RIT001 has a high gain and measurement accuracy in the full bandwidth range, due to the application of the
multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing
DC sensor technology.
Primary Nominal Current: DC0.01,
Overload Capacity: 200% for 1 minute,
Power Supply: DC14.2V to 15.8V,
Output Voltage: ±1V,
Accuracy: 1%,
Linearity: 0.2%,
Zero Offset Voltage: ±10mV,
Dynamic Response Time: 2ms,
Frequency bandwidth(-3dB): up to 100KHz,
Insulation Voltage (Between primary and secondary): 5KV,
Operation Temperature Range: -40 ~ 85.
RIT01M has a high gain and measurement 0.2% accuracy in the broad bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on topof currently existing DC sensor technology.
Accuracy: 0.2%.
Linearity: 0.1%.
Zero Offset Voltage: �±10mV.
Dynamic Response Time: 2ms.
Frequency bandwidth(-3dB): up to 100KHz.
Insulation Voltage (Between primary and secondary): 5KV.
Operation Temperature Range: -40 ~ 85â??.
RIT series leakage current transducer is designed for residual and micro current measurement from 0.01A to 10A, and output with voltage. It has been used for vacuum coating and data center power supply systems.
RIT01M has a high gain and measurement 0.2% accuracy in the broad bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on topof currently existing DC sensor technology.
Accuracy: 0.2%.
Linearity: 0.1%.
Zero Offset Voltage: �±10mV.
Dynamic Response Time: 2ms.
Frequency bandwidth(-3dB): up to 100KHz.
Insulation Voltage (Between primary and secondary): 5KV.
Operation Temperature Range: -40 ~ 85â??.
RIT series leakage current transducer is designed for residual and micro current measurement from 0.01A to 10A, and output with voltage. It has been used for vacuum coating and data center power supply systems.
Nominal Current(RMS):25/50/75/100A
Vout@Ipn:+_25/50V
Measuring Range:0~+_150A
Supply Voltage DC:+-12-15V
Accurancy@Ipn,+25degree Celsius:less than +_0.5%
Mounting(mm):7.0*12.7
 * Closed- loop                                        * Supply voltage: DC +-12~15V
 * Capable measurement of currents: DC, AC,pulse with galvanic isolation between primary circuit and secondary circuit.
BMS300 fluxgate transducer is made of an excitation magnetic ring and a control circuit. Under normal
conditions, the control circuit generates a fixed excitation current frequency to alternately place the magnetic
core at the maximum saturation point. When the measured current flows, the primary current is measured by
detecting the symmetry of the saturation point.
The BMS series is suitable for battery monitoring systems that require high accuracy and low offset.
It can realize the isolation measurement between the primary current (high voltage) and the secondary
current (12V system).
CAS No. : 5026-62-0
Chemical Formula : C8H7O3
H.S.code : 291619
E No. : E218
Weâ??re Methyl p-hydroxybenzoate Manufacturers, Suppliers and Wholesalers in China.Based on our 15 years in food additives & ingredients market, we have a knowledge of China market and manufacturers. We can help our abroad customers save time selecting good manufacturers and update the current market in China.
Methyl p-hydroxybenzoate, E218, CAS No.5026-62-0, also called methyl paraben, is an organic compound manufactured through chemical synthesis, available as White crystalline powder used as antioxidants. Methyl P-Hydroxybenzoate is often used as an anti-fungal food preservative in chewing gum, dairy products, fat spreads, fruit products, etc. It can inhibit drosophilia growth in the larvae and pupae stages. As Methyl p-hydroxybenzoate Manufacturers, Suppliers and Wholesalers in China, we supply Methyl p-hydroxybenzoate food grade FCC,USP,EP.
Methyl p-hydroxybenzoate powder Specification
ITEM STANDARD
Appearance White crystalline powder
Purity (on dry base)% 99
Melting point 125-128
Sulphated ash % <0.05
Acidity (mlNaOH0.1M) 0.1
Loss on drying % 0.5
Residue % 0.10
Arsenic (ppm) 1
Heavy metals (Pb)ppm 10
Mercury (mg/kg) <1
Lead (mg/kg) <5
Clarity and color of solution Clear and transparent
We are a leading manufacturer of high-performance sensors engineered to deliver accuracy, reliability, and innovation across industries. With 30 years of expertise in advanced sensing technology, we design and produce cutting-edge solutions that empower automation, IoT, and smart systems worldwide.
CURRENT TRASDUCER GPA
Deyang YOYIK have power plant professional accessories, non-standard pieces, to spare parts for processing. Only need to figure the number of other companies need drawings and drawings number. If you have any questions or concerns, please contact us. YOYIK has a good talent pool, the company is developing, you need to support, in order to witness its growth.
Yoyik can offer many spare parts for power plants as below:
#DF-CURRENT TRASDUCER GPA-DF
Magnetic Resistance Speed Sensor CS-1-G-065-06-01
LVDT 3000TDGN-40-01
Steam turbine bolt electric heating rod ZJ-17-13
HP CASE EXPANSION SENSOR TD-2-25
Digital temperature measuring instrument 3T-1
Bolt electric heating rod ZJ-22-14
LVDT Sensor 4000TD-15-01
Eddy Current Sensor PR6426/010-141
Hydrogen leakage detection device probe LH1500-B
FOXBORO FBM214
Eddy Current Sensor PR6422/001-001
VELOCITY SEISMOPROBE 9200-01-02-10-00
LVDT transmitter XCBSQ-02/250-01-22
Liquid LevelTransmitter with sensor GB-2100C
Sensor DF311180-50-11-00
CLOSING/TRIP COIL ZN63(VS1)-12KV VCB OF 2000A, 210 Ohm
LVDT Sensor TDZ-FRD-308
high pressure transmitter BH-209028-209
use of thermometer WSS-481 0ï½?150â?? �?8�?100 M27�?2
Electronic Module P223CB01BD5
TRANSMITTER 264DS.A.S.H.B.2.B.1.V1...L1.B1
CONTROLLER WIHT BODBUS TCP INTERFACE SPBRC410
Sensor DF311180-50-04-00
Displacement transmitter LTM-4-S2
analog pressure sensor BH-038013-03
High wear resistance thermal resistance WZPHAR2-02
Control board ME8.530.014 V2-5
Gap Sensor Cable GJCFB-15
Cable WT0182-A50-B00-C00
Blind-free two-color water meter B69H-32/2-W
Embedded intermediate relay GZY-202/220V
displacement measurement transducer LVDT TDZ-1-H 0-300
Oil pressure sensor 32302001001
Water Analyzer Transmitter CM442-45T 8/0
LVDT Sensor TD-1 300S
LVDT Sensor TDZ-1E-45
CURRENT TRANSDUCER GPA
Nominal Current(RMS):10/25/50/75A
Vout@Ipn:2.500+_0.625V
Measuring Range:0~+_150A
Supply Voltage DC:+5V
Accurancy@Ipn,+25degree Celsius:less than +_0.5%
Mounting(mm):8.2 in diameter
Series: ce-ij03
Ce-ij03a(true rms)
Input range: 0.5a~300a
Output: 5v or 4-20 ma
Accuracy: 0.2% or 0.5%
Response time: 300 ms
Power source: +12v or +15v or +24v
Load capability: voltage outputú5ma
Current outputú300w
Quiescent power consumption: 200 mw
Attribute:
Rated input current 1mA, 5mA, 20mAâ?¦5A DC
Output signals 0-5V, 0-10V DC
Accuracy 0.2%
Input Impedance (R) approximate zero
Responding Time 350ms
Linear measuring range 0 - 1.2 times of rated input current
Over Load Capacity 30 times of rated input current, 5s
Frequency range 25Hzï½?5kHz
Output impedance 6V
Static current 10mA
Power supply +12V, +24V DC
Isolation Voltage(Input/Output) â?¥2500Vdc, for 1 minute
Output Ripple ï¼?6mV
Thermal drift 200ppm/°C
Ambient Temperature -25ï½?+50
Mounting DIN Rail 35mm Mounting or screw mounting
Material of shell ABS (According to UL94V-0)
Protection of shell IP20
Shell type without aperture
MTBF >50000h
Weight 90g
Attribute:
Rated input current AC 30A, 50A, 100A, 150A, 200A, 250A, 300A, 350A, 400A AC
Output signals 4-20mA DC
Accuracy 0.5%
Input Impedance (R) approximate zero
Responding Time 300ms
Linear measuring range 0 - 1.2 times of rated input current
Over Load Capacity 30 times of rated input current, 5s
Frequency range 25Hzï½?5kHz
Output impedance 6V
Static current 3.3mA(0mA-20mA)
6.8mA(4mA-20mA)
Power supply +12V/+24V DC
Isolation Voltage(Input/Output) â?¥2500Vdc, for 1 minute
Output Ripple ï¼?6mV
Thermal drift 350ppm/°C
Ambient Temperature -10ï½?+50
Mounting DIN Rail 35mm Mounting or screw mounting
Material of shell ABS (According to UL94V-0)
Protection of shell IP20
Shell type with aperture Ф20mm
MTBF >50000h
Weight 120g
BMS500 fluxgate transducer is made of an excitation magnetic ring and a control circuit. Under normal
conditions, the control circuit generates a fixed excitation current frequency to alternately place the magnetic
core at the maximum saturation point. When the measured current flows, the primary current is measured by
detecting the symmetry of the saturation point.
