Single-port Ethernet power supply equipment, which is suitable for indoor use, can work normally from 100VAC to 240VAC input voltage. The power supply and network terminal equipment are connected by over five types of cables. It has an Ethernet data port and an output port after data and power combination. This device can provide POE power supply applications in line with IEEE802.3af/at international standards for all Ethernet devices, such as routers, switches, wireless AP, network telephones, industrial network terminals, network cameras, etc. It can also provide efficient engineering in places where power supply cannot be provided remotely or where power supply by Ethernet network lines can be used to improve system reliability and simplify equipment installation.
PT-PSE105GBS-E is an indoor rated fiber PoE Media converter specially designed for complex industrial backhaul and networking applications, special scenarios, like highway side, exurb, etc. Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, but can work outdoor by covered with waterproof case.
PoE Injector for information kiosks
After negotiating IEEE802.3bt standard PoE, the single PoE output port delivers 55Vdc, 1.63A up to 90W power with 6KV surge protection for remote PDs over 4 Pair at 10/100/1000Mbps data rates. High quality PoE Injector works with a wide input voltage of 12-48Vdc make it possible for solar application and operates under -40 to +65. It fully complies with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices, such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks.
PoE Injector for POS
For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables.
We are PoE supplier
PoE Injector for information kiosks Specifications
Parameter Description
Key Features Industrial Fiber PoE can be outdoor use by covered with waterproof case
Surge protection at PoE port
1000Base-FX to 10/100/1000Base-TX
SFP slot for Multi mode or Single mode SFP transceiver
Gigabit data rates
12-48VDC input make it possible for solar application
DIN Rail mount
IP40 high-impact metal enclosure
Extend temperature from -40 to 65
Diagnostic LEDs
Part Number PT-PSE105GBS-E
Ports condition SFP Port*1, PoE Output Port*1, DC input Terminal Block *1
Regulatory Compliance IEEE802.3bt
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10/100/1000 Mbps
Output Pin Assignment and Polarity:
4/5(+), 7/8(-) & 3/6(+),1/2(-)
Output Power Voltage: 55Vdc
User Port Power: 90W Guaranteen
Input DC Input Voltage: 12 to 48 Vdc
DC Input Current: 8.0A
PoE Injector for door locks
PT-PSE105GBS-D is a single port fiber PoE Media converter with 4 Pair PoE up to 90 watts of power with 6Kv surge protection
PoE Injector for displays
Designed for the PoE++ powered 90W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device.
PoE Injector for information kiosks
Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, designed for indoor use but can work outdoor by covered with waterproof case. It works with a wide input voltage of 50-57Vdc, the output voltage follows input and operates under -40 to +65, For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables. It is suitable for special scenarios, like highway side, exurb, etc.
PoE Injector for IoT application Specifications
Parameter high quality PoE Injector Description
Key Features Industrial Fiber PoE can be outdoor use by covered with waterproof case
Surge protection at PoE port
1000Base-FX to 10/100/1000Base-TX
SFP slot for Multi mode or Single mode SFP transceiver
Gigabit data rates
DIN Rail mount
IP40 high-impact metal enclosure
Extend temperature from -40 to 65
Diagnostic LEDs
Part Number PT-PSE105GBS-D
Ports condition SFP Port*1, PoE Output Port*1, DC input Terminal Block *1
Regulatory Compliance IEEE802.3bt
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10/100/1000 Mbps
Output Pin Assignment and Polarity:
4/5(+), 7/8(-) & 3/6(+),1/2(-)
Output Power Voltage: 50-57Vdc
User Port Power: 90W Guaranteen
Input DC Input Voltage: 50-57Vdc
Working Environment Operating Temperature: -40 to 65
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -40 to 85
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 5000meters
PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8
Common mode surge protection(10/700us): 6KV
Differential mode surge protection (10/700us): 1.5KV
AC Surge Protection Line-Earth 1.2/50us (8/20us):2KV
Line-Line 1.2/50us (8/20us): 1KV
Mechanical Characteristics Case: Metal
Color: Black
Mounting: DIN-rail
IP Rated: IP40
Connectors: Shielded RJ-45*1, SFP slot*1
Size:144.5 X 96 X 35.4mm
Weight: 485gï¼?1.1lbï¼?
