JET-M SERIES SELF-PRIMING PUMP
JET-M series are suitable for pumping clean water.They are particularly suitable for domestic applications such as supply water from well,pool etc,the automatic distribution of water by surge tanks and pressure switch,gardening,andincreasing of water pressure.
Working conditions
Max Temperature of Fluid up to+40
Max pressure:8bar.
Max Ambient Temperature up to 40
Standard data and equipment:
Single phase 220v/50Hz,Brass or plastic impeller,carbon steel motor shaft, with thermal protector insitde.
Other model and material such as tThree phase,110v,60Hz,dual voltage, stainless shaft,etc,will be available upon request.
Monoblock pumps -
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
salient features
- High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP
- Specially designed for wide voltage operation
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life
- Back pull-out design for easy servicing and repair
- Double shielded ball bearings, so no need of external lubrication
- All Model fitted to Mechanical seal.
specification
- Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 32 Mtr.
- Maximum Flow Rate : 940 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Method of Starting : Permanent Split Capacitor (PSC)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40,
50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm)
characteristics of clear cold water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : EN-8
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Plastic
6329 Jet M Series Self Priming Pump Suppliers
Short on time? Let Jet M Series Self Priming Pump sellers contact you.
Monoblock Pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
salient features
High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
- Mechanical seal is provided as per customers requirement
Specification
- Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 65 Mtr.
- Maximum Flow Rate : 1450 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80
100 X 80 and 100 X 100 (All size in mm)
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 mÃ?/sec (max.)
- Ph Value : 6.5 to 8.5
Material of construction - motor
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminium
Monoblock pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
Salient Features
High operating efficiency resulting in lower power consumption.
- Good suction lift characteristics.
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
specification
- Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 1440 RPM
- Maximum Total Head : 12 Mtr.
- Maximum Flow Rate : 3160 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase - Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150
(All size in mm)
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminum
Applications and features:
Jet cast iron self-priming pumps combine the functional advantages of centrifugal pumps with the practical advantages of self-priming ones. With easy for assembling and using, compact
Construction, small and easy for moving, high efficiency, saving energy, no channel water before using etc. Features, it is widely used in industrial and mining enterprise, high building, washing, garden irrigation and fountains etc.
Operating conditions:
Type of liquid:clean water with no suspended solids or abrasive material
Maximum liquid temperature_50¦
Maximum suction height_10m
Maximum working pressure_10bar
Performance range
Flow rate up to 60 l/min.(3.6m3/h)
(head up to 45m
Operating limits
(suction lift up to 10m
(fluid temperature up to 60pc
(maximum ambient temperature 40pc
JET Series pump is a jet pump or a full lift self-priming pump which is consisted of centrifugal pump and jet nozzle. These series pumps possess certain flow quantity, higher head. It could lift the water to 9 meters of vacuum height.This series is suitable for using on water withdraw of household, water supply of high building, irrigation of garden and farm, etc.
Product Feature:
-Power:0.5HP,0.75HP,1HP
-Impellor : Brass
-Casting iron pump body
-PPO diffusor
-Aluminum motor housing
-Insulation class B
-protection IP 44
-stailess steel shaft &good quality bearing
-Full copper wire coil
Focus-6200 products are kind of non-hardening and self-adhesive waterproof sealing butyl tapes. The materials are weathering resistance and fully accommodate to the surface that it attached to, with effective life up to 20 years.
Main Specification
(Customized size is acceptable.)
2mm thickness * 20mm width * 20mm roll
length 2mm thickness * 30mm width *20mm roll length
Main Color - black, grey, white
Technical Data
Product Series FOCUS-6200 Series
Application Construction Industry
Elongation - 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Peel Strength 25N/cm
Tensile Strength 250KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet
Advantages
* Never hardening, maintain good waterproofing property with weathering resistance performance.
* Excellent performance in waterproofing and sealing.
* Good anti-aging performance effective life up to 20years.
* Easy to apply.
Applications
* Provide waterproof and sealing protection forsteel
structure construction.
* Provide waterproof and sealing protection for door joints, window joints,roofs
and air-ducts. Provide waterproof and sealing protection for sunshine rooms, light plate rooms and thermostatic chamber.
* Provide repair function for leaks on surfaces of metal/plastic/glass/concrete.
Structural characteristics****
A. Pump body: cast iron, with uni iso 228/1 gas threaded suction and delivery openings.
B. Motor bracket: aluminum motor bracket, reducing difficulties when starting the pump after long periods without use, due to the impeller blocking.
C. Ejector union: approved for drinking water.
D. Impeller: brass with centrifugal radial flow type
E. Motor shaft: anti-rust motor shaft
F. Mechanical seal: ceramic and graphite.
G. Motor: the pumps are coupled to an asynchronous, high efficiency toyoo induction motor of suitable size, which is quiet, closed and externally ventilated, suitable for continuous duty. Insulation class b. The thermal cutout relay motor protector is incorporated in single phase motors. Three phase motors require an adequate external motor protector, with connections according to current standards.
H. Protection: ip 44.
Structural characteristics
Unique motor design (permanent split capacitor type)
Gun metal impeller
Internally mounted mechanical seal
Low power consumption
Fitted with terminal block
Light in weight-portable
Compact mechanical design
Better aesthetics and finish
Glass fill nylon nozzle and venturi
Operating conditions
Clean water not containing abrasive particles
Liquid temperature up to 60ª c
Ambient temperature up to 40ª c
Total suction lift up to 6 meters
Motor
2-pole, single phase, 50 hz, 220-240 v with thermal overload protector
Insulation class b
Protection ip 51
Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry.
