Find Verified Humidity Sensor Transmitter Suppliers, Manufacturers and Wholesalers

Humidity sensor transmitter
Digital frequential ouput
Nominal frequency 6.5 khz
Std sensitivity 13 hz/%rh
Response time 0.3 s
Response time with
Optional protection : 20 s
Accurcy-interchangeability :
3 %hr de 3 a 97%rh
Hysttrtsis <1.5%rh
Measurement range 0 a 100 %hr
Operating range : -40ªc a +80ªc
Supply voltage : 4 a 12v
Ouput resistor : 0, 2 k
Output courant : 2 ma

Size 8 x 9 x 4 mm3

Humidity and temperature sensor transmitter
Digital frequential ouput
Nominal frequency 6.5 khz
Std sensitivity 13 hz/%rh
Response time 0.3 s
Response time with
Optional protection : 20 s
Accurcy-interchangeability :
3 %hr de 3 a 97%rh
Hysttrtsis <1.5%rh
Measurement range 0 a 100 %hr
Operating range : -40ªc a +80ªc
Supply voltage : 4 a 12v
Ouput resistor : 0, 2 k
Output courant : ª2 ma
Thermistance ntc 10 k a 25ªc
Operating range : -40ªc a +80ªc
Courant max : 0.3 ma

8x9x4 mm3

Humidity measuring range: 1%rh~ 99 %rh
Supply voltage vs: 10 v
Time constant (33 to 80 % rh, still air @ 63%) ta: 3.5 s
Deviation to typical response curve (10% to 90%) rh) :+/-2 %rh

A) voltage supply: 5 vdc
B) humidity measuring range: 0~100 %rh
C) response time (at 63% of signal) 33%rh to 75%rh(3): 5 s
D) suitable for small bulk assembly
E) reliability not affected by repeated condensations
F) full interchangeability. Better than +/-3%rh and +/-0.15oc
G) demonstrated reliability and long term stability
H) typical 1 to 3.6 volt dc output for 0 to 100% rh at 5 v dc supply
I) humidity calibrated within +/- 3% rh @ 55% rh
J) temperature measurement through ntc 10 kª+ +/- 1% direct output
K) ratiometric to voltage supply within the specified range

Applications:

H2,3,4 humidity and temperature transmitters are designed for environment monitoring and controlling in industrial, commercial and other buildings. These transmitters can be
used for:
Humidity and temperature monitoring of supply, exhaust
and return air(H2, duct mount)
Humidity and temperature monitering in critical
environment such as outside air(H3, outside mount)
Other applications of immersion humidity and temperature
monitoring(H4, separate probe)

Features:
High performance digital sensors and circuits, ensure
accurate measurement and temperature compensation
Good long term stability and reliability
100% field changeable sensors, no re-calibration needed
Fast response
Multiple output signals selectable
Industrial design, SS probe and sintered filter
High protection rate to IP65

Specifications:

Relative Humidity:
Sensor: Capacitance polymer
Range: 0~100%RH
Output: 4~20mA /0~10VDC/RS485
Accuracy: 2%,3%RH(25ípC,20~80%RH)
Hysteresis: <í+1%RH
Response time: <10s(25ípC,in slow air)
Drift: <í+0.5%RH/year

Temperature:
Sensor: Solid state band gap, NTC20K, PT1000/100 or Ni1000
Range: 0~50ípC/transmitter
Output: 4~20mA/0~10V/RS485, NTC20K, PT1000/100 or Ni1000
Accuracy: <í+0.5ípC@25ípC
Power: Voltage 24VAC/DCí+10% Current 24VDCí+10%
Current Output Load: 500ª+
Temperature Limit: -10~70ípC, 0~95%RH (Non condensing)
Storage Temperature: -20~80ípC
Housing: ABS Enclosure, SS probe, SS Sintered Filter
Protection: IP65


MODELS: Code Temperature Range
0 NA
1 0-50ípC
7 Other
Code Temperature Output
0 No.
1 0-10VDC
2 4-20mA
3 PT1000,í+0.2ípC@25ípC
4 PT100,í+0.2ípC@25ípC
5 NTC20K,í+0.2ípC@25ípC
6 Ni 1000,í+0.4ípC@25ípC
7 Other thermistors
8 RS485/Modbus
Code Humidity Output(0-100%RH)
1 0-10VDC
2 4-20mA
8 RS485/Modbus
Code Humidity Accuracy
2 í+2%RH
3 í+3%RH
Code Descriptions
H2 Duct mount H/T transmitter
H3 Outside Air H/T
H4 Separate Probe H/T

SENSOR OPTICAL 10-150CM ANALOG

Our most advanced intelligent spot detectors, multi-criteria/multi-sensor devices use multiple sensors to detect various conditions in an environment sensing a wider range of fires with greater accuracy.