LED Indicator Power Indicator: Green
PoE Load Indicator: Green
SFP fiber indicator: Green
PoE data indicator: Yellow
Warranty 2 year
Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device.
We provide high quality PoE Injector, UL certification PoE, POE for DIN Rail, dc poe injector and soon.
poe injector 60w
Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with Wall-mounted. It operates with a wide input voltage of 36-72 VDC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender).
high quality PoE Injector Specifications
Parameter PoE Injector for camera Description
Key Features Wall-mounted
Part Number PT-PSE106GW-AR-D
Ports condition LAN Port*1, DC Input Port*1, PoE Output Port*1
Regulatory Compliance
IEEE802.3bt
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10/100/1000 Mbps
Output Pin Assignment and Polarity:
4/5 (+), 7/8 () and 3/6 (+), 1/2 ()
Output Power Voltage: 55Vdc
User Port Power: 60W Guaranteen
Input DC Input Voltage: 36 to 72 Vdc
DC Input Current: 2.5A
Working Environment Operating Temperature: 0 to 40
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -20 to 70
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 5000meters
PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8
Common mode surge protection(10/700us): 6KV
Differential mode surge protection (10/700us): 1.5KV
Line-Earth 1.2/50us (8/20us): 6KV
Line-Line 1.2/50us (8/20us): 4KV
AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV
Line-Line 1.2/50us (8/20us): 1KV
Mechanical Characteristics Case: Plastic
Color: Black
Mounting: Wall-mounted
IP Rated: IP40
Connectors: Shielded RJ-45*2
Size: 193mmX 85mmX 41mm
Weight: 380gï¼?13.4ozï¼?
LED Indicator Power Indicator : Green
PoE Load Indicator : Green @â?¤30W
Blue @ï¼?30Wâ?¤60W
Warranty 2 year
Safety Approvals CE/FCC
PT-PSE105GB-E is a single port midspan Injector with 4 Pair PoE up to 90 watts of power at 55Vdc, at 1.63Amp with 6Kv surge protection.
Designed for the PoE++ powered 90W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, injecteur poe supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device.
China PoE Injector for IP Cameras
Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, designed for indoor use but can work outdoor by covered with waterproof case. It works with a wide input voltage of 12-48Vdc make it possible for solar application and operates under -40 to +65, For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables.
PoE Injector supplier and PoE Injector manufacturer :Creative Lianjie Network Technology Co., Ltd
injecteur poe Specifications
Parameter Description
Key Features Industrial PoE can be outdoor use by covered with waterproof case
Surge protection at PoE port
Gigabit data rates
12-48VDC input make it possible for solar application
DIN Rail mount
IP40 high-impact metal enclosure
Extend temperature from -40 to 65
Diagnostic LEDs
Part Number PT-PSE105GB-E
Ports condition LAN Port*1, PoE Output Port*1, DC input Terminal Block *1
Regulatory Compliance IEEE802.3bt
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10/100/1000 Mbps
Output Pin Assignment and Polarity:
4/5(+), 7/8(-) & 1/2(-),3/6(+)
Output Power Voltage: 55Vdc
User Port Power: 90W Guaranteen
Input DC Input Voltage: 12 to 48Vdc
DC Input Current: 8.0A
Working Environment Operating Temperature: -40 to 65
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -40 to 85
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 5000meters
PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8
Common mode surge protection(10/700us): 6KV
Differential mode surge protection (10/700us): 1.5KV
Mechanical Characteristics Case: Metal
Color: Black
Mounting: DIN-rail
IP Rated: IP40
Connectors: Shielded RJ-45*2
Size: 144.5mmX 95mmX 35.4mm
Weight: 400gï¼?0.88lbï¼?
