Features:
Low insertion loss and high return loss
Small bending radius, excellent mechanical and environmental performance
Good exchangeability
Good durability
High temperature stability
Available :
Simplex/duplex patch cord available
Fan-out available
Pigtail available
Various boot(cable) sizes available
Fc/lc/sc/st/mtrj/mpo connectors available
Lszh and pvc cable
Applications:
Telecommunication
Computer networks
Catv networks
Active device termination.
1pc/plastic bag, bag size:18mmx22mm
Small carton:37x28x28cm
Big carton:59x39x30.5cm
1,suit for data center
2,singler mode and multimode
3,PC or APC
4,Operating Temperature(-40 to +80C)
4,Different IN index and various color available
5,Stable Performance index by PIN fixed position of connection
6,4,8,12...72 cores for one connector available
7,maximun cab be 288 cores each patch cord
8,Plug type connector with locking structure
9,High density which convenient for wiring and management system
10,Comply with Telcordi GR-1435-CORE and IEC standard
Nokoxinâ??s MPO/MTP 0.9mm Fanout Cable are designed to high density multi-fibers solutions, it designed to use fan -out kit convert to standard connectors. One side use MTP/ MPO high density multi-fiber connector and the other side usually with LC/SC/FC/MTRJ/E2000 and so on.It fit for dif-ferent installation environment and easy to install between 40/100G optical module equipment, data centers and buildings. Our cables are 100% factory tested and can meet your special requirements. All the MTP/MPO connector compliance with Telcordia GR-1435-Core Compliant.
Features:
.* MTP and MPO are available
* High performance in IL&RL
*100% pre-terminated tested
* Pulling eye design easy for cabling
11060 Mpo Patch Cord Suppliers
Short on time? Let Mpo Patch Cord sellers contact you.
The MPO/MTP is a multi-fiber patch cord suitable for high-density back plane and Printed Circuit Board (PCB) solutions in data and telecom systems . Used in transmitters and receivers , this connector offer up to 12 times the density of standard connectors , providing significant space and cost savings .
Precision molded MT ferrules , together with metal guide pins and precise housing dimensions ensure fiber alignment when mating. Mass termination is combinations of 4 , 8 or 12 fiber ribbon cables are available . Single-mode versions are offered with premium low-loss or standard and multimode versions are also available. Cable types include bare fiber ribbon and ruggedized ribbon (PVC Jacketed) . Push-pull latching mechanism with audible click ensures proper connection .
Features:
• Push-On/Pull-Off latching connector
• Either 4 , 8 , 12 & 24 fibers available
• Bare fiber ribbon type , ruggedized type and fan-out cord available
• Precision guide oin assures fiber alignment at mating
• Meet IEC61754 , TIAFOCIS 5/604-5 , bellcore GR-143 requirements
• High density and economical solution for mass termination fiber
Advantages :
• No on-site assembly necessary
• Simple reconfiguration
• High Packing fraction
• Various Configurations
MTP/MPO Micro Cable patch cord facilitate rapid deployment of high density cabling in data centers or other high fiber environments reducing network installation or reconfiguration time and cost.They are offered as standard 12 fibres using a compact and rugged 3.0mm Single Jacket MicroCable structure. The compact cables optimises patch cable-way use and improves the airflow. MTP/MPO MicroCable patchcords are built with highest quality components .Standard MTP/MPO as well low loss Elite versions are offered featuring low insertion loss for demanding high speed networks with critical power budget requirements.
Feature
High quality ferrules
High performance and reliability
12xfiber ferrule MPO/MTP
Provide narrow solution for high density application
Application
Data center infrastructure
Storage area network
Optical switch and router
Emerging 40Gbps and 100Gbps protocols compatible
Applications: CATV; Active device termination; Telecommunication networks; Metro; Local Area Networks; Data processing networks; Test equipment; Premise installation; Wide Area Networks;
Features:
---Low insertion and back reflection loss
---Good exchangeability
---Good durability
---High temperature stability
---Standard: Telcordia GR-326-CORE
Specifications
Items Single mode Multimode
PC UPC APC 62.5/125 50/125 50/125 10G
Insertion Loss <0.2dB <0.3dB
Return Loss í¦45dB í¦50dB í¦60dB í¦35dB
Durability <0.1dB typical change,
500 matings
Operating Temperature -40 to +75íµ -40 to +75íµ
Ferrule Hole Sizes 125.0+1/-0um, Conentricity:í_1um 125um,Conectricity:1í_3um
125.3+1/-0um, Conentricity:í_1um 127um,Conectricity:1í_3um
125.5+1/-0um, Conentricity:í_1um 128um,Conectricity:1í_3um
126.0+1/-0um, Conentricity:í_1um.
Pplication:
10 base-t, fast ethernet 100vg-anylan 100mbps, atm 155
Specfication:
Industrial standards:yd/t1019(amerial)ansi/tia/eia-568-b(internation)iso/iec
11801/71156
Conductor:7*0.18mm 24awg
Insulation:hdpe, frpe
Jacket:pvc, lszh, rosh
Enhance connector:rj45 8p8c 50'mic gold plating in the plug.
Length: 1mtr, 2mtr, 3mtr, etc. ( different length available on demand )
Color: blue, grey, yellow, red, green, etc. ( different color available on
Demand )
Working life: 20-25years
Original : china
Size ;8 or 8.3 or 8.7 or 9/125 (inner side or outside diameter) optional
Long: 3 meter (usual)
Connector : sc or st or fc optional
Mode type : multimode or single mode optonal
Fiber:single or double optional
1.End-Face Type: PC/UPC/APC
2.Fiber Diameter: 0.9mm, 2.0mm or 3.0mm
3.Available for simplex and duplex
4. The outer jacket can be PVC, LSZH, Armored etc
5.Available for different connectors: SC, LC, FC, ST, MPO, MTP, MU, DIN, D4, E2K etc
6. Fiber Type: Single mode fiber G652D, G657A1 and G657A2, Multimode fiber OM1, OM2, OM3 and OM4 are available
7. Low insertion loss and high return loss, high dense connection, easy for operation
8.Customer lengths and connectors are available upon request
Specifity, stability and reliable, low insertion loss, high return loss
Single mode and multi-mode(50/125m, 62.5/125m) cable jumper/pigtails are available
Single and duplex are available
Cable diameter:0.9mm, 2mm, 3mm.
Standards of iec
Simplex, duplex, and multi-fiber
Patch cord or pigtail fan-out cable available in standard and customized configurations
Singlemode and multimode versions
Pc, upc or apc end-face finishing
Lc, sc, st, fc, mtrj, mpo, mu, e2000, din, d4 are available
High return loss and low insertion loss
High reliability and stability.
Applications:
Telecommunication
Broadband(broadcast)
Fiber catv
Lan (including fitl, ftth and fttd)
Data networks
Type: utp-5e hsbtyv-5e 4*2*(7/0.203)
Structure:
Conductor: stranded o.F.C bare copper 7/0.203(mm);
Insulation: hdpe ª¦0.98(mm);
Jacket: flame retardant red or grey or blue or green or yellow pvc nom o.D.5.60 (mm);
Standard: yd/t1019 2001;
Application: work area twisted pair cable for digital communication application, also known as equipment twisted pair cable, is used for the wiring between telecom lead-outs and equipment in the building and residence comprehensive system. Meeting meets the requirements of 155mhz for transmittance performance, the cable uses multi-core stranded copper conductor so as to increase flexibility. Ití»s connected in t568b manner (rs-45 8p8c connector), with standard distance below 10m.
Type: ST, SC, FC, LC, SC/APC, MTRJ
Boot O.D: 0.9mm/2.0mm/3.0mm
Applications: gigabit ethernet, active interface device, test equipment, wide area network, data processing network, optical switch interframe connection , telecommunication network , premise installations , industrial etc
Availability
1.The Connectors can be supplied as a pre-assembled one-piece or as a connector Kits
2.Clips are available for duplex connectors
Specifications
SinglemodeMultimode
Insertion Loss<0.20dB<0.30dB
Return Loss>=45dB for PC Polishing
>=55dB for UPC Polishing
>=65dB for APC Polishing
Durability<0.1dB typical change,
500 matings<0.1dB typical change,
500 matings
Operating Temperature-40 to +75-40 to +75
Storage Temperature-40 to +75-40 to +75
Ferrule hole sizes125.3+1/-0um,
Concentricity 0.7um maximum125.5um, concentricity 2um maximum
125.5+1/-0um,
Concentricity 0.7um maximum127um, concentricity 2um maximum
126.0+1/-0um,
Concentricity 0.7um maximum128um, concentricity 2um maximum
