Kneader twin screw extruder pelletizing line advantages:
1, Fully automatic
2, Bigger capacity
3, Better mixing
4, Excellent service
5, Saving workers
6, Lower Maintainance
7, Not easy to break down
8, We can provide Formula.
Kneader twin screw extruder pelletizing line can also be used to make:
--PE/ PP/ PS / EVA+ Caco3, Talcum powder, Tio2
--PP/ PA6/ PA66/ ABS+ Ferrous powder, Magnetic powder, Ceramic powder
This company produces the SJZS series cone-shape double screw rodplastic extruding machine, has forces to squeeze out, high grade, thecompatibility broad, the life long, the shear rate small, the materialis not easy to decompose, to mix builds up the plasticizing to be good, the powder material directly takes shape and so on the characteristic, provides the direct current velocity modulation, the temperature automatic control, installment and so on vacuum exhaust. Is suitable to product the and so on tube, board, different shapematerial production.
LDPE Lump Extrusion Plastic Scrap For Sales
MATERIAL : LDPE Lump Extrusion
CATEGORY : LDPE
TYPE : Lump
GRADE : Extrusion
SPECIFICATION : "The main ingredient is LDPE and the secondary ingredient is LLDPE.
The grade is extruded flame retardant grade
Japanese customers make pellets by mixing them with pure LDPE
Ratio is 9:1
MFI 2.5"
ORIGIN : Japan
LOADING WEIGHT : 22 Tons
FOB (USD/Ton) : 250-400
Specification: "rLDPE repro Yellow pellets from post-consumer & post-industrial films.
The material is shredded and washed through a wash plant before it is processed through degassing and very fine filtration to produce high purity reprocessed resin.
toughness, strength and stretch properties. This grade is also be suitable for profile and sheet
extrusion
Packing: 1000kg bulk bag
Melt flow rate (190�?C / 2.16kg) 0.5 � 0.5
Density 0.92 � 0.015
Measured on blown film of 25 �m and BUR of 2.5 at external testing facility.
rLDPE Yellow is typically extruded at a melt temperature around 190Ã??C (min 180Ã??C, max 240Ã??C).
Mesh filters: 150 on the laser filter and 120 on the piston filters."
rLDPE repro Yellow pellets from post-consumer & post-industrial films.
The material is shredded and washed through a wash plant before it is processed through degassing and very fine filtration to produce high purity reprocessed resin.
r-LDPE yellow is a blown film grade and exhibits excellent processability and good balance of
toughness, strength and stretch properties. This grade is also be suitable for profile and sheet extrusion
Packing: 1000kg bulk bag
Melt flow rate (190�?C / 2.16kg) 0.5 �± 0.5
Density 0.92 �± 0.015
Measured on blown film of 25 �µm and BUR of 2.5 at external testing facility.
rLDPE Yellow is typically extruded at a melt temperature around 190Ã??C (min 180Ã??C, max 240Ã??C).
Mesh filters: 150 on the laser filter and 120 on the piston filters.
3741 Kneader Twin Screw Extruder Pelletizing Line Suppliers
Short on time? Let Kneader Twin Screw Extruder Pelletizing Line sellers contact you.
Drying /Fresh noodle process line/production line
Noodle machine is a kind of equipment which can extrude flour into noodles with necessary tenacity and humidity by relative rotation of flour roller. It can be divided into simple noodle machine, automatic picking noodle machine, assembly line noodle machine, automatic spaghetti machine and so on.
The automatic noodle machine is easy to operate, safe and hygienic, and suitable for eyes. Stable transmission, accurate and efficient transmission power, low noise, no vibration, superior performance and other characteristics, can be equipped noodle drying equipment.
Capacity 150kg -1300kg/hour ,big capacity can customized . Noodle shape: round ,flat from 1.5mm-10mm big to 20mm .
Can equipment noodle drying machine ,noodle packing machine .