LED Indicator Power Indicator: Green
PoE Load Indicator: Yellow
Warranty 2 year
2283 Poe Injector Suppliers
Short on time? Let Poe Injector sellers contact you.
Industrial poe injector
Pt-pse106gro wide-temperature midspan 30w
Standard
1) 55vdc, 30w output power
2) passed cttl signal and poe 6kv (10/700us) testing
3) temperature -40?-65?
1. Single-port 30w midspan
Pt-pse106gro is a single-port solution for remote powering of current as well as emerging high power applications.
It outputs 55vdc/550ma, 30watts.
2. Wide-temperature design
Pt-pse106gro work temperature -40?-65? for industrial environment or high temperature environment.
3. Lightning protection
Provide 8 lines power & signal 6kv(10/700us) lightning-protection for pd escape from lightning strikes.
4. Easy install
Pt-pse106gro with good adaptability to the temperature, there are four mounting holes to fixed to the wall by self-tapping screw or tied to shelf.
1. Input voltage: 100vac~240vac, 50hz~60hz
2. Output max power: 30w
3. Output current: 550ma
4. Data speed: 10/100/1000mbps
5. Output voltage regulation precision: 55vdc±5%
6. Loading: 55vdc±1%
7. Working temperature range: -40?~+65?
8. Size & weight
Size: 193mm*85mm*41mm
Weight: 380g
Standard
- ieee802.3 10base-t ethernet
- ieee802.3u 100base-tx fast ethernet
- ieee802.3ab 1000base-t gigabit ethernet
- support for ieee802.3af/at pd
- rohs compliant
- weee compliant, ce/fcc
- fcc part 15, class b
- en 55022 class b
- mtbf: 100, 000 h.@25?
Poe power output
- ethernet pin: 4/5(+), 7/8(-)
- data speed: 10/100/1000mbps
- output voltage: 55v
- output current: 550ma
- input ac voltage: 100-240vac
- input ac current: 1.0a@100-240vac
- ac hz: 50-60hz
FEATURES
+/- 48V DC input; 24V Passive PoE output
Provide power and access to device at the same time
Power-in/Power-out LED display
Easy-Positioning design, simple installation for vertical or horizontal direction
Dual (DC-in/battery) input power redundancy
OVERVIEW
PSE151DG is a 48V to 24V Gigabit PoE injector that it is flexible and convenient to be powered by a DC connector and Terminal block as redundant dual-Input design.
FEATURES
Compliant with IEEE802.3bt
90W output power on 4-pairs
Data Rate: 10/100/1000Mbps
Full protection for OCP, OLP, and OVP
LED indication for power and POE status
2-Pair PDs received power on 2-Pairs
Automatic Detection and Protection of Non standard Ethernet Terminals
Application: IP Telephones, Wireless Network Access Points, Blue Tooth Access Point IP Print Servers, Security Camera, etc.
Item: 48V 2A PoE Injector
Input Rated Voltage : 100Vac~240Vac
Input Frequency Range: 47Hz~63Hz
Input Inrush Current: 1.3A max
Efficiency: 87%(MIN)at Rated Voltage, level VI
Ripple and Noise: <120Mv at the full road with 20MHz bandwidth
Turn On Delay Time: <3S (AC:110V and full load)
Safety protection: over voltage and current protection for power adapter
Leakage Current: <5mA
Operating Temperature: 0°C----+60°C
Storage Temperature: -20°C----+85°C
Certificate: CE GS TUV UL/CUL FCC ROHS,SAA,PSE,C-TICK
Safety Standard :
EN60950-1 UL60950-1 ESD (EN61000 3-3)
CAS (60950 ITE/TE) FCC Part 15 subpart B Class B
AN/NZS CISPR 22:2006
Data connector RJ45 +24V pins4&5, Power Return pins7&8
Futures: Compliant with Isolation and Channel
Characteristics of IEEE802.3af
Data and Power carried over one Ethernet Cable
PT-PSE100GFN is a single port midspan Injector with 2 Pair PoE up to 15.4 watts of power at 48Vdc, 0.32 amp.
