Each kind of test measurement such as Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test would be necessary for guarantee of the high quality of steel pipe like seamless steel pipe, galvanized steel pipe.
There are some characteristics for visual inspection of non-destructive testing:
1.Weld surface defects test: surface cracks would be the first step for check of the steel pipe and then the impermeability and weld quality of the leak.
2.Detailed exam for raw material for steel pipes production, such as the surface cracks, peeling, cables, scratches, dents, bumps, spots, corrosion and other defects.
3.Cavity detection. This test would carry out according to the engineering projects demand and the engineers requirement.
4. Additional material inspection. Inspect the product for dust, foreign matter and other residues in the cavity.
With different external probes, the gauge can be applied to measuring thickness of non-magnetic coating on magnetic metal substrate, as well as non-conductive coating on non-magnetic metal substrate.
Five types of probes (F400, F1, F10, N1, CN02) are available for different application. F10 probe measures up to 10mm.
Two measuring modes: single or continuous, changeable.
Two calibration methods can be applied to the gauge; And the system error of the probe can be corrected with the basic probe calibration method.
Measured values and user information are shown on a large, easy-to-read LCD. A display back light ensures easy reading of screen data in poorly-lit conditions.
Measuring status indicator showing the measuring status.
n.
Measuring Principles
The gauge adopts two thickness-measuring methods: magnetic induction method and eddy current method.
insulating coatings on all non-ferrous metals and on austenitic stainless steels, e.g. paint, anodizing coatings, ceramics, etc. applied on aluminum, copper, zinc die-casting, brass, etc.
Working Conditions
Working temperature£º -10¡æ¡«£«50¡æ;
Storage temperature£º-30¡æ¡«£«60¡æ;
Relative humidity: ¡Ü90£¥;
The surrounding environment should avoid of vibration, strong magnetic field, corrosive medium and heavy dust.
Configuration
No.
Item
Quantity
Remarks
Standard
Config.
1
Main unit
1
2
Probe
1
F1 or N1
3
Calibration Foils
5 PCS
4
Zero plate
1
Iron or Aluminum
5
Instrument case
1
Capable of performing measurements on a wide range of material.
Four transducer models.
Probe-Zero function, Sound-Velocity-Calibration function.
Two-Point Calibration function.
Two work modes: Single point mode and Scan mode.
Coupling status indicator showing the coupling status.
Auto sleep and auto power off function to conserve battery life.
Optional software to process the memory data on the PC.
Optional thermal mini-printer to print the measured data via RS232 port
CONFIGURATION
No
Item
Quantity
Note
Standard Configuration
1
Main body
1
With different external probes, the gauge can be applied to measuring thickness of non-magnetic coating on magnetic metal substrate, as well as non-conductive coating on non-magnetic metal substrate.
Five types of probes (F400, F1, F10, N1, CN02) are available for different application. F10 probe measures up to 10mm.
Two measuring modes: single or continuous, changeable.
Two calibration methods can be applied to the gauge; And the system error of the probe can be corrected with the basic probe calibration method.
Measured values and user information are shown on a large, easy-to-read LCD. A display back light ensures easy reading of screen data in poorly-lit conditions.
Measuring status indicator showing the measuring status.
The gauges¡¯ user-friendly measuring system permits automatic storage of up to 1000 readings in one memory matrix for later statistical evaluation.
Measuring Principles
The gauge adopts two thickness-measuring methods: magnetic induction method and eddy current method.
insulating coatings on all non-ferrous metals and on austenitic stainless steels, e.g. paint, anodizing coatings, ceramics, etc. applied on aluminum, copper, zinc die-casting, brass, etc.
Working Conditions
Working temperature£º -10¡æ¡«£«50¡æ;
Storage temperature£º-30¡æ¡«£«60¡æ;
Relative humidity: ¡Ü90£¥;
The surrounding environment should avoid of vibration, strong magnetic field, corrosive medium and heavy dust.
Configuration
No.
Item
Quantity
Remarks
Standard
Config.
1
Main unit
1
2
Probe
1
F1 or N1
3
Calibration Foils
5 PCS
4
Zero plate
1
Iron or Aluminum
5
Instrument case
1
The model MT160 is a digital ultrasonic thickenss gauge. Based on the same operatinfg principles as SONAR, the instrument is capable of measuring the thickness of various materials with accuracy as high as 0.01 /0.1mm. It is suitable for a variety of metallice and non-metallic materials.
Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials.
Transducer models are available for special application, including for coarse grain material and high temperature applications.
CONFIGURATION
No
Item
Quantity
Note
Standard Configuration
1
Main body
1
[input]
Input voltage range: 220vac10%; frequency: 50hz2%; input power: 5kw
[output]
Output voltage range: 20kv-450kv; kv adjusting accuracy: 0.1kw; output current: 30ma;
Ma adjusting accuracy: 0.1ma; cycle of operation: continuous
[working environment]
Temperature: 5-50µ; humidity: 80%; air atmosphere: 70kpa-106kpa;
Dimension of controller: 50034680mm; dimension of high voltage generator: 8304761080mm
