Concentrator lens sic based uv photodiode sensor sg01d-5lens
Avirtual = 11, 0 mm2
Properties of the sg01d–5lens uv photodiode
• broadband uva+uvb+uvc, ptb reported high chip stability, for flame detection
• radiation sensitive area a = 11, 0 mm2
• to5 hermetically sealed metal housing with concentrator lens, 1 isolated pin and 1 case pin
• 10µw/cm2 peak radiation results a current of approx. 350 na
About the material silicon carbide (sic)
Sic provides the unique property of extreme radiation hardness, near-perfect visible blindness, low dark current, high speed and low noise. These features make sic the best available material for visible blind semiconductor uv detectors. The sic detectors can be permanently operated at up to 170°c (338°f). The temperature coefficient of signal responsivity) is also low, < 0, 1%/k. Because of the low noise (dark current in the fa range), very low uv radiation intensities can be measured reliably. Please note that this device needs an appropriate amplifier (see typical circuit on page 3).
Options
Sic photodiodes are available with seven different active chip areas from 0, 06 mm2 up to 36 mm2. Standard versionis broadband uva-uvb-uvc. Four filtered versions lead to a tighter sensitivity range. All photodiodes have a hermetically sealed metal housing (to type), either a 5, 5 mm diameter to18 housing or a 9, 2 mm to5 housing. Further option is either a 2 pin header (1 isolated, 1 grounded) or a 3 pin header (2 isolated, 1 grounded).
SG01L-5LENS
Concentrator lens SiC based UV photodiode Avirtual = 55 mm2
Properties of the SG01L-5LENS UV Photodiode
* Broadband UVA+UVB+UVC, PTB reported high chip stability, for flame detection
* Radiation sensitive area A = 55 mm2
* TO5 hermetically sealed metal housing with concentrator lens, 1 isolated pin and 1 case pin
* 10µW/cm2 peak radiation results a current of approx. 700 nA
SG01L-5LENS UV Photodiod Specifications
* Typical Responsivity at Peak Wavelength: 0.130/AW
* Wavelength of max. Spectral Responsivity: 280nm
Responsivity Range: 221 - 358nm
* Sensitive Area (chip size = 0.20 mm2): 55mm2
* Dark Current (1V reverse bias): 3.5fA
* Capacitance: 250pF
* Short Circuit (10µW/cm2 at peak): 700nA
* Temperature Coefficient: < 0.1%/K
* Operating Temperature: -55 ~ +170'C
* Storage Temperature: -55 ~ +170'C
* Soldering Temperature (3s): 260'C
* Reverse Voltage: 20V
Sg01l-5lens
Concentrator lens sic based uv photodiode avirtual = 55 mm2
Properties of the sg01l-5lens uv photodiode
Broadband uva+uvb+uvc, ptb reported high chip stability, for flame detection
Radiation sensitive area a = 55 mm2
To5 hermetically sealed metal housing with concentrator lens, 1 isolated pin and 1 case pin
10âµw/cm2 peak radiation results a current of approx. 700 na
Sg01l-5lens uv photodiod specifications
Sensitive area: 55 mm2
Dark current: 3.5 fa
Capacitance: 250 pf
Responsivity range: 221 - 358 nm
Operating temperature: -55 ~ +170â°c
Storage temperature: -55 ~ +170â°c
Soldering temperature (3s): 260â°c
Reverse voltage: 20 v
Properties of the sg01d-a18 uv photodiode
* uva-only sensitivity, ptb reported high chip stability
* active area a = 0.50 mm2
* to18 hermetically sealed metal housing, 1 isolated pin and 1 case pin
* 10µw/cm2 peak radiation results a current of approx. 1.85 na
Spectral characteristic
Typical responsivity at peak wavelength: 0.037/aw
Wavelength of max. Spectral responsivity: 331nm
Responsivity range: 309 - 367nm
Active area: 0.50mm2
Dark current (1v reverse bias): 1.7fa
Capacitance: 125pf
Short circuit (10µw/cm2 at peak): 1.85na
Temperature coefficient: < 0.1%/k
Maximum rating
Operating temperature: -55 - +170'c
Storage temperature: -55 - +170'c
Soldering temperature (3s): 260'c
Reverse voltage: 20v
Sic uv photodiode sg01m-5lens
Concentrator lens sic based uv photodiode avirtual = 11.0 mm2
Properties of the sg01m-5lens sic uv photodiode
* broadband uva+uvb+uvc, ptb reported high chip stability, for very weak radiation
* radiation sensitive area a = 11.0 mm2
* to5 hermetically sealed metal housing with concentrator lens, 1 isolated pin and 1 case pin
* 10âµw/cm2 peak radiation results a current of approx. 140 na
Specifications
Typical responsivity at peak wavelength: 0.130/aw
Wavelength of max. Spectral responsivity: 280 nm
Responsivity range (s=0.1*smax): 221 - 358 nm
Sensitive area (chip size = 0.20 mm2): 11.0 mm2
Dark current (1v reverse bias): 0.7 fa
Capacitance: 50 pf
Short circuit (10uw/cm2 at peak): 140 na
Temperature coefficient: < 0.1 %/k
Operating temperature: -55 - +170 'c
Storage temperature: -55 - +170 'c
Soldering temperature (3s): 260 'c
Reverse voltage: 20 v
2583 Sic Based Uv Photodiode Sensor Sg01D 5Lens Suppliers
Short on time? Let Sic Based Uv Photodiode Sensor Sg01D 5Lens sellers contact you.
