Find Verified Manual Auto Ttr Slitter Ttr Slitter Fs 1000 Suppliers, Manufacturers and Wholesalers

Machine data£º
Machine size: 2500*2500*1800mm£¨l*w*h£©
Weight: 1500-2000kgs
Power by: three phase 415v£¬50hz£¬4kw or single phase 220v£¬50hz£¬4kw
Air pressure supply: 0.6-0.8mpa
Technical data
1.,For jumbo roll width in max: 1010/1050mm
2.,For jumbo roll paper core:6 inch
3.,Jumbo roll dia.: 600/630mm in max
4.,Suit for film thickness in 4-20um (fax ribbon, barcode ribbon, coding foil, hot stamping foil ect.)
5.,Mechanical speed: 30-250m/min
6.,Working speed: 30/200m/min
7.,Jumbo roll installation: clamping without axle inside
8.,Jumbo roll position adjustable
9.,Finished roll spec: maximum rolling diameter:120mm
Finished rolls core in 1¡± or 1/2



Specialized in the slitting of thermal transfer ribbons such as fax film, barcode ribbon, coding foil and hsp.

Machine data:
Single phase 220v£¬50hz
Size: single shaft 600*400*450mm
Two shaft 600*400*450mm
Four shaft 1200*1050*530mm
Weight: 45-140kgs
Technical data
1. Suit for mini jumbo width max. In 250mm/330mm/450mm
Roll diameter max. In 140mm-300mm
2. Single rewinding shaft, two rewinding shaft and 4 rewinding shaft system suit for different demand
3. Rewinding width max. In 250mm/330mm/450mm.
Max. Rewinding roll diameter in 100mm-120mm.
Usage
1. Specially designed as the desk top mini slitter for ttr films like fax ribbon, barcode ribbon, coding foil and hot stamping foil.
2. It is for ink side in/out, 1 inch and 1/2 inch core change, long length to short length rewinding and slitting work
3. The max. Unwinding roll diameter is in 300mm



Specialized in the slitting of thermal transfer ribbons such as fax film, barcode ribbon, coding foil and hsp

Xiamen delish automation equipment co. Ltd is the professional producer of ttr slitting machines, hot stamping foil slitting machines and small corollary equipment. After the first magnetic control ttr slitter in 2000, which was produced by ourselves and based on the experience of german techniques, we have expanded to a wide range of products, involving new server motor control series suitable for different slitting speed requires, full set of corollary equipment such as paper core cutting machine, paper core notch cutting machine, ribbon rewinding machine, small jumbo roll rewinding and slitting machines and more. All our machines are with ce certification. The highest speed of slitter goes to 200m/min. We adopt siemens plc touch screens, sanyo server motors and airtac parts as main parts. With high quality assurance, better after sales and convenient maintenance, our products are highly recommended to main ttr slitting factories in china and overseas.
We also offer full set of slitting training and factory work experience. Contact us now.

GL-212  faster 230m/min slit speed non stop change shafts auto bopp tape slitter machine
Detailed description of  Adhesive Tape Slitting Machine?
 Function:  Adhesive Tape Slitting Machine making different size small tapes from jumbo roll.

Box dimension - 1000mm x 750mm x 750mm
Box Material - Stainless steel 304 L box with mirror finish inside brushed finished outside
Acid resistant
Box panel/window Openable Front window with polycarbonate an extra coating for chemical and scratch resistance One

Feed through electrical single phase 220 V - 16 A
Attainable purity < 100ppm H2O and < 500ppm O2 at complete pressure range.
O2 = 20 l , H2O = 960 g
Filtration HEPA : particles
Glove Ports - Glove ports, 220mm diameter and should be O ring sealed
Gloves Materials
Gloves Piercan USA make Neoprene, or Butyl
Dust filter - 0.3 micron Dust filter. HEPA Filter
0.3 micron HEPA, H13 or H14
Gas Purifier - Molecular sieves, Activated Carbon, Charcoal chamber with high efficient O2 ,H2O adsorbent One each

Shelves - Height Adjustable, Acrylic Stainless Steel shelves
Three/ Yes
Box Pressure Control -+15 mbar to -15mbar. Automatic pressure control. Yes
Box Lamp -One front mounted fluorescent lamp one inside
Yes
Antechamber Type Cylindrical, 300 mm diameter, Length 600mm (inside dimensions) Material stainless steel, thickness 2.5mm Inside surface brushed finish Sliding tray stainless steel Doors SS thickness 10mm Door lock easy to operate, spindle lock Pressure gauge, monometer: analog display Vacuum/ Refill process.

