6.0;a8.0
6.70
Sulphate
¹0.05%
0.03%
chloride
¹0.04%
0.04%
lead,ug/g
¹2%
1.38%
loss on drying
¹0.5%
0.21%
Reducing substances
¹0.7%
0.38%
1, Packing: 25kg/bag or 1MT/big bag.
2 ,Storage: Kept in dry and ventilating place, prevent from rain and moisture when storage;
if agglomerated, please crush and make it into solution, and its effect will be the same.
3 ,Transportation:non-toxic, harmless, non-inflammable and non-explosive chemicals,
it can be transported in truck and train.
Calcium Lignosulphonate is a kind of natural anionic surface active agent processed with sulfurous acid pulping waste through advanced production technology. It can work well with other chemicals and produce early strength agent, slow setting agent, antifreeze and pumping agent . It is widely used in various concrete projects such preformed concrete, reinforced concrete and prestressed concrete, especially applicable for commercial concrete, anti-freezing concrete, waterproof concrete, bulk concrete, pumping concrete, with high economic benefit.
Major technical indicators :
Index name Index
Appearance yellow brown or brown powder
lignosulphonate 60%
Dry matter content 93%
PH(1% Aq. solution) 5-7
Moisture 7%
Water insoluble matter 2%
Inorganic salt 5%
Reducing Sugars content 3% .
Product Description :
Sodium lignosulphonate (lignosulfonate ) water reducer are mainly for concrete mixture as water-reducing additive. Low dosage, low air content, water reducing rate is high, adapt to most kind of cement. Can confected as concrete early-age strength enhancer, concrete retarder, antifreeze, pumping aids etc. Nearly no precipitate product in the liquor additive which is made from the sodium lignosulphonate and naphthalin-group high-efficiency water reducer .The sodium lignosulphonate is fit for apply to building project, dam project, thruway project etc.
Main performance:
1. Can be applied as common water reducing admixture and built material of series multifunction high-performance water reducing admixtures.
2. Can be adopted as the adhesives in the briquetting procedure in the vertical retort zinc smelters.
3. Can be used as embryo reinforcing agents in the fields of pottery and porcelain and refractory materials. They can increase the fluidity of the slurry and thus to improve the strength of the embryo.
4. In the field of water-coal paste, the sodium lignosulphonate series products can be adopted as the main compound materials.
5. In agriculture, the sodium lignosulphonate series products can be applied as the dispersant agents of pesticides and pelleting adhesives of fertilizers and feedstuffs.
1, Packing: 25kg in PP woven bag lined with plastic film.
2, Storage: Kept in dry and ventilating place, prevent from rain and moisture when storage; if agglomerated, please crush and make it into solution, and its effect will be the same.
3, Transportation:non-toxic, harmless, non-inflammable and non-explosive chemicals, it can be transported in truck and train.
20363 Sodium Naphthalene Sulphonate Formaldehyde A Suppliers
Short on time? Let Sodium Naphthalene Sulphonate Formaldehyde A sellers contact you.