PoE Injector manufacturer:Creative Lianjie Network Technology
Designed for the AT powered 15.4W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3at devices.
We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon.
Enclosed in an IP40 fire retardant plastic case, designed for indoor use installation with Wall-mounted. It operates with a wide input voltage of 100-240Vac, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables.
can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender).
We are PoE Injector supplier and more information you can view here
Parameter PoE Injector for door locks Description
Key Features 1. Output: 48Vdc, 320mA, 15.4W
2. Transmission Rate: 10/100/1000Mbps
3. Power Pin: 4/5(+),7/8(-)
Part Number PT-PSE100GFN
Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*1
Regulatory Compliance
IEEE802.3af
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10/100/1000 Mbps
Output Pin Assignment and Polarity:
4/5 (+), 7/8 ()
Output Power Voltage: 48Vdc
User Port Power: 30W Guaranteen
Input Input Voltage: 100-240Vac
Frequency: 50/60Hz Typ
Working Environment Operating Temperature: 0 to 40
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -20 to 70
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 2000meters
AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV
Line-Line 1.2/50us (8/20us): 1KV
Mechanical Characteristics Case: plastic
Color: Black
Mounting:Wall-mounted
IP Rated: IP40
Connectors: Shielded RJ-45*2
Size: 135mmX 95mmX 35.4mm
Weight: 400gï¼?0.88lbï¼?
LED Indicator Power Indicator: Green
PoE Load Indicator: Green
Warranty 2 year
Safety Approvals CE, FCC
PT-PSE100G-24 is a single port midspan Injector with 2 Pair PoE up to 26 watts of power at 24 VDC at 1100 amp.
Designed for the outdoor PoE Injector, such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 0/100/1000Mbps of data rates. Fully comply with IEEE802.3af compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device.
Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with wall-mounted. It operates with a wide input voltage of 100-240 VAC, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables.
Can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender).
The POE Injector are Enclosed in an IP40 fire retardant plastic case, designed for indoor use, installation with Wall-mounted.
We are PoE Injector supplier and more information you can view here
We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon.
high quality PoE Injector Specifications
Parameter Description
Key Features 24VDC output voltage
Wall-mounted
Part Number PT-PSE100G-24
Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*1
Regulatory Compliance
IEEE802.3af
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10/100/1000 Mbps
Output Pin Assignment and Polarity:
4/5 (+), 7/8 ()
Output Power Voltage: 24Vdc
User Port Power: 26W Guaranteen
Input AC Input Voltage: 100 to 240 Vac
Frequency: 47 to 63Hz (50/60Hz Typ.)
DC Input Current: 1A
Working Environment Operating Temperature: 0 to 40
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -20 to 70
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 2000meters
PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8
Common mode surge protection(10/700us): 6KV
Differential mode surge protection (10/700us): 1.5KV
AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV
Line-Line 1.2/50us (8/20us): 1KV
Mechanical Characteristics Case: Plastic
Color: Black
Mounting: Wall-mounted
IP Rated: IP40
Connectors: Shielded RJ-45*2
Size: 134mmX 56mmX 33mm
Weight: 150gï¼?5.3ozï¼?
LED Indicator Power Indicator : Green
PoE Load Indicator : Green
Warranty 2 year
Safety Approvals CE/FCC
POE Injector For IOT Application PT-PSE10GN
PT-PSE10GN is a single port midspan Injector with 2 Pair PoE up to 15.4 watts of power at 48Vdc, 0.32amp.
