HPMC For Construction
HPMC for construction is a non-ionic cellulose ether obtained by alkalization, etherification, neutralization and washing of cellulose.HPMC powder has good properties of thickening, dispersing, emulsifying and film-forming, and it is the first choice for the production of high-quality building material additives.
The use of hydroxypropyl methyl cellulose in construction
In construction, putty powder is used in very large quantities. About 90% of HPMC in construction is used as putty powder additives, and the rest is cement mortar and glue, used as thickening and water retention agents.
The amount of HPMC chemicals CAS9004-65-3 added to construction materials is very low, only 0.1%-1%, but it plays an irreplaceable role, which can significantly improve the water retention, fluidity and lubricity of construction materials. Building materials with added HPMC cellulose are easier to mix and use, improving the efficiency of construction workers, extending open time, improving bond strength, and forming a smooth and delicate surface coating.
- Construction HPMC powders are used in cementitious mortars and grouts to improve ease of use, adhesion and water retention.
- Hydroxypropyl methyl cellulose is also used in self-leveling compounds, tile adhesives and grouts to improve flow and workability.
-Construction HPMC is commonly used as a binder and thickener in coatings and paints.
- HPMC binders are also used in gypsum-based materials such as wallboard and ceiling tiles to improve workability and reduce water absorption.
Aggregates are mixtures of sand, gravel, crushed rock or other bulk minerals used in construction, principally as a component of concrete, and in civil engineering. At CEMENTATION we supply aggregates for a range of core applications, from fill materials to aggregates that can be used in concrete, precast concrete, asphalt and for surface dressing. Aggregate plays an important role in concrete and construction part. We supply quality material which makes durable concrete with higher compressive strength and low permeability having better finish. We can supply a wide range of coarse, fine and blended aggregates in accordance with international standards.
We acquire rock mines and stone crushing plants and enable us to fulfil contract of any size. Progressive stages if crushing and screening enable us to produce a range of aggregate sizes (06mm to 65mm)
APPLICATIONS
Road and Highway surfaces
Constructions or Civil work
Railway Ballast
To make Concrete or Asphalt
Filling
The Ground Granulated Blast Furnace Slag (GGBS/GGBFS) is a type of eco-friendly green building material and high quality secondary cementitious material for concrete and cement. It is recognized as one of the best secondary cementations material for building high durable concrete stricture in the world today! GGBS has taken over a top place of high-performance cement and concrete mineral additives with its unique characteristics of hydration, low-price raw material. GGBS is obtained by quenching molten iron blast furnace slag (a by-product of iron and steel making) in water or steam. It is then further grounded into the desired fineness in terms of the required particle size distribution. The main components of blast furnace slag are CaO (30-50%), SiO2 (28-38%), Al2O3 (8-24%), and MgO (1-18%). The other important aspect of GGBS is its superiority in concrete durability which extends the lifespan of buildings from fifty years to a hundred years.
APPLICATIONS
Soil stabilization
Mortar
Used in combination with Portland cement
Pre-cast concrete
Ready mix concrete
Specialist projects
406244 Hpmc For Construction Suppliers
Short on time? Let Hpmc For Construction sellers contact you.
Feldspar is the name given to a group of minerals distinguished by the presence of alumina and silica (SiO2) in their chemistry. This group includes aluminum silicates of soda, potassium, or lime. It is the single most abundant mineral group on Earth. They account for an estimated 60% of exposed rocks, as well as soils, clays, and other unconsolidated sediments, and are principal components in rock classification schemes. The minerals included in this group are the orthoclase, microcline and plagioclase feldspars.
APPLICATIONS
Glass making
Ceramics
Porcelain
Electrodes
Abrasion
We at CEMENTATION produce Feldspar of minerals containing Potassium and Sodium. Our supply is available in Lumps, Granules and Powder form.
Quartz is the most abundant and most common mineral on the Earth. It is found in almost every geological environment and also it is at least a component of almost every rock type. It has a hexagonal crystal structure and is made of trigonal crystallized silica. It is most varied in terms of varieties, colours and forms.
The most important distinction between the types of quartz is that one is of macro crystalline, which is individual crystal visible to the unaided eye, and the other is microcrystalline or cryptocrystalline varieties, aggregates of crystals visible only under high magnification. Chalcedony is the generic term for cryptocrystalline quartz. The transparent variety tends to be microcrystalline and the cryptocrystalline varieties are either translucent or mostly opaque.