Drying Type Garlic Peeling Machine
Garlic dividing- peeling machine is an advanced and large-scale garlic dividing -peeling equipment, which has obtained the national invention patent. No-water garlic peeling machine
The machine adopts the integrated flow mode of dividing, flaking and air stripping. The raw materials and peeled products of garlic gradually come out, with small gas consumption, high output and no noise. Besides, it is equipped with garlic waste skin extrusion molding device, which is environmentally friendly and pollution-free. The successful development of this new technology has become an important mechanical equipment in the garlic processing industry .
The remarkable features of the machine are as follows
1. Garlic does not need to be cut into roots, and the equipment will automatically peel garlic petals from the root.
2. Automatically split the garlic and peel it.
3. The feeding and conveying, flaking, continuous peeling and finished product output are all automatic.
4. The machine can automatically collect the waste garlic skin and extrude it into pieces, which is convenient for waste skin treatment.
5. The machine is clean and undamaged.
6. The machine also has the characteristics of low power consumption and no noise.
Have full-automatic / semi-automatic garlic peeling machine ,big capacity garlic peeling production line and customized design!
Twin screw extruder pelletizing line company information:
We, Nanjing GS-Plus, are professional in manufacturing plastic extruders pelletizing machine and other machines. Such as:
--Single screw extruder pelletizing line
--Twin screw extruder pelletizing line
--Kneader-force feeder-Extruder pelletizing line
--Two stage extruder pelletizing line
--Concial twin screw force feeder
--ABS/PLA filament extruder for 3D printing
--Plastic washing line ....
For All kinds of plastic& Rubber: PE, PP, PET, PVC, PC, PA, PS, ABS, PLA, TPE, TPR, TPU, TPV, EVA, EPDM...
We sincerely advise you GS-65 twin screw extruders. Our Twin screw extruder pelletizing line has good mixing, big output, high performance.
Twin screw extruder pelletizing line is very hot to customers.
1. Company information:
Nanjing GS-plus is a professional plastic extruder mamufacturing company; the main products are all kinds of Plastic/Rubber extruders, such as:
Twin screw extruder pelletizing line,
Single screw extruder pelletizing line
Two stage extruders pelletizing line
Kneader Single screw extruder pelletizing line
Kneader Twin screw extruder pelletizing line
Kneader Two stage extruders pelletizing line
Underwater cutting system
Conical twin screw force feeder
3D printer filament extruder...
2. Halogen Free Flame Retardant compounds extruder information:
HFFR compounds material mainly used for Cable or wires application.
HFFR compounds mainly produced by: Kneader--Conveyor--Conical force feeder--Twin screw extruder --Single screw extruder--Cutting system
Halogen Free Flame Retardant compounds extruder have better mixture effection, fully automatic, bigger capacity
Halogen Free Flame Retardant compounds extruder can also be used to produce: Black masterbatch, White masterbatch, Filler Masterbatch, cross-linked masterial
3. Halogen Free Flame Retardant compounds extruder advantages:
Good quality: All uses best quality parts, better mixture effect, fully automatic, bigger capacity
Good service: Both before and after-sales service
More experiences : Have sold a lot HFFR kneader extruder pelletizing lines
Kneader force feeder Single screw extruder pelletizing line for PE Filler masterbatch
Kneader Single screw extruder pelletizing line company information:
We, Nanjing GS-Plus, are professional in manufacturing plastic extruders pelletizing machine and other machines. Such as:
--Single screw extruder pelletizing line
--Twin screw extruder pelletizing line
--Kneader-force feeder-Extruder pelletizing line
--Two stage extruder pelletizing line
--Concial twin screw force feeder
--ABS/PLA filament extruder for 3D printing
--Plastic washing line ....
For All kinds of plastic& Rubber: PE, PP, PET, PVC, PC, PA, PS, ABS, PLA, TPE, TPR, TPU, TPV, EVA, EPDM...
