Item Standard Result
Cu% 99.9 min 99.99
Sb% 0.002max 0.001
As % 0.002max 0.0006
Fe% 0.005 max 0.0012
Ni% 0.002 max 0.0008
Pb % 0.005max 0.0025
Sn% 0.002max 0.0007
S% 0.005max 0.003
O% 0.002max 0.001
Zn% 0.005max 0.002
P% 0.001max 0.0002
ELEMENTS VALUE RESULT
Copper Cu 99.95% Min.
Cobalt Co 0.001% Max.
carbon C 0.003% max
Iron Fe 0.005% Max.
phosphorus P 0.01% Max.
sulphur S 0.01% Max.
Znic Z 0.03% Max.
Minimum Order: 25 MT
Capacity: 10,000 mt
Location: Eastern Europe
Payment terms: Bank transfer only.
Supply Ability
Supply Ability
30000 Metric Ton/Metric Tons per Month
ADC-8C multielement analyzer
Applications:
It is used to analyze various metal elements in ore or alloy with simple operation and low cost. It is widely applied for zinc ore, lead ore, manganese ore, copper ore, iron ore, chrome ore and alloy analysis etc.
Main operation procedure:
6. Crush ores or alloy
7. Weigh by electronic balance
8. Dissolve and dilute ores or alloy powder
9. Put powder into equipment and get the result
10. Print measuring result
Main features:
Build-in 60 scaling grades on equipment channel, which can be automatically exchanged independently and exactly instead of manual adjustment.
Automatic calibration to different light source, liquor, colorimetric wares and guarantee the measuring accuracy.
Each channel sets several regression equation curves and flex control system of double communication port, it takes 6 channels as benchmark, can not only cut to 3 channels, but also can expand to 9, 12, 15, 18 channels, which is easy to plus or minus elements.
Be online with C and S, then you can control result display, print, storage, inquiry timely by one PC.
The precision is coincided with GB (native standard), can save large amount manpower, materials and energy for customers.
Main parameters:
Power voltage: 220V¨ª+10% 50HZ, electricity consumption: ¨ª_50W
Colorimetric time: 5 seconds
Measuring range: 0-1,999 absorbency value, 0-99.99% concentration value.
Measuring elements: Si, Mn, P, Cu, Ni, Cr, Mo, rare-earth, Mg, Ti, Zn, Al, Pb, and Fe etc.
Precision: confirm to GB/T223.3-5-88 standard.
Main features:
Complete functions with LED display, print the result directly. It is easy to operate and suitable for multi-elements analysis in materials like various metals, alloy and ores.
Dissolve the sample outside the equipment without pipe electromagnetic valve corruption and aging, then the operation is more convenient, more stable function and higher reliability.
Short colorimetric time and fast operation, it takes 8~15min to analyze one element.
Traditional and reliable ore (alloy) analysis method.
Its non-standard configuration: crusher, electronic balance and chemical reagent etc.
We (Excellent Integrated System LIMITED) sell TOSHIBA all series electronic components(semicondutor). We are the stocking distributor of TOSHIBA electronic components semiconductor.
Description:
Gl mini span adss fiber optic cable is idea for installation in distribution as well as transmission environments, even when live -line installations are required as its name indicates, there is no support or messenger wire required, so installation is achieved in a single pass.
Application: self-support aerial installation
Characteristic:
1.Suitable for use on distribution and high
Voltage transmission lines with mini spans or
Self supporting installation for
Telecommunication .
2. Track -resistant outer jacket available for
The high voltage line where space potentials
Up to 35kv.
3. Gel-filled buffer tubes are s-z stranded
4. Instead of aramid yarn or glass yarn, there is no
Support or messenger wire required. Aramid yarn
Is used as the strength member to assure the tensile
And strain performance
5. For mini span (100-200) the fiber counts
From 4-24 fibers
Note:
1. Only a part of adss cables are listed in the table. More can be produce as required .
2. Cables can be supplied with a range of single mode or multimode fibers.
3. Specially designed cable structure is available on request.
11 Hjr 3Ff S Z 5Vdc Instead Njr 3Ff Sc Ni 5 Ni11 Suppliers
Short on time? Let Hjr 3Ff S Z 5Vdc Instead Njr 3Ff Sc Ni 5 Ni11 sellers contact you.
Description:
Mini span adss fiber optic cable is idea for installation in distribution as well as transmission environments, even when live -line installations are required as its name indicates, there is no support or messenger wire required, so installation is achieved in a single pass.
Application: self-support aerial installation
Characteristic:
1.Suitable for use on distribution and high voltage transmission lines with mini spans or self supporting installation for telecommunication .
