Suitable for applications with high speed rotations.Can be used for most applications.
Suitable for applications with low mechanical rigidity such as drive belt machinery.
2 Axis Servo Robot Supplier Supplies 2-Axis Servo Robot Arm, for Plastic Injection Molding Machine, Travel 600-800mm, IMM Range 50-250 Ton, AC Servo Motor.
Runma 2 axis 600-800 Series traversing robot arm is applicable to all types of horizontal injection machine ranging from 50 to 250 ton for products and sprues take-out.
Single stage or telescopic type vertical arm, with product arm and runner arm, for two plate or three plate mold products take out.
Y-, Z-axis driven by AC servo motor, can realize products stacking up on any points at Y, Z directions, can cut the runner by scissors driven by the cylinder.
Runma Robot has exported products to more than 15 countries around the globe and been keeping win-win cooperation with business partners,Runma Robot only offers high quality molding robots and satisfying service,Please feel free to
For CNC, textile machine, printing machine, packaging machine, we usually use more than 1 motor in 1 machine. But the common servo drive in the market can only run 1 servo motor. Therefore we need such a servo drive which can run 2 motors together. Now it is launched. Whats more, it will save your cost and mounting space sharply! Its very suitable for CNC lathe machine, or other 2-axis machine.
HSV-162A uses the latest Digital Signal Processor (DSP) for motion control, Complex Programmable Logic Device (CPLD), and Intelligent Power Module (IPM). It features small size, easy installation, and easy commissioning. HSV-162A takes full use of processing chips and saves installation space. It is the preferred feed drive for your economical CNC machines.
Five control modes:
Full state display capability
Alarm memory capability
Customized input and output signal
Wide range of speed regulation ratio
Integration of main circuit and the input power supply of the control circuit
Small size and easy installation
AC servo drives and motors- Which is compatible with SIEMENS, FAGOR CNC controller, and all the types of PLC.
Dual-motor servo system Its very suitable for CNC lathe machine, or other 2-axis machine, save much cost.
Servo system for AC380V power input lower current, and higher torque, free of transformer.
Standard packaging.
1117 Mc800Ns302Ann09 Nidec Sankyo Robot Ac Servo Suppliers
Short on time? Let Mc800Ns302Ann09 Nidec Sankyo Robot Ac Servo sellers contact you.
Electric motors are essential components used to convert electrical energy into mechanical motion, powering a wide range of applications from household appliances to industrial machinery. Available in various types such as AC, DC, and stepper motors, they are known for their efficiency, reliability, and long lifespan. Electric motors are used in manufacturing, transportation, robotics, HVAC systems, and more, providing smooth, consistent performance with minimal maintenance requirements.
Company brief
Specialized in manufacturing hv (lv) & low voltage (lv) inverter, servo drive products and new energy products, zhejiang folinn is well- known manufacturing base in yangtze river delta, also honored as a zhejiang hi-tech enterprise. Folinn focus on r&d, manufacturing, sales and service for motor auto controlling products.
Folinns sales network has been reached out all major parts of china and all over the world.
Know more about folinn
1994 wenling city, the first chinese rivate enterprise founded, fuling started its frist step.
2000taizhou fuling motor co., ltd founded
2001 iso9001:2000/ce approved
2004 honored as one of the zhejiang high-tech enterprise
2007 elected as one of the first council members of ceeia inverter department. Posted on inverter industry authority magazine inverter world, honored as one of the china top 10 brands, chosen as the member of the year of 2007 by ceeia
2009 become the best commercial partner of infineon
2010 renamed as taizhou fuling electric co., ltd and registered capital increased to 5000000 usd dollars
2011 elected as one of the second council members of ceeia inverter department dzb 10hv series inverter has been approved as the zhejiang tech innovation special item
2012newly increase 2 more brands: fureen and b&b power
2013 won the honor of low voltage frequency inverter ten domestic brands
USED
Model Number: ELE-JSG014CB5F2
Product Description:
Recommendation of the same type part of inventory:
ESA-B014CF8-11
ESA-B014CFC-21
Profile:
We have a long-term stock of rare or discontinued international renowned automation accesories.
At the same time, we provide the fastst and most efficient MaIntenance Services for all kinds of cuscomers.
KOWEY Series Telescopic Arm Robot is applicable to all types of horizontal injection machine of 50T-1800T for take-out products and sprues. Model KWIII are with two types of arms, single stage and telescopic type. The single function is to clamp products, and the full function is to take-out products and sprues. Swing arm robot with one axis servo ranges of model KWX. After installed this robot, the productivity will be increased 10-30%, reduce defective rate, ensure safety of operators, reduce manpower and accurately control the output to reduce waste.
Panasonic minas servo motors are amongst the highest performance motors in the world. The product line-up offers a motor suitable for most high performance applications.
Package wight:6.5kg (13.228lb.)
