Presenting an action cam that’s tough enough to keep up with your adventures. The pocket-sized tg-tracker records ultra hd 4k video using advanced olympus optics. Take it places you wouldn’t dare take most cameras. Mountaintops. Winter slopes. Whitewater rafting or into the waves. Drop it, freeze it, submerge it, and it will just keep shooting – even 100 ft (30 m) underwater, no protective housing required. Handy extras like the led headlight and the tilt-out monitor help you nail difficult shots. Use the built-in action track sensors, gps, and wi-fi to record and share every awesome moment.
Characterized by its exceedingly durable design, the Tough TG-6 from Olympus is a sleek point-and-shoot capable of handling a wide variety of adventures. Featuring a 12MP BSI CMOS sensor and TruePic VIII image processor, the TG-6 offers notable image clarity and low-light performance to ISO 12800, along with fast 20-fps continuous shooting, 4K30p video recording, and high-speed Full HD 1080p shooting at 120 fps. Complementing the shooting capabilities is a versatile 4x optical zoom lens, which spans a 25-100mm equivalent range, and has an f/2 maximum aperture to benefit working in difficult lighting conditions.
Characterized by its exceedingly durable design, the Tough TG-6 from Olympus is a sleek point-and-shoot capable of handling a wide variety of adventures. Featuring a 12MP BSI CMOS sensor and TruePic VIII image processor, the TG-6 offers notable image clarity and low-light performance to ISO 12800, along with fast 20-fps continuous shooting, 4K30p video recording, and high-speed Full HD 1080p shooting at 120 fps. Complementing the shooting capabilities is a versatile 4x optical zoom lens, which spans a 25-100mm equivalent range, and has an f/2 maximum aperture to benefit working in difficult lighting conditions.
1. product introduction
Cam Action Door lock Set GL-11127 is apply to Trailers, Van Trucks,Contaniers and other truck types. This cam lock truck door is produced by high reputation Chinese factory. It is very popular in Europe market and international trade. A complete door Lock set has 1 forged upper cup clamp+ 1 forged upper lug cam+ 4 bracket top+ 4 strap bottom flat + 1 hasp assembly + 1 handle + 1 forged lower lug clasp + 1 forged lower lug cam. This door lock is made of malleable iron material and the surface treatment is zinc plated
2. Product details
2.1. Model: GL-11127
2.2. Material: Steel
2.3 .Surface Treatment: Zinc Plated
2.4. Suitable for all kinds of trucks which the door height isbetween2.1~ 2.7 meters
3. product picture
Cam Action Door Lock Kits for USA Market
Heavy Duty Cam Action Door LockCargo Trailer Swing Door Latch Lock
58 Olympus Tg Tracker Action Cam Suppliers
Short on time? Let Olympus Tg Tracker Action Cam sellers contact you.
Specializes in building moulds with cams, slides, lifters, core pull, collapsible core and automatic unscrewing actions.
In general, we submit our offer within 3 working days,
The plastic material we usually use includes abs, hips, pc, pc/abs, acetal, nylon, pmma, ppo, tpe, tpr, lsr, pe, pp, pbt, san and etc.
Mould base we use from lkm
We stock steel p20 (hrc 28-32), h13 (hrc48-52), s7 (hrc54-56), 420ss (hrc48-52) with high glass and anticorrosive, which are bought from u.S.A, germany and sweden. We use standard components from dme, progressive, hasco
Specializes in building moulds with cams, slides, lifters, core pull, collapsible core and automatic unscrewing actions.
In general, we submit our offer within 3 working days,
The plastic material we usually use includes ABS, HIPS, PC, PC/ABS, Acetal, Nylon, PMMA, PPO, TPE, TPR, LSR, PE, PP, PBT, SAN and etc.
Mould Base we use from LKM
We stock steel P20 (HRC 28-32), H13 (HRC48-52), S7 (HRC54-56), 420SS (HRC48-52) with high glass and anticorrosive, which are bought from U.S.A, Germany and Sweden. We use standard components from DME, Progressive, HASCO
Gps Tracker, Desh Cam, Assest Tracker, Personal Tracker, 4g Gps Tracker, Pet Tracker, Pet Solar Tracker, Obd Tracker, Ais140, Fuel Sensor, Id Card Tracker.
Dash cam, car DVR, car video, car camera, car blackbox, dod car DVR, full hd 1080p car DVR, rear view camera, dashboard camera, dash camera, car video recorder, car cam, action cam, sports cam, policeman camera.