Kneader Single screw extruder pelletizing line Description:
Today we advise you Kneader Single screw extruder pelletizing line. Kneader Single screw extruder pelletizing line is mainly produce:
--PP/PE+ Caco3, PE+Talc, PE+ Tio2, PE+ Barium Sulphate, PE+ Ceramic powder, PE+ wood/ Fibber ...
--Low smoke free halogen cable pellets
--PE Internal and External screen cable pellets
--PVC Cable pellets
--EVA foam series pellets
--PP/PE filler masterbatch, Color masterbatch, Black Masterbatch, White masterbatch, Stone paper Masterbatch, Non-woven bag masterbatch, Woven bag masterbatch
Kneader Single screw extruder pelletizing line includes:
Kneader--Conical force feeder--Single screw extruder--Cutting system
Kneader: Better Mixing performance, Fully automatic, Lower maintainance
Conical force feeder: making material into extruder easily and steady
Single screw extruder: excellent mixing, good self-cleaning, fully automatic, big capacity...
Kneader Single screw extruder pelletizing line advantages:
1, Fully automatic
2, Bigger capacity
3, Better mixing
4, Excellent service
5, Saving workers
6, Lower Maintainance
7, Not easy to break down
8, We can provide Formula.
Kneader Single screw extruder pelletizing line can also be used to make:
--PE/ PP/ PS / EVA+ Caco3, Talcum powder, Tio2
--PP/ PA6/ PA66/ ABS+ Ferrous powder, Magnetic powder, Ceramic powder
The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D.
Equipment Technical Data
Titer Range dtex 6.67-16.67
Spinning Pos. nos. 6-24
Spinning Pitch mm 700, 750
Plant Capacity TPD 15-80
Spinneret dia. mm 328, 358, 410
Spinning Mechanical Speed m/min 500-1,500
Spinning Processing Speed m/min 500-1,300
Stretching Mechanical Speed m/min 240
Stretching Processing Speed m/min 230
Total Tow Titer at Stretching dtex 600,000-3,000,000
Stuffer Box Width mm 160-410
Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101
Bale Weight kg 200-350
Application:
Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well.
Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press
Product name Original Premium Wood Pellet line EN Plus-A1 Wood Pellet Packed
Material Hard wood
Moisture 0%
Calorific Content 4000 - 4900 Kcal/Kg
Density 600-800Kgs/CBM
Length 30 - 50mm
Diameter 6 - 8mm
Packing 15kg Plastic Bag
Usage Cooking Fuel - Heating System
BRAND As Customer Requirements
Thank you for contacting us. We can offer best quality Alfalfa Pellets. Further, this is a 100% Natural Product grown and cultivated in Gujarat State of India, the nutritional specifications are subject to vary as no additions of foreign matters are made to increase/control the nutritional specification of the same.
Available In : 8 x 25 mm
We produce widest range of Alfalfa Pellets for Animal Feeding Objective. We produce 8� mm Alfalfa Pellet and 10� mm Alfalfa Pellet for Animal Feed Forage Industry
Alfalfa Pelleting Process
Generally its grown during the period of November to April Months of the year in India and the cutting process begins from the 45th� day of the plantation.
The field cut green alfalfa is spread on the agriculture land for sun drying process (which is generally called sun curing process). This is the most important phase of administration, wherein during the sun curing process the alfalfa leaves and stem has to be dried in such a manner that the leaves should not turn yellow or loose green pigments.
After 7 days of meticulous administration, the green alfalfa is converted in to hay.
The hay is loaded in trucks and transported to production side, where the first stage is to sieve (clean) the entire hay, so minor or major dust articles are removed from the same.
After cleaning process the hard stem particles are removed through a mechanical machining process and the available residue is absolutely clean and dehydrated soft leaves and soft steam.
The dehydrated alfalfa particles (leaves & steam) are grinded to a finer particles size. The overall texture of hay is now converted to Powder Form.
The powdered alfalfa is then passed through 100 degree Celsius stream for about 8 minutes, which detoxifies the alfalfa from any toxic elements and also gets cooked at a very digestible ratio.
The highly cooked alfalfa meal is then pelleted through feed extrusion methodology, during the process of pelleting again the cooked meal reaches to an extremely high temperature of 123 Degree Celsius, due mechanical thrust of the extruder in its 22 ft long barrel
The extremely hot pellets are then cooled down to a room temperature level, enabling the moisture level below 12%.
The above process produces the most advance format of Alfalfa Hay Pellet in 8 x 25 mm� and 6 x 25 mm size absolutely hygienic for Animal and Poultry feeding Purpose
Facts of Indian Alfalfa
The pricing of the alfalfa hay / pellet is totally dependent of the physical hay recovery after sun curing process, which varies 10% to 15%, which means when 100 Kgs of green alfalfa is sun dried, the hay recovery varies between 10Kgs to 15 Kgs.
The recoveries are totally dependent on the environmental factor and the water content within the stems of the alfalfa.
Countries like Canada, Northern US, New Zealand and Northern European Countries donâ??t get direct sun light (rather they get inclined sun lig
Best For : Horse
Moisture : 12%
Type Of Supplement : Equine Laminitis and Gastric Ulcer Recovery
Packaging Size : 39 Kgs
Form : Pellet
Processing Type : Extruded Pellets
Weight : 39 Kgs
Drug Composition : Nil
Equine Laminitis Feed and Gastric Ulcer Recovery Nutrition
Lamicert Feed (H -440518)
Salient Features
A truly 100% Grain Free and Grain By-product Free feed with less than 1.5% Starch
Natural Vitamin E and Selenium for antioxidant protection of Muscle Tissue
Suitable for all breed of Horses
Ideal Feed for Equine Suffering from Laminitis, Ulcer, Tying Up and Hyperactive
Balance with all essential nutrients, so no additional top up required
Daily Food for your Laminitic Horse
Feeding Quantity*: 2Kgs Morning + 1Kgs Noon + 2Kgs Evening = 5 Kgs
*Above mentioned is the minimum recommended feeding quantity which can be increase at the rate of 500g in different intervals. Nutrition being dynamic, so necessary increments are recommended on physical observation.
For the Best Results
Introduce into Horse\'s ration gradually over a week period
Avoid 100% Grain, Sugar (in any form) and Starch intake
Feed in conjunction with ample forage (Pasture, Hay and/or Chaff)
Adjust the amount fed so its appropriate for the a horse\'s body condition, stage of training, workload, pregnancy or lactation.
For Laminitis effected horses feed horses with forage less than 12% Non-Structural Carbohydrates
Never starve a horse with laminitis - this can cause hyperlipaemia (which has a high fatality rate)
Late cut, native species grass hay is likely to have lower sugar levels than early cut improved species grass hay. High fibre haylage may also be suitable.
Lucerne Leaf based nutrition appears to have a protective effect on the equine stomach and appears to reduce the incidence / expansion of gastric ulcers in horses
In instances of additional nutritional top up required HAF Nutricure Feed is recommended for horse\'s suffering from gastric ulcer.
Divide the feed into three or more smaller meals.
The feeding rates given here are based on the amount of feed needed to meet the animal\'s basic nutrient requirement.
For extensive information please contact HAF Animal Nutritionists
Additional Information:
Item Code: H-440518
Production Capacity: 450 MT per Day
Delivery Time: 18 Days minimum
Packaging Details: 39 Kgs PP Packing
PET twin screw extruder pelletizing line description:
Co-rotating Twin Screw Extruders
Parallel co-rotating twin screw extruders have excellent mixing performance, good self cleaning performance and flexible modular configuration characteristics which make them suitable for processing different types of material systems, and are extensively used in fields of polymer processing, foodstuff processing and chemical products, especially for various high molecular materials.