Regeneration Below 5% loss Complete automated or manual operation with foot switch Yes
Sensors Solid state oxygen sensor with 0- 1000 ppm & Solid state moisture sensor with 0-500 ppm Auto purge PLC controlled via system control panel.
PLC Program Logi Control with integrated control with external display unit 10 One Yes
Vacuum Pump 740 mm HG with fittings (Optional) High Vacuum Pump: Oil sealed vacuum pump â?? 150 lpm,Vacuum level : 5x10ï?­2mbar
Type rotary vane pump, dual stage, Oil mist filter, Oil recirculation, Automatic gas ballast control, 10 m3/h Optional facility for automatically turning off the vacuum pump when the antechamber is not in use
One
Recirculation Pump Optional Re circulating purified gases pro rata basis 20m3/
per hour
Service Support - Efficient service facilities with trained engineers at your place
warranty
One years comprehensive onsite warranty.

Box dimension 1000mm x 750mm x 750mm
Box Material Stainless steel 304 L box with mirror finish inside brushed finished outside
Acid resistant
Box panel/window Openable Front window with polycarbonate an extra coating for chemical and scratch resistance One

Feed through electrical single phase 220 V - 16 A
Attainable purity < 100ppm H2O and < 500ppm O2 at complete pressure range.
O2 = 20 l , H2O = 960 g Yes
Filtration HEPA : particles Yes
Glove Ports Glove ports, 220mm diameter and should be O ring sealed
Gloves Materials Gloves Piercan USA make Neoprene, or Butyl
Dust filter 0.3 micron Dust filter.HEPA Filter 0.3 micron HEPA, H13 or H14
Gas Purifier Molecular sieves, Activated Carbon, Charcoal chamber with high efficient O2 ,H2O adsorbent
Shelves Height Adjustable, Acrylic Stainless Steel shelves
Box Pressure Control +15 mbar to -15mbar. Automatic pressure control.
Box Lamp One front mounted fluorescent lamp one inside
Antechamber Type Cylindrical, 300 mm diameter, Length 600mm (inside dimensions) Material stainless steel, thickness 2.5mm Inside surface brushed finish Sliding tray stainless steel Doors SS thickness 10mm Door lock easy to operate, spindle lock Pressure gauge, monometer: analog display Vacuum/ Refill process.
Regeneration Below 5% loss Complete automated or manual operation with foot switch Yes
Sensors Solid state oxygen sensor with 0- 1000 ppm & Solid state moisture sensor with 0-500 ppm Auto purge PLC controlled via system control panel. Yes One Each
PLC Program Logi Control with integrated control with external display unit 10â?? One Yes
Vacuum Pump 740 mm HG with fittings (Optional) High Vacuum Pump: Oil sealed vacuum pump â?? 150 lpm,Vacuum level : 5x10 2mbar Type rotary vane pump, dual stage, Oil mist filter, Oil recirculation, Automatic gas ballast control, 10 m3/h Optional facility for automatically turning off the vacuum pump when the antechamber is not in use One
2Recirculation Pump Optional Re circulating purified gases pro rata basis 20m3/
per hour
Service Support Efficient service facilities with trained engineers at your place
warranty One years comprehensive onsite warranty.

Machine data
Packing size: 880*260*300mm (l*w*h)
Weight: 20kgs
Air power by 6-8kgs
Technical data
1.,Dry and clean air power by 6-8kg
2.,It is for 1 and 1/2¡± inch paper core and half inch paper core notch cutting used. If other size of paper core requires, new cutting mould requires.
3.,The size of the finished notches is in 4mm in width and 7mm in height.
4.,The pneumatic component is made by airtac which is with high quality assurance.
5.,Protection cover helps to avoid the accidental hurts for the operator.

1.Power single phase 220 v, 50hz, 800w.

2.Function of machine:

Specialized in rewinding the ink side in /out , wider ribbon roller to narrower ribbon rolls
It is with edge cutting function, when rerolling the defective ribbon rolls, the edge of the ribbon can be cut off to make both ends of the ribbon rolls much tidy. And this can be also used for cut the ribbon from wide one to several narrower ones.
3.Unwinding width within 240mm, length within 1000m( dia.100mm) or it can be specially designed .
4.4rewinding width from 20-240mm.