Product origin - Varanasi, Uttar Pradesh, India
Key Specifications/Special Features - 1. Copper Winding. 2. Benchmark in head and water discharge at 170 feet. 3. Full Cast Iron Body, Pump Unit and Covers for Sturdiness and Longer life. 4. Fitted with Thermal Overload Protector (T.O.P.). 5.Easy in Handling. 6. Faster Self-Priming
Minimum Order Size and Packaing details - 20 feet container
Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry.
Product origin - Varanasi, Uttar Pradesh, India
Key Specifications/Special Features - 1. Copper Winding. 2. Huge head and water discharge at 150 feet. 3. Full Cast Iron Body, Pump Unit and Covers for Sturdiness and Longer life. 4. Fitted with Thermal Overload Protector (T.O.P.). 5. Easy in Handling. 6. Faster Self-Priming
Minimum Order Size and Packaging details - 20 feet container
Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry.
Product origin - Varanasi, Uttar Pradesh, India
Key Specifications/Special Features - 1. Copper Winding. 2. Huge discharge 600 L.P.H. at 125 feet. 3. Fitted with Thermal Overload Protector (T.O.P.). 4. Easy in Handling. 5. Faster Self-Priming. 6. Cast Iron Pump Unit and Covers in Aluminium Body for Sturdiness and Longer life. 7. Super Low Voltage Performance (Lifts Water even at 150 Volts).
Minimum Order Size and Packaging details - 20 feet container
Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry.
Product origin - Varanasi, Uttar Pradesh, India
Key Specifications/Special Features - 1. Copper Winding. 2. Fitted with Thermal Overload Protector (T.O.P.). 3. Easy in Handling. 4. Faster Self-Priming. 5. Cast Iron Pump Unit and Covers in Aluminium Body for Sturdiness and Longer life. 6. Super Low Voltage Performance (Lifts Water even at 150 Volts).
Minimum Order Size and Packaging details - 20 feet container
Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry.
Product origin - Varanasi, Uttar Pradesh, India
Key Specifications/Special Features - 1. Copper Winding. 2. Huge discharge 1000 L.P.H. at 110 feet. 3. Fitted with Thermal Overload Protector (T.O.P.). 4. Easy in Handling. 5. Faster Self-Priming. 6. Cast Iron Pump Unit and Covers in Aluminium Body for Sturdiness and Longer life. 7. Super Low Voltage Performance (Lifts Water even at 150 Volts).
Minimum Order Size and Packaging details - 20 feet container
ZMD -F Series Fluorine Plastic Self-priming Magnetic Pump
Operating temperature:-20oC ~ 100oC
Flow Capacity :3.6 m3/h ~ 60m3/h
Pump Head :20 m ~ 45m
Power: 1.5-18.5kw
Product Summarize :ZMD-F Series Magnetic pump is application of modern magnetic theory which use of permanent magnets to achieve non-contact indirect transmission of a chemical process pump . When the outer magnets steel rotated by Electric Motor drive , then the inner magnets in rotoring assembly will be synchronous rotating and at sometime due to impeller installed on rotoring assembly, the impeller was rotated which can be pumping solution under magnetic field effect .there have an double isolation sets between inner magnetic rotoring assembly and outer magnets steel .so the liquids was Completely isolated without leakage. Pumping casing designed circulation pump shell. there is always have liquids in the pump chamber after infusion of liquid in first time. It is not need pour liquids into pump shell when running in second time it combined all the excellent with self-priming and without leakage functions . the general self-priming height can reach up to 2 < 4 meters.
Advantage:Without shaft seal and driving through by magnetic coupling, which avoid leakage.
Application Field :
Chemical and petrochemical industries
Acids & lyes
Metal Pickling in automotive manufacturing
Rare-earth separation
Agricultural chemicals
Nonferrous smelting process
MX Self Priming Pump
Size (discharge): 25mm to 450mm
Capacity: 3.4~ 1200 m3/hr
Suction lift: Max. 6.5m
Head: 6m ~ 135 m
Efficiency:Up to 92%
Materials:Cast iron,SS 304,SS 316,Bronze etc
MX Self Priming Pump Introduction:
MX Self priming pump made by our company is developed after our digestion, assimilation and improvement of domestic and foreign relevant technical data, which is a energy-saving kind of pump production. The pump is a kind of self-suction centrifugal pump, which has the advantages of compact structure, convenient operation, steady running, easy maintenance, high efficiency, long life, strong self-suction ability and so on. It doesn't need a foot valve on the pipeline, and just need to ensure that there is quantificational inducting oil stored in the pump case before work, so as to simplify the pipeline system and improve the working condition.
MX Self Priming Pump Features:
1. Beautiful shape and fine structure,reliable performance.
2. With strong capacity of self priming, no need to equip with flap valve.
3. Non-clog, and with powerful capacity of passing big solid..
4. Convenient for maintenance.
MX Self Priming Pump Parameter Selection Table:
MX Self Priming Pump Application:
It is used in environment protection,construction,fire protection,chemical industry,phamary,printing
and dyestuff,brewage,elctric power,electroplate,papermaking,petrol,washing for industry and mine,cool for device,etc.
It is suitable for clear water,sea water and chemical medium with acid and alkali and mushy slurry(viscosity100 centipois),consistency for solid can not exceed 30% of total medium.
When it's mounted with an arm sprayer, it can jet the water into the air to disperse into little raindrops for spraying, so it is a good tool for farm, nursery, orchard and tea garden.
It is the ideal supporting pump for transfer slurry to filter press, it could matching with filter press of different specs and models.
6329 Jet M Series Self Priming Pump Suppliers
Short on time? Let Jet M Series Self Priming Pump sellers contact you.