In most cases, parallel co-rotating twin screw extruders are used as mixing equipments. ln processing high molecular materials, the modification process and master batch preparation of polyolefin materials and engineering plastics require sufficient and intensive mixing, which differs depending on material systems, Excellent equipment performance, reasonable mixing process, advanced combination technique and rich processing experience are the key factors determining the success and efficiency of mixing.
PET twin screw extruder pelletizing line can used to suit any plastic materials according to variable screw elements combination.
According to different materials, PET twin screw extruder pelletizing line use different cutting system.
1. Air cooling die face hot cutting system:
PE, HDPE, LDPE, LLDPE, PE+ Caco3/talcum/Tio2, PVC, WPC, CPE, Low smoke zero halogen cable and wire and etc.
2. Water strand cutting system: PP, PE, PS, PA, PC, PET, ABS, HIPS, PPO, POM, color master batch and etc.
3. Water ring cutting system: PP, PE, TPU, TPR, TPE, EVA, color master batch and etc.
4. Fan cooling cutting system: PP+Caco3â?¦
5. Eccentric water-spray cutting system: chemical cross linkingâ?¦.
6. Underwater cutting system: almost all materials, like TPR, TPE, TPV, TPU, EVA, PP, PET, PE, ABS, PLA, EPS,
PET twin screw extruder pelletizing line After-sale service:
1. Our engineer can fly to your country to install machine for you, and tell your workers how to run the machine.
2. We will provide you some tools and spare parts.
3. Before shipping, we will run the machine for you to make sure everything is okay.
ABS twin screw extruder pelletizing line company information:
We, Nanjing GS-Plus, are professional in manufacturing plastic extruders pelletizing machine and other machines. Such as:
--Single screw extruder pelletizing line
--Twin screw extruder pelletizing line
--Kneader-force feeder-Extruder pelletizing line
--Two stage extruder pelletizing line
--Concial twin screw force feeder
--ABS/PLA filament extruder for 3D printing
--Plastic washing line ....
For All kinds of plastic& Rubber: PE, PP, PET, PVC, PC, PA, PS, ABS, PLA, TPE, TPR, TPU, TPV, EVA, EPDM...
ABS twin screw extruder pelletizing line can used to suit any plastic materials according to variable screw elements combination.
According to different materials, ABS twin screw extruder pelletizing line use different cutting system.
1. Air cooling die face hot cutting system:
PE, HDPE, LDPE, LLDPE, PE+ Caco3/talcum/Tio2, PVC, WPC, CPE, Low smoke zero halogen cable and wire and etc.
2. Water strand cutting system: PP, PE, PS, PA, PC, PET, ABS, HIPS, PPO, POM, color master batch and etc.
3. Water ring cutting system: PP, PE, TPU, TPR, TPE, EVA, color master batch and etc.
4. Fan cooling cutting system: PP+Caco3â?¦
5. Eccentric water-spray cutting system: chemical cross linkingâ?¦.
6. Underwater cutting system: almost all materials, like TPR, TPE, TPV, TPU, EVA, PP, PET, PE, ABS, PLA, EPS,
ABS twin screw extruder pelletizing line After-sale service:
1. Our engineer can fly to your country to install machine for you, and tell your workers how to run the machine.
2. We will provide you some tools and spare parts.
3. Before shipping, we will run the machine for you to make sure everything is okay.
PBT twin screw extruder pelletizing line company information:
We, Nanjing GS-Plus, are professional in manufacturing plastic extruders pelletizing machine and other machines. Such as:
--Single screw extruder pelletizing line
--Twin screw extruder pelletizing line
--Kneader-force feeder-Extruder pelletizing line
--Two stage extruder pelletizing line
--Concial twin screw force feeder
--ABS/PLA filament extruder for 3D printing
--Plastic washing line ....
For All kinds of plastic& Rubber: PE, PP, PET, PVC, PC, PA, PS, ABS, PLA, TPE, TPR, TPU, TPV, EVA, EPDM...
