Shaft Vibration Probe TM0180-A07-B00-C06-D50
Is YOYIK for the use of units of the power plant supporting professional models of products. YOYIK main generator accessories, generator sets of accessories. For decades, the company relies on advanced technology, technology, materials and scientific management to improve the stability and reliability of the pump, for hundreds of thermal power plants, hydropower stations, cement plants, coal gangue power plants, metallurgical companies, steel and other overhaul , Technical transformation to provide a reasonable and excellent equipment selection, construction planning, installation commissioning, after-sales service, such as perfect complete service, won the power industry industry wide acclaim.
#DF-Shaft Vibration Probe TM0180-A07-B00-C06-D50-DF
Signal converter system CON021/916-200
eddy current sensor are used to CWY-DO-810803
Sensor Unit 71107554
INTEGRATED VIBRATION SENSOR SZ6
motor differential protection relay WDZ-5231
electromechanical pressure switch 414871-QEK005
temperature sensor GPEAS7FS0650
Pro Switch HQA667386BD/99K
position sensor linear LVDT TDZ-1-H 0-100
thermocouple WREK2-330
Eddy current probe 111-402-000-013-1-1-050-000-010-5-000-10
Sensor DF311180-90-11-00
Key phase probe RS900804XL-003-060-05-01-00-03
Eddy Current Sensor PR6422/003-101
Sensor Position LVDT Spray HP bypass TDZ-1-03
Intermediate relay UEG/A-1H1D/110VAC
Probe 21747-080-0
Eddy Current Sensor PR6423/001-031
Air Pressure Regulator 67CFR-225/SB
speed sensor CS-3-M10-L110
Eddy Current Signal Converter CON031/916-120
Differential pressure transmitter CM-0.8
Temperature Controller P-300A
Online turbidity analyzer Monitor AMI Turbitrack CNA-25.411.200
magnetostrictive displacement transducer TDZ-1E-22
Pressure measuring line S100-AC-FH-0250(M16X2-G1/2)
speed sensor CS-1-UNF-060-02
Height and lifting capacity integrated display GDQ-4J
GT Local Control Cabinet MC-6100/2
equivalent thermal resistance DZ3.5.1-1995
Limit switch 0508.1169T0201
Bolt electric heating rod ZJ-20-27
speed sensor CS-1H-G-075-05-02
PPROACH SWITCH INDUCTIVE PROXIMITY SENSOR LJ12A3-4-Z/BY
Glass window components TC-SMW-16-5
NVM-12 detector CG2500
Shaft Vibration Probe TM0180-A07-B00-C06-D50
The Mercury Verado 250 is a high-performance outboard motor known for its power and reliability. Here are some key specifications:
Engine Type: 4.6L V8
Horsepower: 250 hp
Steering: Digital Throttle & Shift (DTS)
Starter: Electric
Shaft Length: Available in 25" (X-Long) and 30" (XX-Long)
Power Trim & Tilt: Yes
Fuel System: Electronic Fuel Injection (EFI)
Alternator: 115-amp
Weight: Approximately 600 lbs (272 kg)
Cooling System: Water-cooled with thermostat & pressure-controlled
The Verado 250 also features the Advanced MidSection (AMS) for reduced vibration and noise, and Adaptive Speed Control (ASC) for maintaining engine RPM despite changes in load or conditions12.
Power Plant supplies Sensor 2000TD Dongfang Yoyik Engineering Co., Ltd is a manufacturer and trader of industrial products. We mainly offer spare parts of turbines and generators. Kinds of pumps for EH system, valves, filters and filter elements, and other industrial tools and replacements. Our products and service are quality guaranteed.
YOYIK provides multiple types of spare parts and equipments for power plant :
Oil Tank Level Secondary Gauge CEL-3581F/G CREMER
LVDT Position Sensor TD-1-50
Pressure Switch PS531SPP10/BB32N3/S3M
Pressure Switch RC0410CH090H
Thermocouple WREK2-294
REGULATOR AIR PRESSUREP ROTECTIVE SHELTER AW30-2G
Shaft Vibration Probe TM0180-A07-B00-C04-D50
Gap Transmitter GJCF-15
Sensor DET-250B
Probe CWY-DO-815008
De-excitation Switch Opening Coil HSBA331433R0001
Probe CWY-DO-812509
LVDT HL-6-250-15
Position control switch AK-XC107\250VAC 5A
Pressure Switch RC861CZ084ZSSYM
Low Resistance Probe CS-1(D-100-05-01)
Pressure Switch HERIION 4â?¦40Mpa
Shaft Vibration Probe CWY-DO-20T08-M10*1-B-00-05-50K
Sensor 4Q15244
Braun Card D42151U1
Intelligent speed monitor WZ-3C-A
Limit Switch D4A-4510N
steam turbine bolt heater ZJ-22-7
Power Transformer DFFG-10KVA
Thermalcouple WRNK2-291, Φ5, L=10000 K
High Resistance Probe CS-1(G-100-02-01)
Signal Converter GJCF-6A
Pressure Switch WK09961
LVDT Position Sensor ZDET150B
LVDT Displacement Sensor DET150A DET150A
Sensor 2000TD
Probe CWY-DO-815005
LVDT Position Sensor TDZ-1-03
Hydrogen Flow Meter TMF-TA2-A1B0-330
Rotation Speed Probe ZS-01 L=90
Pressure Switch ST307-V2-55-B
Probe CWY-DO-811402
Pressure Switch HERION 5-25MPa
LVDT Position Sensor TDZ-1E-25
LVDT Sensor 6000TD
ASHCROFT Temperature Switch RANGE:65-125, SERAIL NO.D8004256, CAT No.LTDN4GG10A7030
Frequency Measurement Module DF-4K8772
Cable for probe CWY 5M
Rotation Speed Sensor ZS-03
Power for sensor GJCD-15
Sensor measures position of gap insert APH GJCT-15-E
Wheel Blade Opening Control LYK-11-1013
STICK BOLT HEATER ZJ-20-8B
LVDT Displacement Sensor DET100A
TEMPERATURE ELEMENT WRKK2-221
LVDT Position Sensor ZDET700B
LVDT Sensor 191.36.09.03 RANGE:±50.8mm
Probe 330103-00-05-02-00
TSI Double Relative Expansion Monitor DF2022
Servo Card DMSVC005
LVDT Position Sensor HTD-100-3
LVDT Position Sensor TDZ-1E-021 0-175
Air Preheater Heat Accumulator 26YR12-4-0
LVDT Position Sensor TDZ-1E-01
Camera IST-M938SRZ 900TVL
steam turbine bolt heater ZJ-19.5-380
Sensor 2000TD
[2020-3-4-DFMY]
Monoblock pumps -
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
salient features
- High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP
- Specially designed for wide voltage operation
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life
- Back pull-out design for easy servicing and repair
- Double shielded ball bearings, so no need of external lubrication
- All Model fitted to Mechanical seal.
specification
- Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 32 Mtr.
- Maximum Flow Rate : 940 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Method of Starting : Permanent Split Capacitor (PSC)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40,
50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm)
characteristics of clear cold water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : EN-8
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Plastic
Monoblock Pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
salient features
High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
- Mechanical seal is provided as per customers requirement
Specification
- Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 65 Mtr.
- Maximum Flow Rate : 1450 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80
100 X 80 and 100 X 100 (All size in mm)
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 mÃ?/sec (max.)
- Ph Value : 6.5 to 8.5
Material of construction - motor
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminium
Falcon regenerative monoset pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
Salient Features
High operating efficiency resulting in lower power consumption.
- Good suction lift characteristics.
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
- All Model fitted to Mechanical seal.
specification
Power Range : 0.37 Kw - 0.75 Kw (0.5 HP - 1.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
- Speed : 1440 RPM
- Maximum Total Head : 18 Mtr.
- Maximum Flow Rate : 4200 LPH
- Maximum Suction Lift : 8 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Single Phase, Clockwise from driving end
- Nominal Pumpset Size (Suction X Delivery) : 25mm X 25mm
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
material Of construction - Motor
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : SS-410
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : Brass
Cooling Fan : Plastic
Monoblock pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
Salient Features
High operating efficiency resulting in lower power consumption.
- Good suction lift characteristics.
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
specification
- Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 1440 RPM
- Maximum Total Head : 12 Mtr.
- Maximum Flow Rate : 3160 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase - Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150
(All size in mm)
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminum
Vertical compact structure, the inlet and outlet flanges are located on the same centre line, covering a small area and easy to install.
The assembled mechanical seal makes the installation and maintenance safer and more convenient, and ensures the reliability of the mechanical seal.
Wet parts are made of stainless steel, which will not contaminate the medium and have a long service life
, and the appearance is beautiful and generous.
The motor shaft is directly and precisely connected with the pump shaft through the coupling.
WFB series of seal-less self-control self-priming pump adopts no-leakage V-type seal assembly, eliminating the traditional pump packing seal, packing seal, mechanical seal, completely subdued the running, bubbling, dripping, leakingâ??, is to replace the original variety of long-shaft submerged pumps, submersible pumps, submersible pumps, etc. Ideal equipment. Disadvantages of the structure of the pump: First, downtime liquid leakage along the direction of the shaft outward, for frequent starting equipment is not very suitable for the occasion; Second, the power consumed by the secondary impeller is too large, the pump efficiency is low.WFB improved structure for the sealing device, one is to improve the efficiency of the pump, the second is to reduce the power of the motor, the third is to inhibit the leakage of the pump shutdown phenomenon. Sealing device in the movement process without friction, no wear and tear, the service life is more than 10 times longer than similar products. Transplantation of the vacuum pump principle, self-absorption performance is stable and reliable, in particular, the use of â??electric air control valveâ?? truly realised â??a diversion, life-long self-absorptionâ??. High efficiency, low vibration, low noise, flexible movement, easy disassembly, easy to install, no need for foot fixing, eliminating the difficulties of transporting, installing and maintaining the long-shaft submerged pump. With superior self-control function, it can be used with high-tech fields and highly automated series.
Shaft Vibration Gauge Cables TM0181-A40-B00
Deyang Dongfang Yoyik is a strong manufacture and trade company. We have a wide range of mechanical parts and components generator parts, electrical and electronic products processing, hydraulic machinery and components, hydroelectric generating units, coal-fired generating units, especially professional accessories for generator units. The goods are absolutely authentic, rest assured.
Yoyik can offer many spare parts for power plants as below:
#DF-Shaft Vibration Gauge Cables TM0181-A40-B00-DF
NEPM meter Hz
sight glass measurement 705-510A-110/7MR-A110-136
fan 4715MS-23T-B30
magnetic limit switch sensor TM0182-A50-B05-C00
Emergency governor speed probe 196.35.19.02
Gap measuring Probe (with cable and air
hose) GJCL-15
LVDT transmitter XCBSQ-04/400-02-01
sensor pressure switch 9AG-EF45-NI-FIA
Eddy Current Sensor PR6422/000-131
Eddy Current Sensor PR6424/101-000
Pressure Switch BH-040006-040
Pressure vacuum gauge (-0.1-0MPa)Diameter:150mm,Accuracy: 1.6/2.5 YZ-150
DG Single phase Dry Type Transformer WBWY/S1
Monitoring device for turbine speed impact sub HZQS-03A
Thermal Case Expansion TD-2-26
MAGNETIC SENSOR BRAND EPRO EMERSON PR6422/012-050
LVDT Sensor FRD.WJA2-301H
Magnetoresistive probe CS-1-D-065-01
thermocouple TKWRE2-230T
Temp sensor AS5181PD50Z2
Bolt electric heating rod ZJ-22-T(R)
SPEED TRANSMITTER JM-C-3ZS-100
sensor CWY-DO-811802-00-10-10-02
Sensor speed turbine ZS-01 L=80
Dual input series control power supply PSMC2-8-5-220V/240W
Low Resistance Probe G-065-02-01
speed sensor BRA5S05T90-5
Electronic Ballast CDZ-HID70
sensor speed 3 wire CS-2
Oil meter XOC-02
Hydroturbine Wheel Vane Feedback Sensor SWB-5
Speed digital display instrument JNJVS3900/13
Belt way sensor XD-TB-1-1230
thermal resistance WZPK2-235
LVDT Sensor TD-1GNK-100-15
Vacuum Low Voltage Switch CS-III
Shaft Vibration Gauge Cables TM0181-A40-B00
Description
Internal concrete vibrators use the eccentric principle. 18000rpm of the drive unit translates via the flexible shaft into frequency about 280 HZ in the poker head. It is more silence than pendulum type vibrator and also higher efficiency. It is used with electrical motor and has 4 standard poker diameters. The vibrator poker is top of the range poker head suitable for professional application.
EV serials vibrator poker 4~6m length, Bar diameter 28mm, 32mm, 38mm, 45mm
China manufacturer SHAFT VIBRATION PROBE PR6423/010-110 for power generation
Is for the use of turbine units of the power plant supporting professional models of products. main generator accessories, generator sets of accessories. For decades, the company relies on advanced technology, technology, materials and scientific management to improve the stability and reliability of the pump, for hundreds of thermal power plants, hydropower stations, cement plants, coal gangue power plants, metallurgical companies, steel and other overhaul , Technical transformation to provide a reasonable and excellent equipment selection, construction planning, installation commissioning, after-sales service, such as perfect complete service, won the power industry industry wide acclaim.
can offer many spare parts for power plants as below:
Electric motors (ac three phase). general purpose industrial motors, vibration motors, vertical hollow shaft motors, slip ring motors, boat motors, brake motors, custom design motors, electric motor spare parts.
Structure Size : 132 to 200
Rated Moment : Up to 400 Nm
Pole Number: 4 - 6
Protection Class : IP55
Rated Voltage : Up to 1000 V
Frequency -
Build Type : Flanged
Mechanical Structure : Cast iron body and ductile iron cover
Cooling Type -
Insulation Class : H
Working Regime : S2
Ambient temperature -
Motor Protection : Thermal protection with PTC
R&D support : KOSGEB / R&D and Innovation Support Program
Mass production support: Ankara Development Agency / Export Focused Development Program in Advanced Technologies with TR51 / 14 / aLTEK / 0070 project number
Structure Size : 225 - 355
Rated Power : 45 - 315 kW
Pole Number : 2 - 4
Protection Class : IP23
Voltage : 380 V (Contact us for different voltages.)
Frequency : 50 Hz (Contact us for different frequencies and speed control devices.)
Build Type : B3 (Contact us for different structure types.)
Mechanical Structure : Body and covers are cast iron, legs are ductile iron
Cooling Type : It is supplied by the air that the propeller at the back of the engine circulates inside the body. (Internal Cooling)
Insulation Class : F / H
Working Regime : S1
Ambient temperature : 40 C
Motor Protection : Thermistor and Motor Protection Relay
Structure Size : 90 - 200 (Contact us for different types of needs.)
Rated Power : 0.55 - 30 kW
Pole Number : 2 - 4 - 6 - 8 -10 - 12 - 16
Protection Class : IP55 (Contact us for higher protection classes.)
Voltage : 380 V (Contact us for different voltages.)
Frequency : 50 Hz (Contact us for different frequencies and speed control devices.)
Build Type : B3 (Contact us for different structure types.)
Mechanical Structure : Body and covers are cast iron, Legs are ductile iron.
Cooling Type : IC 411 (Contact us for different cooling types and for forced cooling.)
Insulation Class : F (Contact us for different insulation classes.)
Working Regime : S1 (Contact us for S2..S10 operating regimes.)
Ambient temperature : 40 C (Contact us for higher ambient temperatures.)
Motor Protection : Thermistor and motor protection relay for over 250 types (Applicable to smaller types.)
Structure Size : 90 - 355
Rated Power : 0.37 / 1.66 30/37 kW
Pole Number : 16 / 4-12 / 4-16 / 6-8 / 4-6 / 4-12 / 6-16 / 2-4 / 2
Protection Class : IP55 (up to 280 types), IP65 (315 types and above) (Contact us for higher protection classes.)
Voltage : 380 V (Contact us for different voltages.)
Frequency : 50 Hz (Contact us for different frequencies and speed control devices.)
Build Type : B3 (Contact us for different structure types.)
Mechanical Structure : Body and covers are cast iron, legs are ductile iron
Cooling Type : IC 411 (Contact us for different cooling types and for forced cooling.)
Insulation Class : F / H (Contact us for different insulation classes.)
Working Regime : S1 (Contact us for S2..S10 operating regimes.)
Ambient temperature : 40 C (Contact us for higher ambient temperatures.)
Motor Protection : Thermistor and motor protection relay for over 250 types (Applicable to smaller types.)
Structure Size : 160
Rated Power : 1.25 - 6 kW
Pole Number : 16 - 4
Protection Class : IP23
Voltage : 380 V (Contact us for different voltages.)
Frequency : 50 Hz (Contact us for different frequencies and speed control devices.)
Build Type : A4 - B3 - B9
Mechanical Structure : Body cast iron
Cooling Type : IC 410 (Cooling by forced cooling fan)
Insulation Class : F (Contact us for different insulation classes.)
Working Regime : S3 - S5
Ambient temperature : 40 C (Contact us for higher ambient temperatures.)
Motor Protection : On request, a thermistor can be installed and a motor protection relay can be provided.