2. Track -resistant outer jacket available for the high voltage line where space potentials up to 35kv.
3. Gel-filled buffer tubes are s-z stranded
4. Instead of aramid yarn or glass yarn, there is no support or messenger wire required. Aramid yarn
Is used as the strength member to assure the tensile and strain performance
5. For mini span (100-150) the fiber counts from 2-72 fibers
Note:
1. Only a part of adss cables are listed in the table. More can be produce as required .
2. Cables can be supplied with a range of single mode or multimode fibers.
3. Specially designed cable structure is available on request.
1.Motion controller use computer+,WINDOWS operating system, failure alarming menu
2.Available by manual teaching programming which is easy and quick
3.Integral steel moving platform, to ensure the smooth running
4.X, Y, Z three-axis motion
5.Servo motor+ball screw drive
6.Run precision of 0.02mm,automatically eliminate difference
7.Nozzles automatic cleaning device
8.Special aluminum alloy rail and stainless steel conveyor chain
9.Independent material container
10.Equip with gas collection, exhausting devices
11.SMEMA port to connect with other devices
Technical parameter
Model
CWCC-3L
External Size L*W *H
1010*1360*1675mm(L*W*H)
Weight
500KG
Control Mode
IPC+control card
Software
CW software+Windows
Programming
Teaching box
Axis
Xã??Yã??Z
Drive
Servo motor +ball screw
Max. move speed
800mm/s
Coating scope
L580*W580mm
Max .PCB height
up 90 down 90mm
Rotation angle
±180º
Positioning accuracy
0.02mm
Repeat accuracy
0.02mm
Conveyor quantity
1
Width adjusting mode
auto
Width adjust speed
250mm/min
Conveyor height
900±20mm
Conveyor speed
2-5mm/min
Conveyor direction
L-R(R-L optional)
PCB edge space
â?§5mm
Conveyor motor power
DC24V 69W
Communication port
SMEMA port
Nozzle quantity
2 sets
Nozzle type
pin type spray nozzle,film nozzle
Tilt angle
0~35º
Single coating width
2-30mm(According to the selected value)
Material volume
5L
Draft capacity
15 m3 /min
Power supply
AC220V 50/60Hz
Total power
2.2KW
Pressure
0.4Mpa
Programming panel
Standard
Material Detection
Standard
Camera location
Standard
Clamp device
Standard
Bar code
Standard
UPS
Standard
Waste recycling
Standard
Nozzle option and function:
Tilt for dispensing
Tilt for coating
Can equipped with 2 sets of nozzle.
It can choose 3 from 5 that SA-W5, SA-W3,DJ-01, LA-W30, SC-W10
2 of them can be 35° tilt to achieve 5 axis working. The nozzle can down 75mm, and 3 nozzles can switch crbitrarily. The whole holder can be 360° rotation which can make high efficiency accuracy no-deadcorner.
Selective Coating Machine, CWCC-6
Application:
PCBA surface coating, dam process, coating solder mask, DIP components fixing.
Featuresï¼?
1.Motion controller use computer+,WINDOWS operating system, failure alarming menu
2.Available by manual teaching programming which is easy and quick
3.Integral steel moving platform, to ensure the smooth running
4.X, Y, Z three-axis motion
5.Servo motor+ball screw drive
6.Run precision of 0.02mm,automatically eliminate difference
7.Nozzles automatic cleaning device
8.Special aluminum alloy rail and stainless steel conveyor chain
9.Independent material container
10.Equip with gas collection, exhausting devices
11.SMEMA port to connect with other devices
Technical parameter
Model
CWCC-6
External Size L*W *H
900*1280*1630mm(L*W*H)
Weight
700KG
Control Mode
IPC+control card
Software
CW software+Windows
Programming
Teaching box
Axis
Xã??Yã??Z
Drive
Servo motor +ball screw
Max. move speed
1000mm/s
Coating scope
L460*W460mm
Max .PCB height
up 100 down 100mm
Rotation angle
±180º
Positioning accuracy
0.02mm
Repeat accuracy
0.02mm
Conveyor quantity
1
Width adjusting mode
auto
Width adjust speed
250mm/min
Conveyor height
900±20mm
Conveyor speed
2-5mm/min
Conveyor direction
L-R(R-L optional)
PCB edge space
â?§3mm
Conveyor motor power
DC24V 69W
Communication port
SMEMA port
Nozzle quantity
2 sets
Nozzle type
pin type spray nozzle,film nozzle
Tilt angle
0~35º
Single coating width
2~10/2-30mm(According to the selected value)
Material volume
5L
Draft capacity
15 m3 /min
Power supply
AC220V 50/60Hz
Total power
2.6KW
Pressure
0.6Mpa
Programming panel
Standard
Material Detection
Standard
Camera location
Standard
Clamp device
Standard
Bar code
Standard
UPS
Standard
Waste recycling
Standard
Nozzle option and function:
Tilt for dispensing
Tilt for coating
Can equipped with 2 sets of nozzle.
It can choose 3 from 5 that SA-W5, SA-W3,DJ-01, LA-W30, SC-W10
2 of them can be 35° tilt to achieve 5 axis working. The nozzle can down 75mm, and 3 nozzles can switch crbitrarily. The whole holder can be 360° rotation which can make high efficiency accuracy no-deadcorner.