Thin Blade Slitter Scorer With Auto Feeder, Stand-Alone
Can set the qty. of paperboard, automatic stop the feeding after finishing.
Function and Features
1. Can set the qty. of paperboard, automatic stop the feeding after finishing.
2. Auto suction paper feeding, assured the safety of workers and decreased the working load.
3. Suitable to a large scale paperboard machining.
4. Three types of blade adjusted methods by manual / electric /automatic for optional .
5. Can choose adjust scorers by manual / electric for optional
6. Slitting part: adopt high quality tungsten steel blade, sharp and long work life, slice more tidy, non-pressing and non-burr.
7. Adopt 8 shafts design, two shafts in front and back of the slitter, can minimize the length of paperboard to 260mm for small paper.
8. 8 shafts with front-scoring feeding,back double rubber rollers for paper leading, running more steady.
9. Scoring part: adopt 5 points scoring, scoring distance in-phase adjust, blazonry and easy to bend the carton sheet.
10. Grinding part: adopt automatic and manual two kinds pneumatic grinding type for option, it could be grinding when working, improved work efficiency.

Technical Parameters
Model 3000
Effective width 2800mm
Speed 130m/min
Total power 7.5kw
Min. Slitter width 120mm
Min. Score-spacing 30mm
Min. Paper length 260mm
Dimensions L x W x H (mm) 3640*1740*1360
The machine size can be customized as customer requirement.Corrugated Cardboard Machine, Automatic High-Speed Folder Gluer, Manual Flute Laminator Machine Supplier China.
We are pleased to deliver waste stripping machine and sheet board pasting machine . Safe payment and on time deliver time will give you.
Welcome to consult and order.

Detail Introduction:
Automatic feeding part:
1) Machine adopts screw rod to adjust paperboard Size, only one worker can easy and fast to finish adjust.
2) Paperboard Size adjustment structure which is better adapt to different length paperboard, and paper feeding is stable and accurate.
3) Feeding Belt adopt high quality rubber seamless belt, which can bear great friction force and with long using life

Slitting part:
1) MJBD-5 type slitter score thin blade machine adopt thin blade knife to cut, the knife is sharp after deal with grinding wheel which make the paperboard edge is smooth, and with less flattening problem, this improve the quality of paperboard and will good for the paper feeding on printing machine, also can reduce waste and improve the quality of cartons.

2) Blade Grinding has two ways: grind by hand and automatic grinding, customer can judge the blade grinding time by paperboard cutting speed. Keep knife sharp will make the paperboard edge smooth and orderly.

3) Electric adjust the knife distance, pneumatic lock and fixation automatically. Manual adjust the score line width. Machine adopt independent single knife lift device which can adjust according to the quantity of paperboard you want to cut; this machine can adjust cutter size with different wear degree arbitrarily.

Feature: Paperboard feeding with rubber wheel, then slitting, then pull paperboard by rubber wheel and finally creasing score line on paperboard. For the last step of creasing can set the depth of the score line, slitting part adopt the high steel slitter knife, transmission knife drive by timing belt, customer can change knife very fast. Machine adopts pastern axes to pull paper which is much better than the normal machine.

Main parameters:
Model MJBD-5-2300
Max. Paperboard width 2300mm
Max. Slitting width 2100mm
Max. Machine speed 120 m/min
Quantity of slitter knife 6
Quantity of score wheel 10
Min. slitting width 140mm
Min. Score width 55mm
Outer diameter of slitter knife 200mm
Thickness of slitter knife 1.3mm
Power of main motor 7.5kw
Power of Blower 3.4kw
Pneumatic pressure ï¼?0.8mpa
Machine size 3000x2300x1500mm
Machine weight 1800kg
Min. paperboard width (Distance between the two rubber wheels) 320mm

Main parameters:
Model MJBD-5-2300
Max. Paperboard width 2300mm
Max. Slitting width 2100mm
Max. Machine speed 120 m/min
Quantity of slitter knife 6
Quantity of score wheel 10
Min. slitting width 140mm
Min. Score width 55mm
Outer diameter of slitter knife 200mm
Thickness of slitter knife 1.3mm
Power of main motor 7.5kw
Power of Blower 3.4kw
Pneumatic pressure 0.8mpa
Machine size 3000-2300-1500mm
Machine weight 1800kg
Min. paperboard width (Distance between the two rubber wheels) 320mm

Flexo printer slotter is an equipment to print, crease, slot the corrugated board to make boxes set by motorized system and touch screen.
This machine easy operation, flexible starting, accurate colour register.
Some parts can be flexible changed according to customer's reuqirment.

This kind of machine easy to operate and less downtime. Simple mechanism for maintenance, computer control system in capable of storing 10, 000 job order.


Export standard pack, anti-rust

Suitable for slitting paper, the slitter 1.0m---2.0m web widths. Max. Unwind o.D 1000-1500mm, web width: 1.0m-2.0m, max.Rewind od: 1000mm-1200mm, mini slitting width: 50mm

This machine can excellent end folding, center folding, miter folding, slice folding and cutting with high speed and 2 year guarantee.

320kg~380kg, wooden packing.