We sincerely advise you PBT twin screw extruder pelletizing line . Our PBT twin screw extruder pelletizing line has good mixing, big output, high performance.
PBT twin screw extruder pelletizing line is very hot to customers.
PBT twin screw extruder pelletizing line description:
Co-rotating Twin Screw Extruders
Parallel co-rotating twin screw extruders have excellent mixing performance, good self cleaning performance and flexible modular configuration characteristics which make them suitable for processing different types of material systems, and are extensively used in fields of polymer processing, foodstuff processing and chemical products, especially for various high molecular materials.
In most cases, parallel co-rotating twin screw extruders are used as mixing equipments. ln processing high molecular materials, the modification process and master batch preparation of polyolefin materials and engineering plastics require sufficient and intensive mixing, which differs depending on material systems, Excellent equipment performance, reasonable mixing process, advanced combination technique and rich processing experience are the key factors determining the success and efficiency of mixing.
PC ABS Alloy twin screw extruder pelletizing line :
PC ABS Alloy twin screw extruder pelletizing line mainly uses: Twin screw extruder ---Water strand Cutting system.
This PC ABS Alloy twin screw extruder pelletizing line is very popular and ecomonic.
If your pigment percent is higher in your formula, you can also use: Kneader---conveyor ---force feeder ---Twin screw extruder ---cutting system.
PC ABS Alloy twin screw extruder pelletizing line has higher quality, fully automatic and better dispersion. Most advanced company use this type.
PC ABS Alloy Formula: mainly ABS/PC+ Caco3 + additives
PC ABS Alloy twin screw extruder pelletizing line After-sale service:
1. Our engineer can fly to your country to install machine for you, and tell your workers how to run the machine.
2. We will provide you some tools and spare parts.
3. Before shipping, we will run the machine for you to make sure everything is okay.
PC ABS Alloy twin screw extruder pelletizing line Capacity: Designed as customer's request. This GS-65 type can make 300kg/h.
PC twin screw extruder pelletizing line company information:
We, Nanjing GS-Plus, are professional in manufacturing plastic extruders pelletizing machine and other machines. Such as:
--Single screw extruder pelletizing line
--Twin screw extruder pelletizing line
--Kneader-force feeder-Extruder pelletizing line
--Two stage extruder pelletizing line
--Concial twin screw force feeder
--ABS/PLA filament extruder for 3D printing
--Plastic washing line ....
For All kinds of plastic& Rubber: PE, PP, PET, PVC, PC, PA, PS, ABS, PLA, TPE, TPR, TPU, TPV, EVA, EPDM...
We sincerely advise you PC twin screw extruder pelletizing line . Our PC twin screw extruder pelletizing line has good mixing, big output, high performance.
PC twin screw extruder pelletizing line is very hot to customers.
Twin screw extruder pelletizing line
Plastic pellets extrusion machine
Plastic extruder pelletizing machine
Plastic modification twin screw extruder pelletizing equipment
PBT twin screw extruder pelletizing line
PC twin screw extruder pelletizing line
PEK twin screw extruder pelletizing line After-sale service:
1. Our engineer can fly to your country to install machine for you, and tell your workers how to run the machine.
2. We will provide you some tools and spare parts.
3. Before shipping, we will run the machine for you to make sure everything is okay.
Twin screw extruder pelletizing line
Plastic pellets extrusion machine
Plastic extruder pelletizing machine
Plastic modification twin screw extruder pelletizing equipment
PBT twin screw extruder pelletizing line
PC twin screw extruder pelletizing line
PP twin screw extruder pelletizing line
PE extruder pelletizing line
TPE TPR extruder pelletizing line
EVA compounding extruder pelletizing line
TPE TPR EVA extruder Underwater pelletizing line
PET twin screw extruder pelletizing line
ABS twin screw extruder pelletizing line
3741 Kneader Twin Screw Extruder Pelletizing Line Suppliers
Short on time? Let Kneader Twin Screw Extruder Pelletizing Line sellers contact you.