1. All material of needles system is adopted the technology of Japan, and have a good stability wearable.
2. Drumless, fully computer control
3. Electro-pneumatic yarn finger and cam control
4. Stepping motor for elastic yarn and stitch cam control
5. The double picks, the double lift needle to beat a heel, can knit Y heel
6. Automatic stop by a sensor when every error occurs
7. Option of up to 2 main feeds + 5 pattern feeds (16 colour)
8. Equipped the UPS machine can keep the memory of program and the knitting action if transient electric power cut happened, when the power restored, machine can continue the knitting
9. Knitting can be operated through keyboard and LCD
10. The fog form of needle tube is even to provide oil, reducing fabric greasy dirt
Torsion spring forming machine
Specifications:
Wire diameter 0.15~1.0mm
Max length of front leg 50 mm
Max length of rear leg 50 mm
Max length of wire feed 100 mm
Spindle Axis Y Axis
Max spindle vertical stroke 40 mm
Min value 0.1 Degree
Max value 359.9 Degree
Max coils 999 Coil
Working direction L/H, R/H
Home action Unlimited
Motor capacity AC 750W
Cam axis X Axis
Min value 0.1 Degree
Max value 359.9 Degree
Max production speed 120 RPM
Motor capacity AC 750W
Power 3p 220V 50 / 60Hz
Pneumatic air pressure 4~5 kg/cm2
Machine gross weight 320 kg
Machine dimension 950 x 950 x 1700mm
The5 axis cnc wire forming machine comes with a wire rotary. Hence, it shows that the machine can able to attach a number of tools. As usual, the machineâ??s working remains the same. The machine helps to build the complex shapes of compression, tension, torsion, tower, and flat wire springs.
Input Materials: Stainless Steel, Aluminium, Brass, Bronze, Carbon Steel, Cold-Rolled Steel, Copper, Nickel, Titanium, etc. The input wire diameter ranges between 0.5mm and 3.8mm.
The input is loaded via decoiler unit, which consists of a reasonable capacity. The loading capacity of the decoiler ranges from 60Kg to 2000Kg. Then the wire straightening unit straightens the wire for building the output forms. Then it sends to the wire feeder roller and it transfers the wire through the quill rotary. Hence then the machine starts the forming processes. Then the holding tool is to hold the wire during the process if necessary. The cam CNC machine includes a number of bending tools as per the need. If necessary spinner action takes place.
Features of 5/6 Axis CNC Wire Forming Machines:
Imported Wire Feed Bearings
High-Strength Transmission Belt (German Technology)
Zero-Degree Gear
Cam Wire Rotary â?? Increases the rate of production
The 5 axis CNC spring forming machine operates with a Japanese servo motor and CNC programming unit. Therefore, the machine controls the process with the help of the CNC unit. The cam wire forming machine comprises of 1 motor with 8arms. Hence, it reduces the efficiency of the machine.
Industrial and Commercial Applications:
The 5 Axis CNC spring forming machines are widely expanding to a higher-lever in business. The Auto Link is now reaching a certain height globally through Alibaba and Made in China. Then the machines are broadly used in many industrial and commercial applications. Some of the examples are as follows:
Rat Trapping Spring
Drone Camera Frame
Light Chandelier
Glass Stand Tumbler Holder
Wall decor frames
Available Models:WF-525R & WF-538R
0.3-4.0mm Wire Rotating Spring Forming Machine
1. US-520R transfer spring forming machine adopts computer control system from Taiwan and servo motor imported from Japan, with convenient and fast operation, high speed, and high precision
2. It is divided into camshaft, feed spool, transfer spool, rotary spindle, take-up (optional accessories), five-axis synchronous operation
3. There are eight groups of sliders in the cam section, crank arm and cam rotation axis. The cam plate is fixed on the rotating shaft and can be screwed forward and backward, and used to push the movement of the slider. There are three ways of mechanical action: extrusion, stamping and forming
4. The feeding line system is installed behind the machine horizontally. There are 2 sets of feeding bobbins, each of which is a pair of feeding reels. US-520R reeling machine requires only one pair of feeding reels with 1.0 thread diameter and 1.0 or more available On the delivery line. Computer control wire length, the minimum wire feed unit is 0.01mm. Features: wear, minimal noise, high accuracy with the camshaft, rotating shaft.
5. The rotary shaft can control the rotation of the wire, and it is more simple and quick to realize the high-risk special-shaped spring adjusting machine speed.
6. The rotating mandrel can rotate forward and backward, and the curling device is installed on the slide, which can achieve multi-rotation positive/negative rotation
7. The position of each axis, the length of the feeding line, the production speed and the production quantity are all displayed on the screen. Editing and modifying program data, debugging is very convenient and quick
8. US-520R machine can produce all kinds of tension spring, pressure spring, tower spring, double torsion spring, flat spring and other opposite springs. Can be used in lighting, electronics, toys, home appliances, sports equipment, automotive and other industries need precision springs.
