HG-M40/HG-L40 Series Ultrasonic Sensor Module for a Robot Features
* Object Detector and Range Finder
* Medium Range
* Various Directivities
* Low 'Click Noise'
* Indoor Environment
* Minimum Dead Zone
* Real-Time Signal(5V TTL)
* Operates at 40kHz
* 3 types of Modules
- Transceiver(HG-M40D)
- Transmitter(HG-M40T)
- Receiver(HG-M40R)
HG-M40/HG-L40 Series Ultrasonic Sensor Module for a Robot Specifications
* Frequency: 40 +/- 2 KHz
* Input Pulse: TTL or Pulse (2 V ~ 10 V)
* Repetition Rate of Input Pulse: 10 Hz ~ 30 Hz
* Input DC Power (Vdc): 10 V ~ 16 V
* Driving Voltage for Sensor: 60~70 Vpp at 12V Vdc
* Output Signal: 5 V TTL
* Minimum Dead Zone
* 3 types of Modules
HG-P40C Ultrasonic Proximity Sensor & Module Description
* Using only a single transceiver sensor unit for transmit and receive signals.
* Convenient for distance measuring and object detection.
* Two types of transmit mode for convenience.
- Free Run : With a power supply, sensor transmits trigger and burst signal itself - for basic application
- External Trigger : External system(controller or processor circuit) controls the trigger signals - for advance application(distance measure)
* Two types of input power - Low(5V) for processor circuit usage and High(12V) for controllers.
* Four different output signal (simultaneously).
- Real time ultrasonic wave amplified from actually received ultrasonic. (for sound pressure measuring)
- Real time TTL level square signal(Square Wave) of detection signal. (for robots)
- Distance pulse width signal which is proportional to the nearest object from the sensor. (for robots and distance measuring)
- Proximity output signal(10mA current) within the preset range(0.5~4.5m) (for industrial use)
- Preset range is adjustable from 0.5 to 4.5 m. (factory distance preset available for volume orders)
* High performance ASIC Chip for stable transmission and sensitive reception. (Max. approx. 4,000 times amplification)
HG-P40C Ultrasonic Proximity Sensor & Module Features
* Multi functional transceiver model
* Two types of transmit modes (Free Run / External Trigger)
* Power Supply (Low : 5V / High : 6~16V)
* 4 different output signals (simultaneously)
- Real time received and amplified ultrasonic wave
- Real time TTL square signal
- Distance pulse width signal
- Detecting objects within the preset range(proximity)
* High performance ASIC Chip
HG-P40C Ultrasonic Proximity Sensor & Module Specification
* Input DC: Low : 5V / High : 6~16V
* Current consumption (when 12V is used)
- 12mA (Standby Mode)
- 18mA (When an object is detected within the range)
- 28mA (Proximity signal 10mA deducted)
* Distance Range (at flat plate)
- 0.4~3m (when 5V is used)
- 0.4~6m (when 12V±3V is used)
* Size
Module : 20x36x20(mm)
Sensor : Φ16
HG-P40C Ultrasonic Proximity Sensor & Module Description
* Using only a single transceiver sensor unit for transmit and receive signals.
* Convenient for distance measuring and object detection.
* Two types of transmit mode for convenience.
- Free Run : With a power supply, sensor transmits trigger and burst signal itself - for basic application
- External Trigger : External system(controller or processor circuit) controls the trigger signals - for advance application(distance measure)
* Two types of input power - Low(5V) for processor circuit usage and High(12V) for controllers.
* Four different output signal (simultaneously).
- Real time ultrasonic wave amplified from actually received ultrasonic. (for sound pressure measuring)
- Real time TTL level square signal(Square Wave) of detection signal. (for robots)
- Distance pulse width signal which is proportional to the nearest object from the sensor. (for robots and distance measuring)
- Proximity output signal(10mA current) within the preset range(0.5~4.5m) (for industrial use)
- Preset range is adjustable from 0.5 to 4.5 m. (factory distance preset available for volume orders)
* High performance ASIC Chip for stable transmission and sensitive reception. (Max. approx. 4,000 times amplification)
HG-P40C Ultrasonic Proximity Sensor & Module Features
* Multi functional transceiver model
* Two types of transmit modes (Free Run / External Trigger)
* Power Supply (Low : 5V / High : 6~16V)
* 4 different output signals (simultaneously)
- Real time received and amplified ultrasonic wave
- Real time TTL square signal
- Distance pulse width signal
- Detecting objects within the preset range(proximity)
* High performance ASIC Chip
HG-P40C Ultrasonic Proximity Sensor & Module Specification
* Input DC: Low : 5V / High : 6~16V
* Current consumption (when 12V is used)
- 12mA (Standby Mode)
- 18mA (When an object is detected within the range)
- 28mA (Proximity signal 10mA deducted)
* Distance Range (at flat plate)
- 0.4~3m (when 5V is used)
- 0.4~6m (when 12V±3V is used)
* Size
Module : 20x36x20(mm)
Sensor : Φ16
HG-C40U Ultrasonic Range Finder Sensor & Module Description
* ATmega 8 MCU
* Measures distance from the obstacle and sends the data using UART communication.
* Within 5mm Resolution
* Optional two transmitting mode for various use.
- Free Run : With a power supply, sensor transmits trigger and burst signal by itself (for basic application)
- External Trigger : External system(controller or processor circuit) controls the trigger signals - for advance application
* Two types of input power - Low(5V) for processor circuit usage and High (12V) for controllers. * Factory Default : 12V
* Various Setting Option
- Free Run / UART Trigger / External Trigger setting
- Ring buffer use or not use setting
- UART communication baudrate setting
- Free Run Trigger interval
* Output Signal
- Distance Data using UART(ASCII, mm)
- Real time ultrasonic wave amplified from actually received ultrasonic.
- Real time TTL level square signal(Square Wave) of detection signal.
* High performance ASIC Chip for stable transmission and sensitive reception.
* Sensor to PC communication using 'Interface Board' (RS232, Power regulator)
* Data display using monitor program from PC (Hyperterminal available)
HG-C40U Ultrasonic Range Finder Sensor & Module Specification
* Communication: UART(TTL)
* Input Voltage 5V, 12V(default)
* Current Consumption: 20mA(Typ) ~ 30mA(Max)
* Frequency: 40kHz
* Max. distance: 3.5m (at 5V); 5m (at 12V)
* Min. distance: 2cm
* Resolution: 5mm
HG-B40A/HG-B40C Combi ASIC Ultrasonic Sensor & Module Features
* Low-power, high-sensitivity module.
* Choose from a wide variety of input/output Mode.
* Auto sensitivity control function as a distance proportional to the distance error captain.
* The same standards as existing foreign products and mutually replaceable.
HG-B40A/HG-B40C Combi ASIC Ultrasonic Sensor & Module Specification
* Receiver Output Signal:
Analog: ±2 V max at 2.5 V Base Line
Real Time Pulse: 4~5 V TTL, All the objects detected
Distance Pulse: 4~5 V TTL Only the nearest Object
* Choose from a wide variety of input/output Mode.
* Detecting Range:
0~3 m (Conventional, HG-B40C) (at 5Vdc)
0~6 m (Conventional, HG-B40C) (12 Vdc)
b0~3 m (Anistropic, HG-B40A) (12 Vdc)
379 Hg M40 Hg L40 Series Ultrasonic Sensor Module Suppliers
Short on time? Let Hg M40 Hg L40 Series Ultrasonic Sensor Module sellers contact you.
HG-DMSI-02 Distance Measure Sensor Interface Board Features
* Size : 80 x 80 mm
* Channel : Connect up to 8 Ultrasonic Sensors
(HG-B40A, HG-B40C Conly)
* Power : DC 12V(DC Jack connector 1ea, 2pin connector 1ea),
DC 5V(2pin connector 1ea)
* Output : RS232(9-pin DSUB 1, 3-pin connector 1), UART(3-pin connector 1)
HG-DMSI-02 Distance Measure Sensor Interface Board Communication Setting
* Default Baudrate : 57600 bps * (LED ON is showing current Baudrate )
1: 9600, 2:19200, 3:38400, 4:57600
* Data bit : 8 bit
* Stop bit : 1 bit
* Parity bit : None
* Hardware Flow control : None
ToughSonic 14 Level & Distance Sensor
PC or Button Setup, Waterproof, Two Selectable Outputs
TSPC sensors and SenixVIEW software put the power of ultrasonics in your hands yet retain the simplicity of push-button TEACH setup. You can quickly adjust, optimize, save and clone your applications without calibration!
ToughSonic sensors contain a rugged transducer potted in a stainless steel housing for long life.
Outputs respond to measured distance and non-contact technology means nothing touches your materials.
TSPC-30S1 Series Ultrasonic Level & Distance Sensor Features
Distance Measurements
* Long range, short dead band
* Unaffected by optical factors like color and transparency
* PC or button "teachable" setup
* Narrow beam with adjustments to optimize performance
* Temperature compensated
Packaging & Performance
* Quick mounting
* Durable sealed housing for wet or dirty applications
* Short & overload protected I/O
* Multi-sensor synchronization
* