Marine Loading Arm (MLA) is used to load or unload fluid from jetty pipeline to ship. We will customize it as per customer¡¯s requirements and the site condition. Currently, we have manual and electro-hydraulic operated MLA, range from DN150 (6¡±) to DN500 (20¡±), Emergency Release Coupler (ERC), Quick Connect/Disconnect Coupler (QC/DC) and Position Monitoring System (PMS) are also available at the customers option.
Marine Loading Arm (MLA) is used to load or unload fluid from jetty pipeline to ship. We will customize it as per customer¡¯s requirements and the site condition. Currently, we have manual and electro-hydraulic operated MLA, range from DN150 (6¡±) to DN500 (20¡±), Emergency Release Coupler (ERC), Quick Connect/Disconnect Coupler (QC/DC) and Position Monitoring System (PMS) are also available at the customers option.
Marine loading arm is designed for fluid transport between terminal and tanker pipeline system of liquid or gaseous state one kind of product.
If you need Tower Type Gangway, quick release hook, pillar gangway and marine loading arm, welcome to contact us.
Our company design and manufacture of Marine oil arm in the process of transmission,within the scope of normal trough boat drift with the tank ship linkage. Range through the monitoring system in the tank when the ship manifold drift out of the scope of work provides audible and visual alarm. And equipped with emergency escape system implementation under the condition of loading arm emergency escape and hull.More information please view here.
Features: tanker loading at top , upward connector.
Used for : crude oil, petroleum products and chemical medium.
Design pressure: 1.0MPa 1.6MPa 2.5MPa
Design temperature: í 50 below 0 degree centigrade to 80 degree centigrade
Cartons
54697 Marine Loading Arm Suppliers
Short on time? Let Marine Loading Arm sellers contact you.
Use scope: bottom load /unload,the connector can be downward or side direction,with QCDC(G12 G17)
Used for : crude oil , residual oil and so on.
Design pressure: 0.08below 0MPa to 2.5MPa
Design temperature: 50 below 0f80
The Mercury Verado 250 is a high-performance outboard motor known for its power and reliability. Here are some key specifications:
Engine Type: 4.6L V8
Horsepower: 250 hp
Steering: Digital Throttle & Shift (DTS)
Starter: Electric
Shaft Length: Available in 25" (X-Long) and 30" (XX-Long)
Power Trim & Tilt: Yes
Fuel System: Electronic Fuel Injection (EFI)
Alternator: 115-amp
Weight: Approximately 600 lbs (272 kg)
Cooling System: Water-cooled with thermostat & pressure-controlled
The Verado 250 also features the Advanced MidSection (AMS) for reduced vibration and noise, and Adaptive Speed Control (ASC) for maintaining engine RPM despite changes in load or conditions12.
The Volvo Penta TAMD41M-A is a reliable and powerful marine diesel engine. Here are some key specifications and features:
Engine Type: 6-cylinder, 4-stroke, direct-injected, turbo-charged marine diesel engine with aftercooler1.
Power Output: 147 kW (200 hp)1.
Cooling System: Freshwater cooled exhaust manifold and oil cooler1.
Alternator: 14 V/50 A1.
Other Features: Flexible front engine mounting, wet type exhaust elbow, lubrication oil filter, and turbo-charger
great range of new and used marine accessories. We are also main dealers for outboard engines . Outboard Services and Marine Ltd are based on the south coast of Cornwall. We have a great range of new and used marine accessories. We are also main dealers for outboard engines,
OUTBOARD BOAT ENGINE WHOLESALE
We got OUTBOARD MOTOR ENGINES for sale at VERY VERY CHEAP affordable prices. Varieties of them.
WE ARE SUPPLIERS OF HIGH QUALITY OUTBOARD ENGINES BOTH USED AND NEW.
EXTREME OFFSHORE PERFORMANCE AND DURABILITYâ??NOT TO MENTION STRIKING GOOD LOOKS.
item
value
Condition
New
Engine
4 Stroke
Fuel Type
Gasoline
Cylinders
6
Engine Position
OUTBOARD
Dimensions (L x W x H) (mm)
1266 x 729 x 1179
Brand Name
Outboard Engine Boat Motor
Model Number
Outboard Engine Boat Motor
Engine type
4 Stoke
Product Name
Outboard 4 Stroke
Displacement
52cc
Starting system
Manual
Warranty
1 Year
Type
4 Stroke Model
Control System
Tiller Control
Color
Black
Application
Marine SHIP
Engine Model
CM6D28C
engines,
OUTBOARD BOAT ENGINE WHOLESALE,
We got OUTBOARD MOTOR ENGINES for sale at VERY VERY CHEAP affordable prices. Varieties of them.
WE ARE SUPPLIERS OF HIGH QUALITY OUTBOARD ENGINES BOTH USED AND NEW.
EXTREME OFFSHORE PERFORMANCE AND DURABILITYâ??NOT TO MENTION STRIKING GOOD LOOKS.
OUTBOARD 4 STROKE
Mileage one to two hours used
Fuel Gasoline and Diesel
Gears Manual and Authomatic
Engine 4,6 and 8
Fashion Water Sport 20HP 30HP Yam aha Boat Engines New Outboard Motor
Many types of sport fishing boats using yam aha outboard motor. This four stroke engine with excellent fuel economy and clean emission performance. The high-powered outboard engine is equipped with a high-performance fuel nozzle, further enhancing its overall performance. The four stroke engine with advanced technology has excellent acceleration performance.
Engine type:4 stroke/4 cyl
Weight:36-58KG
Control typeremote
Fuel:Gasoline
Fashion Water Sport 20HP 30HP Yam aha Boat Engines New Outboard Motor
Many types of sport fishing boats using ya maha outboard motor. This four stroke engine with excellent fuel economy and clean emission performance. The high-powered outboard engine is equipped with a high-performance fuel nozzle, further enhancing its overall performance. The four stroke engine with advanced technology has excellent acceleration performance.
Specifications
Engine Type 16-Valve DOHC Direct-Action In-line 4
Displacement 2670 cc
Bore x Stroke 94x6.2 mm
Recommended Max RPM 5000-6000
Lubrication System Wet Sump
Fuel Management EFI
Ignition TCI
Starter System Electric
Alternator Output 12V - 37A with Rectifier Regulator
Operation Method Remote Control
Trim & Tilt Method Power Trim & Tilt
Digital Network Gauges with Fuel Management Standard
Gear Ratio 2.00:1
OEDA Emission Rating ????
Scavenging Double Overhead Camshaft
Fuel Management EFI
Oil Pan Capacity (litres) 5.8
Spark Plug LFR5A-11
Gear Shift F-N-R
Exhaust system Through Propeller Hub (Jet)
Prop. Engagement Spline
Specifications
Engine Type 16-Valve DOHC Direct-Action In-line 4
Displacement 2670 cc
Bore x Stroke 94x6.2 mm
Recommended Max RPM 5000-6000
Lubrication System Wet Sump
Fuel Management EFI
Ignition TCI
Starter System Electric
Alternator Output 12V - 37A with Rectifier Regulator
Operation Method Remote Control
Trim & Tilt Method Power Trim & Tilt
Digital Network Gauges with Fuel Management Standard
Gear Ratio 2.00:1
OEDA Emission Rating ????
Scavenging Double Overhead Camshaft
Fuel Management EFI
Oil Pan Capacity (litres) 5.8
Spark Plug LFR5A-11
Gear Shift F-N-R
Exhaust system Through Propeller Hub (Jet)
Prop. Engagement Spline
YAMAHA OUTBOARD ENGINES
HS Code 840820
PRICE = US$2,000/PIECE CIF
ORIGIN: THAILAND
PACKAGE: TONS
MIN ORDER:5 PIECES
DESCRIPTION
As well as its indestructible (almost) composite shaft, the great little M18 outboard is tough in every other sense too - from its hard-working, permanent magnet 12-Volt motor and its hardwearing, weed-resistant power propeller right down as far as its hard-to-damage casing. In short, it goes where you go. With no drama.
Electric-Drive Technical specs
Amp Draw 42
Voltage 12
Mount Feature Lever lock
Max Thrust (kg) 18.2
Speeds (FWD/REV) 5 FWD/3 REV
Digital Maximizer False
Shaft Length 914 mm
Battery Meter False
Control Telescoping Tiller
Built for the podium and bred to win, the 2020 GP1800R is back and faster than ever.
Since its release in 2017, the Yamaha GP1800R SVHO has completely dominated the Australian and World Pro Stock race scene. Pro Stock racing, also known as the â??Manufacturers Classâ??, provides the best comparison of out-of-the-box performance of each manufacturers race ski offerings.
From short course to long distance offshore endurance racing, no other watercraft model has achieved as many victories as the GP1800R SVHO over the last three years.
Engine Type: 4-stroke, 4-cyl DOHC, 16-Valve, Super Vortex High Output Marine Engine
HIPPING AND DELIVERY :
* We offer free shipping and delivery to all new customers, delivery is made directly to your doorstep.
* Delivery takes just 3 working days, no custom troubles because the company takes care of all procedures.
* We also offer wholesale and retail purchase, with good discounts the more you buy, the better your discount.
* Tracking number is issued immediately after shipment is done..
Payments
How To Order ?
Specification
Product
Authentic Product
Safe Packaging
Shock-Resistant - Three layer of packaging
Accessories
Comes with complete accessories in Original Box
Items
Original
Packing & Delivery
SHIPPING AND DELIVERY :
* We offer free shipping and delivery to all new customers, delivery is made directly to your doorstep.
* Delivery takes just 3 working days, no custom troubles because the company takes care of all procedures.
* We also offer wholesale and retail purchase, with good discounts the more you buy, the better your discount.
* Tracking number is issued immediately after shipment is done..
Payments
How To Order ?
Step 1 : Please tell us what model and quantity you need.
Step 2: We will make an Order Invoice for you to confirm the order details.
Step 3: When we confirm everything, You proceed with the payment arrangement.
Step 4: Finally we deliver the goods within the stipulated time.
FAQ
Q1: Can you accept small orders?
A: Yes, we accepted a trial order for the first time, it is the start of business and our long-term cooperation in the future.
Q2:.What's your payment terms?
A: We accept Bank , Alibaba Payment
Q3: What are the shipment terms ?
A: Express( DHL, FEDEX, TNT, UPS).
-- Takes 3-7 Days express delivery after receipt of payment.
-- Tracking number will be sent to you after shipment, you will receive all important shipping updates by email
Step 1 : Please tell us what model and quantity you need.
Step 2: We will make an Order Invoice for you to confirm the order details.
Step 3: When we confirm everything, You proceed with the payment arrangement.
Step 4: Finally we deliver the goods within the stipulated time.
FAQ
Q1: Can you accept small orders?
A: Yes, we accepted a trial order for the first time, it is the start of business and our long-term cooperation in the future.
Q2:.What's your payment terms?
A: We accept Bank , Alibaba Payment
Q3: What are the shipment terms ?
A: Express( DHL, FEDEX, TNT, UPS).
-- Takes 3-7 Days express delivery after receipt of payment.
-- Tracking number will be sent to you after shipment, you will receive all important shipping updates by email
Description by Manufacturer
ENGINE
Engine Type V6
Bore x Stroke 3.63 x 3.00 in. (921 x 762 mm)
Displacement 186 CID (3,046 cc)
DIMENSIONS
Shaft Length 25 in. (635 mm)
Weight 528 lb. (240 kg)
GENERAL
Propshaft Horsepower 175 HP (131 kW)
Full Throttle Operating Range 5000-6000 RPM
Gear Ratio / Shift F-N-R
Cooling Water-cooled with thermostat & pressure-controlled
The Mercury Diesel Outboard is a diesel two-stroke designed for light duty commercial patrol boat applications. The EPA certified engine joins the U.S. Department of Defense spec diesel outboard Mercury Marine released in May 2015. The Mercury Diesel Outboard features exclusive spark ignition, direct fuel injected 2-stroke technology which enables it to run on readily available ultra-low sulfur diesel fuel.
SPECIFICATIONS
HP: 175 HP (131 kW)
Engine type: V6
Displacement: 186 CID (3,046 cc)
Displacement: 3.0 L
Full throttle: 5000-6000 RPM
Shaft length: 25 in. (635 mm)
Gearcase ratio: 2.08:1
Dry weight *Lightest model available: 528 lbs (240 kg)
Bore and stroke: 3.63 x 3.00 in (921 x 762 mm)
Fuel system: 2-stage Direct Fuel Injection (DFI)
Cooling system: Water-cooled with thermostat & pressure-controlled
Gear shift: F-N-R
Exhaust system: Through prop
KEY FEATURES
Available with a 25â?? (635 mm) center section and the 2:1 Fleet Master gearcase in both right-hand and left-hand rotation.
Industry-exclusive spark ignition diesel engine. Glow plug ensures consistent, reliable cold starting.
Commercial patrol boat models meet EPA emissions standards.
Cylinder heads designed specifically for combusting diesel fuel.
High performance cylinder liners for maximum horsepower and optimal engine running quality.
Fuel/air mixture is injected into the combustion chamber at 95 psi for enhanced high rpm running quality.
54697 Marine Loading Arm Suppliers
Short on time? Let Marine Loading Arm sellers contact you.
