Pressure sensor module ms5803-14ba description:
The pressure sensor module ms5803-14ba is a new generation of high resolution pressure sensors with spi and i2c bus interface. It is optimized for depth measurement systems with a water depth resolution of 1cm and below. The sensor module includes a high linear pressure sensor and an ultra low power 24 bit î?î£ adc with internal factory calibrated coefficients. It provides a precise digital 24 bit pressure and temperature value and different operation modes that allow the user to optimize for conversion speed and current consumption. A high resolution temperature output allows the implementation of a depth measurement systems and thermometer function without any additional sensor. The ms5803-14ba can be interfaced to any microcontroller. The communication protocol is simple, without the need to programming internal registers in the device. The gel protection and antimagnetic stainless steel cap protects against 30 bar overpressure waterproof. This new sensor module generation is based on leading mems technology and latest benefits from the intersemaâ??s proven experience and know-how in high volume manufacturing of pressure modules have been widely used for over a decade. This sensing principle employed leads to very low hysteresis and high stability of both pressure and temperature signal.
Pressure sensor module ms5803-14ba features:
* high resolution 0.2 mbar
* fast conversion down to 1 ms
* low power, 1ua (standby < 0.15 ua)
* integrated digital pressure sensor
* supply voltage 1.8 to 3.6 v
* operating range: 0 to 14 bar, -40 to +85 'c
* i2c and spi (mode 0, 3)
* no external components (internal oscillator)
* excellent long term stability
* hermetically sealable for outdoor devices
Pressure sensor module ms5803-14ba applications:
* mobile water depth measurement systems
* diving computers
* adventure or multi-mode watches
Description:
The MS5803-14BA is a new generation of high resolution pressure sensors with SPI and I2C bus interface. It is optimized for depth measurement systems with a water depth resolution of 1cm and below. The sensor module includes a high linear pressure sensor and an ultra low power 24 bit Î?Σ ADC with internal factory calibrated coefficients. It provides a precise digital 24 Bit pressure and temperature value and different operation modes that allow the user to optimize for conversion speed and current consumption. A high resolution temperature output allows the implementation of a depth measurement systems and thermometer function without any additional sensor. The MS5803-14BA can be interfaced to any microcontroller. The communication protocol is simple, without the need to programming internal registers in the device. The gel protection and antimagnetic stainless steel cap protects against 30 bar overpressure waterproof. This new sensor module generation is based on leading MEMS technology and latest benefits from the Intersema's proven experience and know-how in high volume manufacturing of pressure modules have been widely used for over a decade. This sensing principle employed leads to very low hysteresis and high stability of both pressure and temperature signal.
Features:
* High resolution 0.2 mbar
* Fast conversion down to 1 ms
* Low power, 1 μA (standby < 0.15 μA)
* Integrated digital pressure sensor (24 bit Σ ADC)
* Supply voltage 1.8 to 3.6 V
* Operating range: 0 to 14 bar, -40 to +85 'C
* I2C and SPI (Mode 0, 3)
* No external components (Internal oscillator)
* Excellent long term stability
* Hermetically sealable for outdoor devices
Applications:
* Mobile water depth measurement systems
* Diving computers
* Adventure or multi-mode watches
TVS Neo XR by the Duralife Engine, which combines a sophisticated roller-follower mechanism and a high-pressure oil lubrication system to dramatically reduce friction, making it more durable. By continuing to carry iEcono technology, it helps drivers control fuel usage. iEcono technology is supported by a Throttle Sensor which stimulates the optimal ignition system according to driving conditions.
4447 Ms5803 14Ba Pressure Sensor Module Suppliers
Short on time? Let Ms5803 14Ba Pressure Sensor Module sellers contact you.
Electronic components motorcycle parts and auto parts like ic, adapter, connector, sensor, module, fuse, transformer, capacitor, resistor, led light, diode, triode, switch, buzzer, potentiometer, relay and spark plugs..
The fuel rail sensor, commonly referred to as the Fuel Pressure Sensor, it is installed at one end of the oil rail to measure the fuel pressure in the common rail pipe.
Fuel Pressure sensor 4930429 is a part of vehicle s fuel system and designed to monitor the fuel pressure that is present at the fuel rail. It sends this signal to the ECU, which then uses it to make adjustments to the vehicle s fuel and timing. When the sensor has an issue it can cause problems with the performance of the vehicle.
Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection
The products are 100% new and carefully packed.
1.Name: Fuel Pressure sensor,Fuel high Pressure sensor
2.Certification: CE, TS16949
3.Model NO.: 4930429
4.Function: Control emissions in combustion environments
5.Application: BOSCH CUMMINS DODGE KOMATSU
6.Ciondition: 100% NEW
7.Weight(g): 50.7g
8.Deliverytime: 7-15 days
9.Packing: Neutral packing Customize according to customer needs
OUTPUT : 4-20 MA
SUPPLY : 24 VDC
TYPE :2 WIRE
PRESSURE TRANSMITTER CAPSULE TYPE
PROTECTION CLASS : IP 65
PROCESS CONNECTION : 1/2 " BSP;1/2"NPT ;1/4"BSP;1/4"NPT
FIXED RANGE CAPSULE TYPE
MS5803-30BA
High resolution Miniature 30 bar Pressure Sensor
Description:
The MS5803-30BA is a new generation of high resolution pressure sensors with SPI and I2C bus interface. It is optimized for depth measurement systems with a water depth resolution of 2.5cm and below. The sensor module includes a high linear pressure sensor and an ultra low power 24 bit Î?Σ ADC with internal factory calibrated coefficients. It provides a precise digital 24 Bit pressure and temperature value and different operation modes that allow the user to optimize for conversion speed and current consumption. A high resolution temperature output allows the implementation of a depth measurement systems and thermometer function without any additional sensor.
The MS5803-30BA can be interfaced to any microcontroller. The communication protocol is simple, without the need to programming internal registers in the device. The gel protection and antimagnetic stainless steel cap make the module waterproof. This new sensor module generation is based on leading MEMS technology and latest benefits from MEAS Switzerland's proven experience and know-how in high volume manufacturing of pressure modules have been widely used for over a decade. This sensing principle employed leads to very low hysteresis and high stability of both pressure and temperature signal.
Features:
* High resolution module, 0.5 mbar
* Fast conversion down to 1 ms
* Low power, 1 μA (standby < 0.15 μA)
� Integrated digital pressure sensor (24 bit Σ ADC)
* Supply voltage 1.8 to 3.6 V
* Operating range: 0 to 30 bar, -40 to +85 'C
* I2C and SPI (Mode 0, 3)
* No external components (Internal oscillator)
* Excellent long term stability
* Hermetically sealable for outdoor devices
* High Endurance (HE version)
Applications:
* Mobile water depth measurement systems
* Diving computers
* Adventure or multi-mode watches
* High endurance pad technology (HE version)
Smp 6100 high stable oem sensor is the piezo-resistive pressure sensor with isolated construction and precise compensation. It uses mems silicon die, combined with our company's unique design and production process. Each product's production has adopted a strict aging, screening and testing processes, to ensure excellent quality and high reliability, and to provide high-quality products for the long-term use of customers.
This series of products can be reliably used in hydraulic systems, industrial process control and other application.
Features:
Measuring range: -100kp?¦0k10kp?¦100mpa
Wide temperature compensation: -0
Ss 316l
19mm*11.5mm standard oem pressure sensor
The SEN-Baro1 barometric pressure sensors combine a wide pressure measurement range, wide operating temperature range, high accuracy, low power use, and low cost into a small, rugged package. These sensors are ideal for continuous barometric pressure measurement on weather stations and providing routine pressure measurements for correction of sensor outputs that are sensitive to barometric pressure fluctuations
Type:Pressure Sensor
Car Make:General Auto
OE NO.:56041018AB;68002763AA;216519;AS158;5S2436
Place of Origin:Zhejiang, China (Mainland)
Brand Name:ANT Auto
Model Number:M-071
Warranty:1 Years
Product Name:Auto Pressure Sensor
OE NO.::68002763AA
1OE NO.::56041018AB
2OE NO.::216519
3OE NO.::AS158
4OE NO.::5S2436
Working Power Range:DC 9-16V
OEM Order:Accept
Shipping terms:DHL,Fedex,Ocean etc.
Delivery time:7-15 days
Size:OEM Size
Pdsm010 particle sensor module product summary
Pdsm010 detects approx. 1m particle such as house dust, pollen, germs, dust mites and cigarette smoke and measures the concentration of floating particles in a room space up to maximum 30m3.
This sensor is an ideal product for automatic room air monitoring system such as an air purifier.
Pdsm010's signal is converted to pwm output by internal circuit and mcu program. Also, the sensor's filter circuit and mcu program can remove a noise in order to operate more stably when a noise is in-flowed in the signal.
Pdsm010 has advantages of both stable detecting ability and high manufacturing efficiency.
The sensor does not have an additional control point (vr trimmer) on the device unlike its previous model (dsm). It prevents potential malfunction often occurred by user's arbitrary modification.
Pdsm010 particle sensor module features
* customized sensitivity for efficient control in application
* detects approx. 1m particle
* mcu control (factory calibration)
* easy maintenance
* pwm output (low logic pulse active)
* noise protection
Pdsm010 particle sensor module applications
* air cleaners, air conditioners
* ventilation system, fan control
* iaq monitoring & control
* iot device
1: It adopts all-stainless steel sealing structure, which has good moisture resistance and excellent media compatibility.
2: Using independent research and development amplifier circuit to greatly improve sensor signal output stability
3: The high reaction speed is adopted, so that the sensor can react to the change of the liquid pressure at any time, and the measurement result is more accurate and error-free.
Application: Widely used in pressure measurement and control of industrial equipment, water conservancy, air compressor pressure, pump water valve, constant pressure water supply.
Mechanical connection (threaded interface): 1/2-20UNF, M14Ã?1.5, M20Ã?1.5, M22Ã?1.5, etc. Other threads can be designed according to customer requirements
Pressure sensor, pressure transmitter is a high-quality pressure sensor developed by Honghua heng, pressure transmitter