1. US-520R transfer spring forming machine adopts computer control system from Taiwan and servo motor imported from Japan, with convenient and fast operation, high speed, and high precision
2. It is divided into camshaft, feed spool, transfer spool, rotary spindle, take-up (optional accessories), five-axis synchronous operation
3. There are eight groups of sliders in the cam section, crank arm and cam rotation axis. The cam plate is fixed on the rotating shaft and can be screwed forward and backward, and used to push the movement of the slider. There are three ways of mechanical action: extrusion, stamping and forming
4. The feeding line system is installed behind the machine horizontally. There are 2 sets of feeding bobbins, each of which is a pair of feeding reels. US-520R reeling machine requires only one pair of feeding reels with 1.0 thread diameter and 1.0 or more available On the delivery line. Computer control wire length, the minimum wire feed unit is 0.01mm. Features: wear, minimal noise, high accuracy with the camshaft, rotating shaft.
5. The rotary shaft can control the rotation of the wire, and it is more simple and quick to realize the high-risk special-shaped spring adjusting machine speed.
6. The rotating mandrel can rotate forward and backward, and the curling device is installed on the slide, which can achieve multi-rotation positive/negative rotation
7. The position of each axis, the length of the feeding line, the production speed and the production quantity are all displayed on the screen. Editing and modifying program data, debugging is very convenient and quick
8. US-520R machine can produce all kinds of tension spring, pressure spring, tower spring, double torsion spring, flat spring and other opposite springs. Can be used in lighting, electronics, toys, home appliances, sports equipment, automotive and other industries need precision springs.
Finish:SSS
Material:cast iron
Applied gate width/gate weight:EN EU3/4#
Max door width:G?ñ1050mm
Max door weight:G?ñ150/200kg
Main boby size:L253*W118*H50
Application range:Plastic steel door, wood door, aluminum door, iron door
Main function :Double-way 180 degree opening function and 90 degree accurate stop
Feature:No damage after opening/closing of 500, 000 times
Warranty period :7 years .
The cylinder is made of high quality cast iron.
The closing force, door-closer speed and blocking action are stepless adjustable;
Provided with door stop function and explosion-proof device;
Standard or eccentric type can be chosen;
The height inside the frame can be adjusted by 4mm, the width by 5mm and length by 6mm
Widely applied in hotel, hospital, school, office building and other industrial and commercial buildings;
Complying with industrial applications of high requirement;it is suitable for indoor, outdoor, left and right door opening to realize double-way opening.
It adopts low temperature anti-freezing hydraulic oil and the application ambient temperature can reach -30-¦C+50-¦C.
Precautins:
1.During erection, the cam head must match with supporting arm and door chuck so as to avoid sounding from opening/closing due to poor matching.
***** cam head level can not be ground to avoid sounding from shaking of central positioning.
***** cam head must be erected with dust-proof cover to avoid oil leakage caused by impurities.
Precautions:
1.At completion of erection, the door closing speed can be adjusted by regulating screw;left turning for high speed and right turning for low speed.
2.After the front, rear, left and right position of floor spring, fasten the floor spring, therwise floor spring may shake during use.
3.During speed regulation, do not push or pull the door by force to avoid damage of door or floor spring.
3d Cnc Torsion Spring Making Machine Spring Forming Machine
Machine Parameter
Model US-20 US-35
Axis 3 3
Wire Diameter 0.3-2.5mm 0.8-3.5mm
Max Outside Diameter 50mm 80mm
Wire feeding wheels group 2 3
Wire feeding motor power 2.7kw 5.5kw
Cam Motor Power 2.7kw 5.5kw
Quil Rota on Motor Power 1kw 1kw
Dimension(mm) 160 0*700*1700 1650*1100*1900
Weight 1000kg 2000kg
Product Description
1. US-20 computer spring forming machine adopts Taiwan computer control system and Japanese imported servo motor, with convenient and fast operation, high speed and high precision
2. It is divided into camshaft, feed shaft, rotary shaft, take-up (optional accessories), and the four axes can run synchronously.
3. There are eight groups of sliders, cams and camshafts in the cam section. The cam plate is fixed on the rotating shaft and can be screwed forward and backward, and used to push the movement of the slider. There are three ways of mechanical action: extrusion, stamping and forming
4. The feeding system is installed on the back of the machine horizontally. There are 2 sets of feeding bobbins, each pair of feeding reels is a pair. The US-20 has only a pair of feeding reels with a thread diameter of 1.0 or less, and can be used with more than 1.0 pairs. Reel. Computer control wire length, the minimum wire feed unit is 0.01mm. Features: wear, minimal noise, high accuracy with the camshaft, rotating shaft.
5. The rotating mandrel can rotate forward and backward, and the curling device is installed on the slide, which can realize multi-rotation positive and negative rotation
6. The rotating mandrel can rotate forward and backward, and the curling device is installed on the slide, which can achieve multi-rotation positive/negative rotation
7. US-20 machine can produce all kinds of tension spring, pressure spring, tower spring, double torsion spring, flat spring and other opposite springs. Can be used in lighting, electronics, toys, home appliances, sports equipment, automotive and other industries need precision springs.
58 Olympus Tg Tracker Action Cam Suppliers
Short on time? Let Olympus Tg Tracker Action Cam sellers contact you.