Bauxite is a naturally occurring mineral comprising mainly of aluminium hydroxides (the trihydrate Gibbsite Al(OH)3and the AlOOH monohydrate polymorphs boehmite and diaspore), with other components in the mineral typically being silica, iron oxide, titania and aluminosilicates (clay etc). It’s a rock from Laterite soil and it is a primary Ore of Aluminium.
Properties of Bauxite include low iron content; a high Polished Stone Value (PSV) for high friction surfacing applications; a high melting point and density.
APPLICATIONS
Gunning materials
High friction surfacing
Minerals for abrasion
Refractory castables
Mouldable and Ramming Mixes
Refractory mineral blends
CEMENTATION believes in supplying quality bauxite with consistency to its customers across the world, according to their needs.
1. water-soluble, non-ionic cellulose cellulose ether
2. odorless, tasteless, non-toxic, white powder
3. dissolved in cold water, forming a clear or slightly solution
4.properties of thickening, binding, dispersing, emulsifying, film-forming, suspension, adsorption, gel, surface activity, water retention and protective colloid.
This HPMC MHPC Industry Grade Cellulose Ether has been tested strictly. In construction Mortar,
the dosage of HPMC is very low, an important additive in construction, play the role of water retention,
thickener, workability in construction mortar.
2.0 Specifications
Appearance White or off white powders
Carbonized Temperature 280-300ºC
Dry Loss, WT% =5
Methyl Content, WT% 28.0-30.0
Hydroxypropyl Content, WT% 4.0-12.0
Ph(1% solution, 25ºC) 7.0±1.0
Gel Temperature ºC 58-65
Fineness, mesh 80-120
Viscosity (2% solution, 20ºC,mpa.s) 400-200000
3.0 Application Range
Construction Mortar : Masonry Mortar , Tile Glue Mortar, Tile Bond, Tile Adhesive, Grouts Mortar
Wall Putty Industry : Skim Coat, Gypsum Plaster, Wall Leveling Plaster
Flooring : Self Leveling Mortar, Floor Leveling Mortar
4.0 HPMC Properties
Increases the water retention of construction Grouts Mortar
Improves workability of construction Grouts Mortar
Improves bonding of construction Grouts Mortar
Increases sag resistance of construction Grouts Mortar
5.0 Service
1. Professional Construction Grade Cellulose Ether Supplier
2. Construction Chemicals and Technology Solutions Provider
3. Free formulations for construction grouts mortar
6.0 Advantages
1. Provide High Quality Products
2. Professional Technology Service Sale Team
3. Convenient Transportation, near to QINGDAO and SHANGHAI Port
4. Long years Exporting Experience
7.0 Package & Storage & Transportation
A. Standard Packing : in 25kg pp bags inner with pe bags
B. Big bags or other special packages as required
C. Store in cool and dry environment, keep away from moisture
D. Shelf Life :12 months
E. Transport as non-danger goods
Rockwool, also known as mineral wool, is an insulation material made from natural stone or mineral fibers. The density of Rockwool refers to the mass of the material per unit volume, and it is commonly expressed in kilograms per cubic meter (kg/m�³) or pounds per cubic foot (lb/ft�³).
The density of Rockwool can vary depending on the specific product and its intended application. Common densities for Rockwool insulation products range from approximately 40 kg/m�³ (2.5 lb/ft�³) to 200 kg/m�³ (12.5 lb/ft�³) or more. The choice of density often depends on factors such as thermal performance requirements, structural support needs, and the specific application of the insulation.
GFRP rebar is made of high-strength glass fibers along with a highly durable resin. These
products are developed as a superior alternative to steel in concrete reinforcement. It is
widely used to reinforcing concrete in applications where it is exposed to water, salt water
or chemical environments
- Typical Advantages:
- Non-Corrosive â?? It will not corrode when exposed to a wide variety of corrosive substances
- including chlorides
- High Strength-to-Weight Ratio â?? best reinforcement for weight sensitive reinforcement
- Non-Conductiveâ?? It is excellent electrical and thermal insulator
- Excellent Fatigue Resistanceâ?? performs best in cyclic loading solutions
- Impact Resistanceâ?? It resists sudden and severe point loading
- Magnetic Resistance â?? completely non-effective to electromagnetic fields; excellent for
use in electromagnetic testing facilities
- Light Weight easy to transport, no need for lifting equipment, easy to handle
Essential details
Place of Origin:
AUSTRIA
Brand Name:
contact to supplier
Model Number:
contact to supplier
Packaging & delivery
Lead time:
Quantity(metric tons) 1 - 20 >20
Lead time (days) 5 To be negotiated
