Combined relative pressure probe: conductivity, temperature and depth (CTD). In-situ measurement. Water level, level measurement in groundwater and surface water.
Relative pressure probe, measures water level and temperature. Integrated data logger. In-situ measurement Water level, level measurement in groundwater and surface water.
Measurement and data logging of atmospheric (barometric) air pressure. Compensation probe for absolute pressure level measurement. Water level measurement in ground and surface water.
* K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors.
It is also used for jointing chemical resisting stoneware pipes.
K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles.
The concrete surface needed protection should be dryed, clean and rough.
The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner.
When Bedding and Jointing Materials are the same.
On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints.
The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water.
Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic.
When Bedding and Jointing Materials are Different.
Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR
A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions.
PREPARATIONS OF MORTAR :
* Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan.
* Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar.
* In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared.
* The cement mortar will be used before it starts setting.
Optical Scale Sensor
The electronic volume scale on conveyor belts measures the volume of material on the band through an electro-optical sensor ( See Figure below ) and transfers the data to a a Programed mobile phone and it to the inclueded printer to print datas at sinde and or to computer for statistical purposes,
It works without contact with the material and therefore is not affected by vibration or dust, it carries out measurements on belts with different degrees of inclination, even when the inclination is varied during the work. Automatic measurement and data storage, data transfer via Bluetooth. failure factor 0.7%.
The measurement is based on the volume and the density factor of the aggregate will convert in weight
Smartscan is 8/16 channel dedicated universal input data logger used for data logging/acquisition system. It has n output
Gsm wi-fi compatibility
Serial, usb & rs-485 interface for communication
Firmware upgrade at user end
In-built rtc for timed & event based logging at high resolution
Easy to use, configurable , windows based software
Applications :
Cold storage in dairy & food industries
Blood banks & pharmaceutical industry
Hvac
Oil & gas industries
Weather station recording
Building & energy management
Process monitoring for maintenance and troubleshooting applications.
Smartscan : 8/16 ch universal input logger
Smartscan is 8/16 channel dedicated universal input data logger used for data logging/acquisition system. It has gsm/wi-fi compatibility which makes it ideal for temperature/ humidity monitoring & logging. It comes in two types : horizontal & vertical
Key features :
Support universal analog & digital inputs-mv, volt, ma, tc/rtd etc.
True 18 bit adc for accurate & stable reading
Local data storage with 4mb memory (60, 000 samples/channel)
24vdc sensor excitation output
Gsm wi-fi compatibility
Serial, usb & rs-485 interface for communication
Firmware upgrade at user end
In-built rtc for timed & event based logging at high resolution
Easy to use, configurable , windows based software
Product Description
Product Name2020 Premium LCD digital non-contact IR infrared thermometer for adults/kids
Measurement modeForehead mode
Effective distance5-10cm
Response time0.5s
Accuracy for human body 0./0.4
Working condition16 - 35 (50 - 104), RH85%
CertificateCE FDA
MaterialABS
Battery type3.0V(AAA*2)
1. Non-Contact Design, Safe and more hygienic to use.
2. Quick to get data for just 1 or 2 second, smart and convenient.
3. Users can quickly get measurement results after positioning properly the temperature probe in the forehead.
4. Tri-color back light, display green, yellow & red with fever alarm function.
5. Memory function: Memory recall of 50 reading.
6. Switching between Fahrenheit and Celsius.
LOOKING FOR BUYERS FROM WORLDWIDE.
CONTACT : MR Paul
Application
Use for control and connecting cable on data transmission within building management system, speaker audio system and control measurement. Suitable for use in dry and damp environment.
Cable Structure & Features
Conductor Material : Tinned copper stranded
Insulation : Semi-Rigid PVC
Drain Wire : Tinned copper stranded
Shielding : Aluminium foil laminated screen
Outer Sheath ; PVC
Sheath Colour : black or gray
Technical Data
Standard : UL Style 2464
Approvals : UL apporoved
Rated Voltage : 300V
Testing Voltage : 1500V
Flame Retardant : VW-1
Insulation Resistance : Min 20Mx km
Min. Bending Radius : 10 x cable diameter
Operating Temp. : -30C / +80C
Ld 9100 series temperature and humidity data logger has internal high-precision sensors for temperature or temperature and humidity measurements. The device stores maximum 65000 measuring data automatically with selectable intervals from 1s to 24h. It is equipped with intelligent data analysis and management software for data download, graph checking and analysis, ect.
This device is designed with lcd, led indicators and buttons. Realtime readings and alarm information can be displayed on lcd. The two leds flash in red, green and yellow colors to indicate the status of working and alarming. It’s easy to operate with the two buttons to browse realtime readings, start & stop logging and power on or off, etc.
Specifications:
Model no.: Ld 9101, ld 9102, ld 9103, ld 9104
TemperatureRange-30~80?(-22~176?)
Accuracy±0.5?
Resolution0.1?(0.2?)
Humidity range --0~100%rh
Accuracy-±3.2%rh±2.2%rh±2.2%rh
Resolution0.1%rh
Data port Usb
Waterproof levelIp65
Display Lcd
Sampling rate1 second ~24 hours selectable
Records 65000 data
SoftwareStandard, compatible with windows/vista?windows2000/2003?windows7?8?10 systems
Power supplyBattery type1*cr2450 3v
Dimension92mm*35mm*20mm
Weight Approx. 60g
Universal and flexible data logger with up to 32 configurable input channels with integrated 4G/LTE cellular modem. Cloud connectivity, secured server data transfer. Application areas: Groundwater, surface water, water quality, meteorology
Data logger with integrated 4G/LTE cellular modem for connection to pressure and multiparameter probes. Remote data transmission Application areas: Groundwater and surface water
Universal and flexible data logger, integral 4G modem for data transmission: up to 100 configurable input channels. Application areas: Groundwater, surface water, water quality, meteorology
The WindLog is a compact wind data logger designed to accurately measure and record wind speed, direction, and gust for optimizing turbine placement and performance. Includes WindSoft free software package to generate statistics, graphs, and reports.
2268 Measuring Data Logger Dipper Ptec Suppliers
Short on time? Let Measuring Data Logger Dipper Ptec sellers contact you.