Features & Benefits:

Multi-Criteria/Multi-Sensor smoke detection
Unique ability to detect major elements of a fire
Highest nuisance alarm immunity
Advanced algorithms interpret and respond to multiple inputs

Humidity and temperature sensor module

1. General mhtc1a humidity and temperature sensor module is designed base capacitive humiture sensor by ningbo junrong electron. This product utilizes humidity sensor capacitor and temperature sensor (lm35, america), with characteristics of stable, high accuracy, quick response, good crossing-over and it also use craftwork of smd, and so own extremely small body, stable and reliably performance. The quality guarantee time is 12 months.
2. Application electron, pharmaceutical industry, food processing, warehouses, tobacco, textile, weather, libraries and museum.
3. Shape model encapsulation shape mhtc1a humidity and temperature sensor module without shell detail to the picture
4. Model there are three models according to with or without temperature and humidity sensor. Mhc1a humidity measuring module, without temperature element mhtc1a1 temperature and humidity measuring module, with ntc resistance mhtc1a2 temperature and humidity measuring module, with lm35 temperature sensor
5. Specification
(1) power supply (vin) dc 5vf+5%
(2) electrical current 2ma (max 5ma)
(3) temperature operating range 0 ~ 70fª
(4) humidity operating range 0 ~ 100%rh (dew point)
(5) humidity measuring range 2 ~ 99%rh
(6) temperature storing range -20 ~ 85fª
(7) humidity storing range under 95%rh (no dew point)
(8) humidity measuring accuracy mhtc1a f+3%rh ( at 25fª, 60%rh )



24.5*13.5*17mm

Humidity and temperature sensor module

Specification

(1) power supply (vin) dc 5vf+5%
(2) electrical current 1.9ma (max 5ma)
(3) temperature operating range 0 ~ 50fª
(4) humidity operating range under 95%rh
(5) humidity measuring range 30 ~ 90%rh
(6) temperature storing range 0 ~ 70fª
(7) humidity storing range lower 95%rh
(8) humidity measuring accuracy f+5%rh ( at 25fª, 60%rh vin=5.0v 1.65`1.95v )
(9) typical humidity data responding to output




24.5*13.5*17mm

Honeywell BW Solo is a easy to service single-gas detector with BLE connectivity that provides real-time visibility into the status and safety of hazardous-area workers, helping companies respond faster, more knowingly and decisively to safety incidents. The first single-gas detector with the 1 Series sensor for CO, H2S and O2

Features & Benefits:
User-friendly operation,
Easy-to-read display for multiple languages,
Lightweight convenience,
Ease of maintenance,
Serviceability,
The new 1-Series sensor for enhanced reliability,
Connected Bluetooth Low Energy (BLE) capabilities.

4.Electrical characteristics
4.1 input power: 1vac (sine wave), 1khz
4.2 operating temperature range: -20=j ~ 70=j
4.3 operating humidity range: 95 %rh or less
4.5 accuracy: f+5 %rh (at 25=j, 60 %rh)
4.6 hysteresis: within 2 %rh (40 %rh ~ 80 %rh)
4.7 stability: 1 year < 2 %rh


500pcs/bag
10000pcs/carton

Economic and reasonable OEM humidity sensor module
Humidity voltage output: 1-3.6V
Low power consumption
Long stability and proven reliability not affected by repetitive condensations
Direct interface with micro-controller
RoHS Directive-compliant

Based on the rugged HUMIREL humidity sensor, GP3515 is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is required. Direct interface with a micro-controller is made possible with the moduleâ??s humidity linear voltage and direct NTC outputs. GP3515 is designed for high volume and demanding applications.


Main features
Tests under harsh chemical conditions demonstrate good operation in presence of salt atmosphere, SO 2 (0.5%), H 2 S (0.5%), O 3 ,
NOx, NO, CO, Softener, acids (H 2 SO 4 , HNO 3 , HCl), HMDS, Insecticide, Cigarette smoke .
Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS
Reliability not affected by repeated condensations
Full interchangeability. Better than +/-3%RH and +/-0.15°C
Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5 V DC supply
Humidity calibrated within +/- 3% RH @ 55% RH
Temperature measurement through NTC 10 kΩ +/- 1% direct output
Ratiometric to voltage supply within the specified range


Resistance to chemical and physical stresses
· GP3515 has circuit to protect against Electrostatic discharges upto 15 KV air discharge.
· GP3515 is protected against reverse polarity
· GP3515 is not light sensitive
· Additional tests under harsh chemical conditions demonstrate good operation in presence of salt
atmosphere, SO 2, O 3, NO, CO,CO2, Softener, Soap, acids.

-

1. General
Our humidity and temperature sensor module is designed base capacitive humidity and
temperature sensor by GP Systems. This product utilizes humidity sensor capacitor
(HS1101, France Humirel) with optional temperature sensor Pt100 , with characteristics of stable,
high accuracy, quick response, good crossing-over and it also use craftwork of SMD, and so own
extremely small body, stable and reliably performance. The quality guarantee time is 12 months.
2. Application
Electron , pharmaceutical industry, food processing, warehouses, telecom industry, AHUâ??s,
Humidity chambers etc.
3. Shape
Module (GP15AP) encapsulation shape: With or without shell detail to the picture
4. Specifications:
a) Power Supply: 5 V DC
b)Electric Current : 2 mA ( Max. 5 mA)
c) Temperature operating range: 0-90 0 C
d) Humidity operating range: 0-100% Rh (Dew point)
e) Humidity measurement range: 2- 99%Rh
f) Temperature storing range: -20 to 85 0 C
g) Humidity storage range: Under 95% Rh ( Below dew point)
h) Accuracy: 2% Rh (At25 0 C and 60%Rh)

-

MEMS technology-based ultra-precise digital sensors
Excellent long-term stability and self digital correction
RS485 communication
Free monitoring S/W for PC
Slim size with large display
Excellent long-term stability and self-digital correction

Features: Designed for industrial application. Explosion proof.
Sensor type: Capacitive Humidity Sensor & Pt 100
Measuring range: Temperature -20 .+80C / Humidity 0 ... 100%RH
Output: 4 ... 20 mA
Accuracy: Temperature 0.3 C / Humidity 2%RH
IP rating: IP66