The BMS series is suitable for battery monitoring systems that require high accuracy and low offset.
It can realize the isolation measurement between the primary current (high voltage) and the secondary
current (12V system).
PHEV and EV system may use different technologies of batteries. One very important parameter that mayinfluence the stability of the SOC is the temperature. The battery temperature affects vehicle performance, reliability, safety and lift-cycle cost. The BMS500 series is qualified between -40 to 85 but the transducer shows a better accuracyinarestricted temperature range in order to deliver a very accuracy current measurement.
Current Transducer FPA-A1-P2-F1-03 hydraulic oil filter
Dongfang Yoyik Engineering Co., Ltd provides professional spare parts of turbines, generators, and boilers for brands. Our primary business are EHC, TSI, MEH, DCS, excitation system, hydrogen oil water system, sealing compounds, and insulation materials.
YOYIK provides multiple types of spare parts and equipments for power plant :
#DF-CURRENT TRANSDUCER FPA-A1-P2-F1-03-DF
thermocouple thermometer WRNK2-291
mechanic seal water pump HZB253-H75/110-C115-E1 00 11
magnetic coupling centrifugal pump DFB80-520-240
Screw pump HSNH210-36N
sealing ring HB4-56J8-146
shaft seal mechanical 8b1d
hydraulic piston pump spare parts 80AY100A
MECHNICAL TRIP DEVICE
rotary vane pump F320V12A1C22R
multi stage centrifugal pump CZ50-250C
burgmann mechanical seal CM104-45
vacuum pump 228v 30-WS-COML
electric motor centrifugal water pump DFB80-80-220-03
Sealing Oil Vacuum Pump Coupling Cushion M02225.OBGCC1
chemical pump centrifugal DFB80-80-240
thermocouple k WRNKD2-291
3 wire thermocouple TE-209Temperature sensor, Pt100 WZPM2-001
o-ring 315X3.55
vacuum pump 239v P-1607
ball valve MHARKH-22L-20-4465-PHPN350/DN20
centrifugal pump impeller ISG150-160
Platinum Thermocouple Wire WPNKZ-630
piston vacuum pump MCY14-1B
Thermocouple Control TE-211
Piston Ring for Exhaust Check Valve FH-84-200-2
3 wire thermocouple TC03A2-KY-2B/SPG
electric motor centrifugal water pump KQW100/200-22/2
Bladder NXQ-AB-80/10 FY
thermocouple machine TE-105
dc centrifugal pump DFB80-80-220-03
piston pumps PV29/-2R5D-F00
Gasket Pos.85
metal spiral gasket
thermowell flange WRN-230
mechanical seal types 1D56-H75/95-00 00 11
CURRENT TRANSDUCER FPA-A1-P2-F1-03
rotary vacuum pump 30-WS P-2811
vacum pump air vacuum M01225.0BGCC1D1.5A-100-5-1.5
heater thermocouple TC03A2-KY-2B/S20
Synchronous signal measuring card U12k type thermocouple W08B0691A
mechanical seal for pump BKM(FX)103055
Magnetic Reed Switch Level Transmitter BS-950MM6/12 AI ADAM-5017S
vacuum pump P-2037
centrifugal pump impeller CZ50-250C
pump mechanical seal G50
oil transfer pump SDH150-125-400A
piston pump hydraulic PVH74QIC-RSM-1S-10-C25-31
three screw pump KF80NZ/4.0F6
type k thermocouple TE-107
centrifugal water pump KSB65-250A
reciprocating piston pump PVH74-Q1C-RSM-1S-11-C25-31
centrifugal pump vertical DFB100-65-230
Surface Thermocouple TE-110
reciprocating pump 125LY-35-4
screw pump diagram DLZB820-R64A-2
vacuum pump 229v PVH74QIC-RSM-IS-10-C25-31
hand valve J61Y-P54 100V DN20
Filter element LH0330DO20BN3HC
pump screw HSNS440-46
Slot Wedge
thermocouple types W08Q0019A
thermocouple temperature sensor WRKK2-221
CURRENT TRANSDUCER FPA-A1-P2-F1-03
The CE-IJ03 1 element AC current transducer is designed to measure and monitor average RMS AC current, then produce a standard signal such as 4-20mADC, 0-5VDC and so on.
Rated input: 0-500AAC(average RMS current ; TRMS current optional)