We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon.
waterproof POE
Designed for the AF powered 15.4W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3af devices.
outdoor PoE Injector
Enclosed in an IP40 fire retardant plastic case, designed for plug and play indoor use with compact structure. outdoor PoE Injector operates with a wide input voltage of 100-240Vac 0.5A, The effective distance is 100 meters over Cat5e/Cat6 cables.
Can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender)
Parameter Description
Key Features Single-port
Wall-mounted poe
Part Number PT-PSE10GN
Ports condition LAN Port*1, PoE Output Port*1
Regulatory Compliance
IEEE802.3af
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10/100/1000 Mbps
Output Pin Assignment and Polarity:
4/5 (+), 7/8 ()
Output Power Voltage:48Vdc
User Port Power: 15.4W Guaranteen
Input Input Voltage:100-240Vac
Frequency:50/60Hz Typ
Working Environment Operating Temperature: 0 to 40
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -20 to 70
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 2000meters
AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV
Line-Line 1.2/50us (8/20us): 1KV
Mechanical Characteristics Case: plastic
Color: White
Mounting:
IP Rated: IP40
Connectors: Shielded RJ-45*2
Size: 83X 51X 69mm
Weight: 380g(0.83lb)
LED Indicator
Power Indicator: Red
PoE Load Indicator: Green
Warranty 2 year
Safety Approvals CE, FCC
60W PoE Injector PT-PSE104GB-60-10
PT-PSE104GB-60-10 is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55 VDC at 1.1 amp.
Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps/10GBps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device.
We are PoE supplier
Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with Wall-mounted. 60W PoE Injector operates with a wide input voltage of 100-240 VAC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables.
Can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender).
We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon.
Outdoor POE Injector Specifications
Parameter waterproof POE Description
Key Features Wall-mounted
Part Number PT-PSE104GB-60-10
Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*1
Regulatory Compliance IEEE802.3bt
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10GBit/s
Output Pin Assignment and Polarity:
4/5 (+), 7/8 () and 3/6 (+), 1/2 ()
Output Power Voltage: 55Vdc
User Port Power: 60W Guaranteen
Input AC Input Voltage: 100-240 Vac
Frequency: 47 to 63Hz (50/60Hz Typ.)
AC Input Current:1.5A
Working Environment Operating Temperature: 0 to 40
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -20 to 70
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 5000meters
PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8
Common mode surge protection(10/700us): 6KV
Differential mode surge protection (10/700us): 1.5KV
AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV
Line-Line 1.2/50us (8/20us): 1KV
Mechanical Characteristics Case: Plastic
Color: Black
Mounting: Wall-mounted
IP Rated: IP40
Connectors: Shielded RJ-45*2
Size: 145.51mm X 65.8mm X 33.5mm
Weight: 255gï¼?8.99ozï¼?
LED Indicator Power Indicator : Green
PoE Load Indicator : Green @â?¤30W
Blue @ï¼?30Wâ?¤60W
Warranty 2 year
Safety Approvals cUL/UL/FCC/CE
POE Injector For IP Cameras PT-PSE100GF
PT-PSE100GF is a single port midspan Injector with 2 Pair PoE up to 15.4 watts of power at 48Vdc, 0.32A amp.
Designed for the AF powered 15.4W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3af devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device.
We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon.
Enclosed in an IP40 fire retardant plastic case, designed for indoor use, installation with Wall-mounted. It operates with a wide input voltage of 100-240Vac, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables.
Can be extended with the PoE Injector for wireless APs PT-PEX-01G-OT(Outdoor or Indoor PoE Extender).
We are PoE Injector supplier and more information you can view here
Parameter Description
Key Features
Part Number PT-PSE100GF
Ports condition LAN Port*1,AC Input Port*1, PoE Output Port*1
Regulatory Compliance IEEE802.3af
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10/100/1000 Mbps
PoE Injector Output Pin Assignment and Polarity:
4/5 (+), 7/8 ()
Output Power Voltage: 48Vdc
User Port Power:15.4W Guaranteen
Input Input Voltage: 100-240Vac
Frequency: 50/60Hz Typ
Working Environment Operating Temperature: 0 to 40
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -20 to 70
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 2000meters
AC Surge Protection Line-Earth 1.2/50us (8/20us): 6KV
Line-Line 1.2/50us (8/20us): 4KV
Mechanical Characteristics Case: plastic
Color: Black
Mounting: Wall-mounted
IP Rated: IP40
Connectors: Shielded RJ-45*2
Size: 134 X 56X 33mm
Weight:170g(0.37lb)
LED Indicator Power Indicator: Green
PoE Load Indicator: Green
Warranty 2 year
Safety Approvals CE, FCC
PT-PSE106GW-AR is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55 VDC at 1.1 amp.
PoE Injector supplier:Creative Lianjie Network Technology Co., Ltd
Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device.
We provide high quality PoE Injector, UL certification PoE, POE for DIN Rail, dc poe injector and soon.
Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with Wall-mounted. UL certification PoE operates with a wide input voltage of 100-240 VAC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender).
high quality PoE Injector Specifications
Parameter Description
Key Features Wall-mounted
PoE Injector Part Number PT-PSE106GW-AR
Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*1
Regulatory Compliance
IEEE802.3bt
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10/100/1000 Mbps
Output Pin Assignment and Polarity:
4/5 (+), 7/8 () and 3/6 (+), 1/2 ()
Output Power Voltage: 55Vdc
User Port Power: 60W Guaranteen
Input AC Input Voltage: 100-240 Vac
Frequency: 47 to 63Hz (50/60Hz Typ.)
AC Input Current:1.5A
Working Environment Operating Temperature: 0 to 40
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -20 to 70
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 5000meters
PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8
Common mode surge protection(10/700us): 6KV
Differential mode surge protection (10/700us): 1.5KV
Line-Earth 1.2/50us (8/20us): 6KV
Line-Line 1.2/50us (8/20us): 4KV
AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV
Line-Line 1.2/50us (8/20us): 1KV
Mechanical Characteristics Case: Plastic
Color: Black
Mounting: Wall-mounted
IP Rated: IP40
Connectors: Shielded RJ-45*2
Size: 193mmX 85mmX 41mm
Weight: 425gï¼?15.0ozï¼?
LED Indicator Power Indicator : Green
PoE Load Indicator : Green @â?¤30W
Blue @ï¼?30Wâ?¤60W
Warranty 2 year
Safety Approvals cUL/UL/FCC/CE/PSE/SAA/BIS
This 24 Ports 10/100/1000M POE Injector also are called Power over Ethernet midspans devices, the 24 Ports 1000M PoE Injectorare based on the existing network interface and embed PoE function. This midspans have 24x2 Standard RJ45 network ports, onegroup of network ports are used for uplinking ethernet switches or other network devices, the other group of network ports support POE power+data output.PoE Injector provides a simple, economic, high-performance, intelligent Ethernet power supply and data communication solution.Simple to use, easy installation, superior performance, cost-effective. It is an ideal choice for customers to improve the quality of the project.
Main Feature:
Supply power to wireless access points and surveillance cameras over cat-5 cabling.
24 -Port 10/100/1000Mbps Data input
24 -Port 10/100/1000Mbps Data + Power output
industrial MeanWell power supply built in
passive 24v POE 4/5+,7/8-
Remote power feeding up to 100 meters
1U rack design, suitable for cabinet-mounted
Scalable Solution
The 24 Ports 1000M POE Injector support up to twenty four Ethernet terminals. Multiple midspans can be mounted in a wiring closet
to support additional terminals, providing a simple, cost effective method for expanding the network.
Easy to Use
The 24 Ports 10/1000M POE Injector are plug-and-play products. Once turned on, they automatically detect all Power over Ethernet
terminals and supply inline power.