1.Motion controller use computer+,WINDOWS operating system, failure alarming menu
2.Available by manual teaching programming which is easy and quick
3.Integral steel moving platform, to ensure the smooth running
4.X, Y, Z three-axis motion
5.Servo motor+ball screw drive
6.Run precision of 0.02mm,automatically eliminate difference
7.Nozzles automatic cleaning device
8.Special aluminum alloy rail and stainless steel conveyor chain
9.Independent material container
10.Equip with gas collection, exhausting devices
11.SMEMA port to connect with other devices
Technical parameter
Model
CWCC-6
External Size L*W *H
900*1280*1630mm(L*W*H)
Weight
700KG
Control Mode
IPC+control card
Software
CW software+Windows
Programming
Teaching box
Axis
Xã??Yã??Z
Drive
Servo motor +ball screw
Max. move speed
1000mm/s
Coating scope
L460*W460mm
Max .PCB height
up 100 down 100mm
Rotation angle
±180º
Positioning accuracy
0.02mm
Repeat accuracy
0.02mm
Conveyor quantity
1
Width adjusting mode
auto
Width adjust speed
250mm/min
Conveyor height
900±20mm
Conveyor speed
2-5mm/min
Conveyor direction
L-R(R-L optional)
PCB edge space
â?§3mm
Conveyor motor power
DC24V 69W
Communication port
SMEMA port
Nozzle quantity
2 sets
Nozzle type
pin type spray nozzle,film nozzle
Tilt angle
0~35º
Single coating width
2~10/2-30mm(According to the selected value)
Material volume
5L
Draft capacity
15 m3 /min
Power supply
AC220V 50/60Hz
Total power
2.6KW
Pressure
0.6Mpa
Programming panel
Standard
Material Detection
Standard
Camera location
Standard
Clamp device
Standard
Bar code
Standard
UPS
Standard
Waste recycling
Standard
Nozzle option and function:
Tilt for dispensing
Tilt for coating
Can equipped with 2 sets of nozzle.
It can choose 3 from 5 that SA-W5, SA-W3,DJ-01, LA-W30, SC-W10
2 of them can be 35° tilt to achieve 5 axis working. The nozzle can down 75mm, and 3 nozzles can switch crbitrarily. The whole holder can be 360° rotation which can make high efficiency accuracy no-deadcorner.
MODULE KN831E Parichha power
YOYIK, with advanced technical equipment and rich industry experience, provides all-round solutions for technical transformation and overhaul projects in thermal power, hydropower, steel and other fields. From equipment selection to installation and commissioning, to after-sales service, every link reflects the company's professionalism and meticulousness. At the same time, as a multi-brand agent, YOYIK ensures that every product is authentic and reliable to meet the personalized needs of different customers.
Yoyik can offer many spare parts for power plants as below:
#DF-MODULE KN831E Parichha power-DF
Control power supply PSMB-7-7-48V/240W
board M8.530.016 V2_3
AC contactor CJX2-8011
THERMORESISTANCE S.STEEL TUBE DIA. 6.3MM, HEAD: SIMPLE ROUND 200MM.
temperature controller k type thermocouple WRNK2-335
LVDT Sensor TD-1-0150-10-01-01
displacement measurement transducer LVDT TDZ-1-H 0-300
servo card Repair SFW-S(B)
Thermal expansion sensor TD-2-A2
Magnetoresistive probe Z5-04-75-3000
magnetic speed pickup CS-1 L=90
Anti interference LVDT Sensor TD-1K-100-15
LVDT transmitter XCBSQ-04/200-02-01
RTD WZPDA2.5X12X250-3G
Oxygen sensor OX-3
Bolt electric heating rod ZJ-22-18
Card for controller B-A/D U13
LVDT transmitter XCBSQ-01/400-01-02
displacement sensor (lvdt) for rsv ZDET-150A
magnetic pickup rpm sensor CS-1 G-100-05-01
CONTROLLER PK-3D-W-415V
magnetic pickup speedometer CS-1 G-100-02-1
AUXILIARY RELAY JZS-7/2403 (XJZS-2403)
LVDT Sensor 4000TDGN-100-01-01
Pressure switch PS 1060
Module MMS6210
speed sensor CS-1 G-075-02-01
DC AUXILIARY RELAY JT3-11/5, 220 VDC
Proximity switch E2E-X7D2-N-Z
Bolt electric heating rod ZJ-20-T12(A)
Bolt heater DC120-200V ZJ16.3-450R
LVDT transmitter XCBSQ-01/200-01-11
gauge pressure transducer 6NN-KK5-NI-CIA
LEVEL CONTROLLER NRG 16-11
Power module redundancy module 6EP1961-3BA20
Steam Turbine Speed Probe ZS-04-150-5000
MODULE KN831E Parichha power
MY-DFYL-2025-3-6
11 Hjr 3Ff S Z 5Vdc Instead Njr 3Ff Sc Ni 5 Ni11 Suppliers
Short on time? Let Hjr 3Ff S Z 5Vdc Instead Njr 3Ff Sc Ni 5 Ni11 sellers contact you.