Properties of the SG01D-5LENS UV photodiode
Broadband UVA+UVB+UVC, PTB reported high chip stability, for very weak radiation
Radiation sensitive area A = 11.0 mm2
TO5 hermetically sealed metal housing with concentrator lens, 1 isolated pin and 1 case pin
10uW/cm2 peak radiation results a current of approx. 350 nA
Focus-6400 butyl tapes are waterproof and insulated tapes with strong adhesion
and adaptation to irregular surfaces. It exhibits excellent performance in
waterproof, sealing and anti-UV to antenna feeder and cable connection
box.
Main Specification
(Customized size is acceptable.) 2mm*40mm*20m * 8.5mm * 8mm * 10mm * 12mm
Main Color - Black
Technical Data
Product Series FOCUS-6400 Series
Application Communication Industry
Elongation 400%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Tensile Strength 175KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion and adaptation to irregular surface. Good compatibility with various cables. Wide application temperature range. Excellent performance in weather resistance, waterproof sealing and anti-aging. Applications
Provide waterproof and sealing protection to communication base station and antenna feeder.
Provide waterproof and sealing protection to cable connection box
Focus-6400 butyl tapes are waterproof and insulated tapes with strong adhesion
and adaptation to irregular surfaces. It exhibits excellent performance in
waterproof, sealing and anti-UV to antenna feeder and cable connection
box.
Main Specification
(Customized size is acceptable.)
2mm*40mm*20m * 8.5mm * 8mm * 10mm * 12mm
Main Color - Black
Technical Data
Product Series FOCUS-6400 Series
Application Communication Industry
Elongation - 400%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility Â40, no crack on surface within 24h
Tensile Strength 175KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion and adaptation to irregular surface.
Good compatibility with various cables.
Wide application temperature range.
Excellent performance in weather resistance, waterproof sealing and anti-aging.
pplications
Provide waterproof and sealing protection to communication base station and antenna feeder.
Provide waterproof and sealing protection to cable connection box
SG01M-B18
UVB-only SiC based UV photodiode A = 0.20 mm2
Properties of the SG01M-B18 UV Photodiode
* UVB-only sensitivity, PTB reported high chip stability
* Active Area A = 0.20 mm2
* TO18 hermetically sealed metal housing, 1 isolated pin and 1 case pin
* 10mW/cm2 peak radiation results a current of approx. 2500 nA
SG01M-B18 UV Photodiode Specifications
Typical Responsivity at Peak Wavelength: 0.125/AW
Wavelength of max. Spectral Responsivity: 280nm
Responsivity Range: 231 - 309nm
Active Area: 0.20mm2
Dark Current (1V reverse bias): 0.7fA
Capacitance: 50pF
Short Circuit (10mW/cm2 at peak) : 2500nA
Temperature Coefficient: < 0.1%/K
Operating Temperature: -55 ~ +170°C
Storage Temperature: -55 ~ +170°C
Soldering Temperature (3s): 260°C
Reverse Voltage: 20V
SG01M-B5
UVB-only SiC based UV photodiode A = 0.20 mm2
Properties of the SG01M-B5 UV Photodiode
* UVB-only sensitivity, PTB reported high chip stability
* Active Area A = 0.20 mm2
* TO5 hermetically sealed metal housing, 1 isolated pin and 1 case pin
* 10mW/cm2 peak radiation results a current of approx. 2500 nA
SG01M-B5 UV Photodiode Specifications
Typical Responsivity at Peak Wavelength: 0.125/AW
Wavelength of max. Spectral Responsivity: 280nm
Responsivity Range: 231 to 309nm
Active Area: 0.20mm2
Dark Current (1V reverse bias): 0.7fA
Capacitance: 50pF
Short Circuit (10mW/cm2 at peak): 2500nA
Temperature Coefficient: < 0.1%/K
Operating Temperature: -55 ~ +170'C
Storage Temperature: -55 ~ +170'C
Soldering Temperature (3s): 260'C
Reverse Voltage: 20V
Properties of the SG01M-5LENS UV photodiode
Broadband UVA+UVB+UVC, PTB reported high chip stability, for very weak radiation
Radiation sensitive area A = 11.0 mm2
TO5 hermetically sealed metal housing with concentrator lens, 1 isolated pin and 1 case pin
10uW/cm2 peak radiation results a current of approx. 140 nA
Ethylene glycol (IUPAC name: ethane-1,2-diol) is an organic compound with the formula (CH2OH)2. It is mainly used for two purposes, as a raw material in the manufacture of polyester fibers and for antifreeze formulations. It is an odorless, colorless, sweet-tasting, viscous liquid.
Ethylene glycol is a high-production-volume chemical; it breaks down in air in about 10 days and in water or soil in a few weeks.It enters the environment through the dispersal of ethylene glycol-containing products, especially at airports, where it is used in de-icing agents for runways and airplanes. While prolonged low doses of ethylene glycol show no toxicity, at near lethal doses(â?¥1000 mg/kg per day) ethylene glycol acts as a teratogen. "Based on a rather extensive database, it induces skeletal variations and malformations in rats and mice by all routes of exposure." This molecule has been observed in outer space.
Commodity
Ethylene Glycol
Production batch number
3703W7120620
Inspection date
20201218
Items
Unit
Result
Standard
A masterbatch is a concentrated mixture of pigments or additives that are used in the plastics industry to color or enhance the properties of plastic products. It is a cost-effective and efficient way to introduce colorants, UV stabilizers, flame retardants, and other additives into plastics during the manufacturing process. Masterbatches are typically in the form of small pellets or granules that can be easily mixed with the base plastic resin, resulting in a consistent and uniform color or modification throughout the final plastic product. They play a vital role in achieving desired visual and performance characteristics in a wide range of plastic applications, from packaging materials to automotive components and consumer goods.
Zinc oxide is a versatile inorganic compound widely recognized for its numerous industrial and consumer applications. It is primarily known for its use as a white pigment in paints, sunscreens, and cosmetics, owing to its excellent UV-blocking properties and opacity. In addition to its role in pigmentation and sun protection, zinc oxide is utilized in the rubber and ceramics industries as a reinforcing agent and in the manufacturing of various chemical products, including zinc-based chemicals and pharmaceuticals. Its versatility, non-toxic nature, and ability to offer both aesthetic and functional benefits make zinc oxide a valuable and widely used compound in diverse fields.
UVA-only SiC based UV photodiode A = 0.06 mm
Model Number: SG01SA18
1.Properties of the SG01SA18 UV photodiode
* UVA-only sensitivity, PTB reported high chip stability
* Active Area A = 0,06 mm2
* TO18 hermetically sealed metal housing, 1 isolated pin and 1 case pin
* 10mW/cm2 peak radiation results a current of approx. 222 nA
2.About the material Silicon Carbide (SiC)
SiC provides the unique property of extreme radiation hardness, near-perfect visible blindness, low dark current, high speed and low noise. These features make SiC the best available material for visible blind semiconductor UV de-tectors. The SiC detectors can be permanently operated at up to 170'C (338'F). The temperature coefficient of signal (responsivity) is also low, < 0.1%/K. Because of the low noise (dark current in the fA range), very low UV radiation intensities can be measured reliably
3.Options
SiC photodiodes are available with seven different active chip areas from 0.06 mm2 up to 36 mm2. Standard version is broadband UVA-UVB-UVC. Four filtered versions lead to a tighter sensitivity range. All photodiodes have a hermeti-cally sealed metal housing (TO type), either a 5.5 mm diameter TO18 housing or a 9.2 mm TO5 housing. Further op-tion is either a 2 pin header (1 isolated, 1 grounded) or a 3 pin header (2 isolated, 1 grounded).
Protects your skin from UV rays.
The large bottle of sun milk with a high protection factor for sensitive skin
To fight against the harmful effects of UV radiation and to protect the valuable genetic capital of the skin, Laboratoires Vichy have integrated in the Sun Milk a filter system that is photostable with a high UVA -UVB spectrum based on Mexoryl.
Skin is protected against sunburn and skin aging.
Enriched with soothing, strengthening and regenerating Vichy Thermal Spring Water.
Its texture is enriched with hyaluronic acid for easy application, without whitening or greasy skin.
The freshness of this Care provides a pleasant feeling every time it is applied.
The hypoallergenic formula is dermatologically tested on sensitive skin.
A formula without fragrances
. The 300 ml size is very suitable for families.
Indications:
For light-skinned men and women who are looking for high sun protection for body and face
SG01XL-5
Broadband SiC based UV photodiode A = 7,6 mm2
Properties of the SG01XL-5 UV Photodiode
* Broadband UVA+UVB+UVC, PTB reported high chip stability
* Active Area A = 7.6 mm2
* TO5 hermetically sealed metal housing, short cap, 1 isolated pin and 1 case pin
* 10µW/cm2 peak radiation results a current of approx. 99 nA
SG01XL-5 UV Photodiode Specifications
Typical Responsivity at Peak Wavelength: 0.130/AW
Wavelength of max. Spectral Responsivity: 280nm
Responsivity Range: 221 - 358nm
Active Area: 7.6mm2
Dark Current (1V reverse bias): 25.3fA
Capacitance: 1900pF
Short Circuit (10µW/cm2 at peak): 99nA
Temperature Coefficient: < 0.1%/K
Operating Temperature: -55 ~ +170°C
Storage Temperature: -55 ~ +170°C
Soldering Temperature (3s): 260°C
Reverse Voltage: 20V
SG01L-5
Broadband SiC based UV photodiode A = 1.0 mm2
Properties of the SG01L-5 UV Photodiode
* Broadband UVA+UVB+UVC, PTB reported high chip stability
* Active Area A = 1.0 mm2
* TO5 hermetically sealed metal housing, short cap, 1 isolated pin and 1 case pin
* 10µW/cm2 peak radiation results a current of approx. 13 nA
SG01L-5 UV Photodiode Specifications
Typical Responsivity at Peak Wavelength: 0.130/AW
Wavelength of max. Spectral Responsivity: 280nm
Responsivity Range: 221 - 358nm
Active Area: 1.0mm2
Dark Current (1V reverse bias): 3.3fA
Capacitance: 250pF
Short Circuit (10µW/cm2 at peak): 13nA
Temperature Coefficient: < 0.1%/K
Operating Temperature: -55 ~ +170'C
Storage Temperature: -55 ~ +170'C
Soldering Temperature (3s): 260'C
Reverse Voltage: 20V
SG01S-18S
Broadband SiC based UV photodiode A = 0.06 mm2
Properties of the SG01S-18S UV Photodiode
* Broadband UVA+UVB+UVC, PTB reported high chip stability
* Active Area A = 0.06 mm2
* TO18 hermetically sealed metal housing, short cap, 1 isolated pin and 1 case pin
*10mW/cm2 peak radiation results a current of approx. 780 nA
SG01S-18S UV Photodiode SpecIfication
Typical Responsivity at Peak Wavelength: 0.130/AW
Wavelength of max. Spectral Responsivity: 280nm
Responsivity Range: 221 - 358nm
Active Area: 0.06 mm2
Dark Current (1V reverse bias): 0.2fA
Capacitance: 15pF
Short Circuit (10mW/cm2 at peak): 780nA
Temperature Coefficient: < 0.1%/K
Operating Temperature: -55 ~ +170'C
Storage Temperature: -55 ~ +170'C
Soldering Temperature (3s): 260'C
Reverse Voltage: 20V
Properties of the TOCON_ABC1
Broadband SiC based UV photodetector in TO5 housing with concentrator lens cap
0 to 5 V voltage output
peak wavelength at 280 nm
max. radiation (saturation limit) at peak is 18 nW/cm2, minimum radiation (resolution limit) is 1.8 pW/cm2
Applications: very low UV radiation, flame detection
2583 Sic Based Uv Photodiode Sensor Sg01D 5Lens Suppliers
Short on time? Let Sic Based Uv Photodiode Sensor Sg01D 5Lens sellers contact you.