Package size:
35cm x 30cm x 25cm (13.78in x 11.81in x 9.84in)
Mechanical dimension & rated power:
Frames Size Rated Power
60cm X 60cm 200-600 W
80cm X 80cm 400-1,000 W
90cm X 90cm 750-1,000 W
110cm X 110cm 600-1,800 W
130cm X 130cm 1,000-3,800 W
180cm X 180cm 2,700-4,500 W
For more information, please be free to contact us for detailed PDF datasheets.
1.Gear ratio: motors are available with any one of the following standard gear reduction ratios of 10, 30, 100, 300, 1000, 3000. (basic rotor speed is 2500 rpm).
2. Windings: motor windings are designated by means of two letters. First letter refers to the voltage to the reference phase and the second letter to the voltage on the control phase. The letter code for voltages is as follows: a = 230v, b = 115v, c = 115-0-115v, d = 23v, e = 11.5, f = 11.5-0-11.5.
Standard cotton box or as per customer requirement.
AC / DC electrical motors & drives, electrical & automation panels, electrical & mechanical spare parts, robotic & conveyor systems epc service, turn key svc and substation projects, hot / cold rolling mill EPC service, solar energy PP EPC service.
TH-2004C
Benchtop dispensing Robots with CCD vision system by PC programming
Patent Number ZL 2010 2 0120765.6
FEATURES
1.CCD vision system by PC programming
2.servo-motor driven ball screw design.Benchtop Robots boast a robust servo-motor driven ball screw design. This feature allows for heavier tool loads on both the worktable and the z-axis making this robot tough enough for a wide range of automated applications
3.Instead of traditional manual operation mode
4.SGS CE Safety Approved and environmental protection
Specificationï¼?
ITEM TH-2004C
X/Y/Zworking range 300 x 300 x 100mm
Dimensions (WxDxH) mm 500 x 580 x 610
Weight 42KGS
Standard CE Approved
XY/ZMaximum Load 15 kg / 5 kg
Repeatability 0.01mm
Resolution 0.001mm
XY/Z Speed 800/350 mm/Axis
Data memory capacity No limit HD
Positing CCD visual imaging systems /Electric "+"target confirm place
Imaging advance of CCD image location
Drive System AC servo motor
Transmission Threaded rod + Linear guide
Edit Programming Rocker/mouse/Keyboard
Control Method PC control, LCD display
Software TianHao 3 axis dispensing software
Patterns 3DLines, Circles, Arcs, Continuous Paths, XYZ simultaneous (CP) 3D
Help you more:
· Increase production efficiency
· Promotion processing precision control
· Improve product quality
· lower production costs, reduce rejected product
· Eliminate material waste
· Create more economic benefits for the enterprise
EDVAC Automation limited offers a very wide range of robots for customers. No matter if you want to buy arduino robot kits, Robot parts or Arduino motor, our robotic store has what you need! With robot kits, all the people can easily learn how to create a particular robot. By this way, people will be able to understand clearly the equipment. The robot kit featured here offer all the programming and assembling skills needed to meet the related requirements. Each kit is a great way for individuals or groups to research, design build and test.
3WD 48mm Arduino compatible Robot Kit 10014
This Robot kit is a 3 Omini wheels drive mobile robot kit, it could move forward, backward, left and right. Meanwhile, the 3WD 48mm Omini-Directional Arduino compatible Robot Kit supports Programmable in C, C + + and especially developed for hobby, professional and educational use.
The 48mm Omini wheel mobile robot kit includes microcontroller and motors. It makes you add more levels much easily as there are pre-drilled holes of screw and firm aluminum alloy body.
Features:
Programmable with C, C+ +
Easy to install
3 omni wheel drive
Omini wheel mobile robot kit
Includes Arduino microcontroller and continuous Servo motor
Aluminum alloy frame
Speed: 0.2 m/s
Pre-drilled holes make it expandable.
Specification:
Appearance: Circle
Power: 3W
Load Capacity: 2kg
Dimension(mm): 230*230*120
Net Weight: 1KG
Parts Included:
48mm Omni-wheel X 3
Servo Motor
Arduino 328 Controller
Arduino IO Expansion.
SAN-RPM series palletizing robot is four free-degree cylinder surface coordinate palletizing robot, mainly move by horizontal movement axis, vertical movement
axis, rotation foundation and front hand axis.
Model:SAN-RPM
Controlled axis:4 axis
Installation:Install on floor
Max. Motion Range(mm):3200
Motion Range
J1(rad):3.20
J2(rad):+1.65~-0.71
J3(rad):+0.30~-2.04
J4(rad):6.28
Max. Load Capacity:60Kg
Handing Capacity:900 time/hour
Drive capacity:AC servo motor drive
Placement accuracy:±025mm
Power:4KW
1117 Mc800Ns302Ann09 Nidec Sankyo Robot Ac Servo Suppliers
Short on time? Let Mc800Ns302Ann09 Nidec Sankyo Robot Ac Servo sellers contact you.
