Mainline Floating Hose are oil hose that can adapt to the complex working conditions of the sea and the coast, and are used for ship-to-ship and ship-to-shore oil transfer loading and unloading.
Self Floating Hose
Dredging Self-floating hoses are suitable for the harshest sea or mining conditions. Equipped with PE foam body, adjusted to the bouyance of the dredged material. It's available inner diameters up to 1200mm, various lengths and pressure ranges.
Features
1. Outer cover with excellent abrasion resistance and UV protection.
2. Inner layer with excellent abrasion resistance and high quality.
3. Single foam flotation casing to prevent water absorption.
4. Wearing colored indicator layer.
5. Area above water not less than 20% of total volume.
6. Bending angle: in working condition ,the bending angle is from 0�°to 45�°.
7. Low center of gravity, strong anti-wave ability, good stability.
8. Easy installation, good adhesion, long service life.
9.The product can be customized according to clients' requirements.
Floating oil and marine hoses are designed and produced in full accordance to OCIMF standards. These porducts are also subjected to manufacturing and testing requirements dictated by ISO9000:2001 quality standards.
pay much attention to wear resistance, tensile strength, bending capacity and pressure rating for self-floating hoses.The self-floating hoses are fixed with flanges at both ends and the usual length is 11.5m.
Introduction of Self-floating Hose
Color: Black with orange rings around the hose.
Material: Rubber with thick PU foam, carbon steel flanges at both ends
Ranges: Inner diameter from 150mm to 800mm
Delivery: The floating hose inner diameter larger than 500mm always shipped by top open containers.
Tube:SBR, NR, BR.
Reinforcement:�Tire cord with helix wire and floating material layer.
Cover: SBR and CR blend.
Description:
Inner cover is excellent abrasion-resistance. It can protect the hose from the friction of depositional silt. And the colored indication layers can reflect the degree of the abrasion effectively. This can guarantees the normal use of the floating hose.
Application:
Floating high pressure rubber hose �is used with dredgers for silt/gravels conveyance. The suitable conveyance matters are usually mud, clay, fine sand, fine-mid sand and so on.
Characters:
1. Outer cover with excellent abrasion resistance and UV protection.
2. Inner cover with excellent abrasion resistance and high quality.
3. Wearing colored indicator layer.
4. Single foam flotation casing to prevent water absorption.
5. Can bear the high pressure of work.
6. The size of flange is at customers' request.
10. We can produce the hose up to ID1300mm, or as customers' requirement.
Specification:
1. Marine flexible oil hose / marine floating oil hose is designed for off shore drilling and other demanding
applications where longer lengths and fewer connections are desired.
High quality hose design for superior pressure and higher working pressure in tough environments, cover
resistance to weather,salt water, sunlight and oil.
2. OS&D design to handle petroleum products up to 50% aromatics on marine docks , ships and barges. Can
meet the longest possible service conditions.
3. Good flexibility; low temperature, ozone and ethane resistance, and easy install.
4. Diameter from 2" to 25".
Plastic strip or film wrap, plywood protect flange.
Application:Delivering industrial compressed air, has a wide range service in industry manufacture, mining , construction project and air tools.
Characteristics: flexible, aging-resistance, ozone resistance
Working temperature: -20 TO 80 ¡æ
Delivery cycle: As your order(2000 meters per day).
Type of shipping: Tianjin port or Qingdao port.
Safety factor: 1:3
Notes: Not bend over bending diameter ,not squeeze over, Avoid colliding flange surface.
Technical parameters:
Hose lining: SBR
Reinforcement layer: tire cord with helix wire
Cover rubber layer: SBR and CR blend
NOTE:We can produce any specification and property according to customers is requirements.
Packaging Details: plastic stripe in rolls or as the requirement(flexible radiator hose )
Delivery Detail: a 20ft container in 1 week
Characteristics: flexible; abrasion, aging, oil, weather, ozone resistance
Working temperature: -20 TO 120 ¡æ
Delivery cycle: As your order(2000 meters per day).
Type of shipping: Tianjin port or Qingdao port.
Safety factor: 1:3
Notes: Not bend over bending diameter ,not squeeze over, Avoid colliding flange surface.
Technical parameters:
Hose lining: NBR
Reinforcement layer: tire cord with helix wire
Cover rubber layer: CR and NBR blend
Packaging Details: plastic stripe in rolls or as the requirement(flexible radiator hose )
Delivery Detail: a 20ft container in 1 week
Application:Delivering industrial compressed air, has a wide range service in industry manufacture, mining , construction project and air tools.
Characteristics: flexible, aging-resistance, ozone resistance
Working temperature: -20 TO 80 ¡æ
Delivery cycle: As your order(2000 meters per day).
Type of shipping: Tianjin port or Qingdao port.
Safety factor: 1:3
Notes: Not bend over bending diameter ,not squeeze over, Avoid colliding flange surface.
Technical parameters:
Hose lining: SBR
Reinforcement layer: tire cord with helix wire
Cover rubber layer: SBR and CR blend
Packaging Details: plastic stripe in rolls or as the requirement(flexible radiator hose )
Delivery Detail: a 20ft container in 1 week
mainly used for mine hydraulic support, oil field development, suitable for engineering construction, lifting and transportation, metallurgy forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools and various industrial departments In the mechanized and automated hydraulic system, petroleum-based (such as mineral oil, soluble oil, hydraulic oil, fuel oil, lubricating oil) and water-based liquid (such as emulsion, oil-water emulsion, etc.) with a certain pressure (higher pressure) and temperature are transported Water), etc. and liquid transmission, the highest working pressure can reach 70-120Mpa.
High Pressure Nylon Resin Hose Description:
This product is widely used in various industries because of its high pressure resistance, high temperature resistance, wear resistance, oil resistance, various chemical reagents, anti-aging, and long service life.
1. The pressure braking system of the car;
2. The power steering system of the car;
3. Brake pipeline control system of automobile;
4. Gearbox control system;
5. Construction machinery, such as: hydraulic transmission system and hydraulic control system of excavator, loader, crane;
6. Hydraulic operation and hydraulic control system of mechanical processing equipment;
7. Tubes for high-pressure painting;
8. Pipe for liquid resin transportation.
Product Description:
Sand blasting hose is used for conveying sand or other abrasive materials engineered for sand/shot blasting purposes in
ordnance factories, steel furniture manufacturing workshops and heavy engineering industries, etc.
Tube: High quality wear-resistance rubber.
Cover: High quality rubber material is anti-aging and wear resistance.
Reinforcement: Multi-layer of spiral fabric reinforcement.
The high pressure steam hose is designed for transfer of steam in many applications, such as fire prevention, heat control and industries where steam must be transferred safely and reliably. It is resistant to bursting, cracking and crushing even under accidental exposure to flame, while being quite flexible and resistant to vibration. It consists of black, smooth, EPDM rubber especially compounded to withstand super heated steam. It is covered with smooth, black and weather abrasion and reinforced with piles of carbon steel wire.
Tube: Black, smooth, EPDM rubber especially compounded to withstand super heated steam.
Cover: Red, smooth (wrapped) EPDM rubber with excellent resistance to high temperature, weather, abrasion and aging. It is pin-pricked to prevent separation.
Reinforcement: Piles of carbon steel wires.
Temperature: -40 C to +236 C (-40 F to +456 F).
Cover: Oil, abration and weather-resistant wrapped synthetic rubber.
Performance:
1. Rubber hose pipes are used with dredgers for silt/gravels conveyance.
2. Pipe wall thickness range: from 20mm up to 50mm.
3. The suitable working temperature: from -20�°C to +80�°C.
4. Abrasion-resistant and bending â??resistant.
5. It is convenient to install, flexible to use and safe.
Dredge Slurry Suction Hose Applications:
installed between the pump and cutter of the dredger, suction the slurry. suction hose &Aamored hose with HB steel ring in, suitable for limestone, granite, coral and mineral, etc.
Automotive hydraulic hose is mainly used for mine hydraulic support, oil field development, suitable for engineering construction, lifting and transportation, metallurgy forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools and various industrial departments In the mechanized and automated hydraulic system, petroleum-based (such as mineral oil, soluble oil, hydraulic oil, fuel oil, lubricating oil) and water-based liquid (such as emulsion, oil-water emulsion, etc.) with a certain pressure (higher pressure) and temperature are transported Water), etc. and liquid transmission, the highest working pressure can reach 70-120Mpa.
There are many types of mining hoses, which refer to all rubber hoses suitable for mining in coal mines and mines. Common coal mine hoses include hydraulic support hoses, mining drainage hoses, mining spray pipes, mining exhaust hoses, coal mine hydraulic oil pipes, etc.
Drilling Hose is mainly used for mine hydraulic support, oil field development, suitable for engineering construction, lifting and transportation, metallurgy forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools and various industrial departments In the mechanized and automated hydraulic system, petroleum-based (such as mineral oil, soluble oil, hydraulic oil, fuel oil, lubricating oil) and water-based liquid (such as emulsion, oil-water emulsion, etc.) with a certain pressure (higher pressure) and temperature are transported Water), etc. and liquid transmission.
In addition,BOPcontrol hose is widely used in these fields.
SAE100 Standard Rubber Hose is mainly used for mine hydraulic support, oil field development, suitable for engineering construction, lifting and transportation, metallurgy forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools and various industrial departments In the mechanized and automated hydraulic system, petroleum-based (such as mineral oil, soluble oil, hydraulic oil, fuel oil, lubricating oil) and water-based liquid (such as emulsion, oil-water emulsion, etc.) with a certain pressure (higher pressure) and temperature are transported Water), etc. and liquid transmission, the highest working pressure resistance can reach 70-120Mpa.
ROTARY / DRILLING / CEMENT / MUD HOSE
Main Application: The rotary/drilling hose is used in oil drilling industry, bore-hole operation and washing, used on drilling rig for delivering petroleum�¬based fluid: water cement, mud .
Applicable Specs: API Spec 7K Temperature Range: -40F/ +212F -40C / +100C Construction Detail: Inner Tube:Oil and abrasion resistant synthetic rubber
Reinforcement: Multiple high tensile steel wire spirals
Cover:Oil, ozon, hydrocarbon resistant Synthetic rubber
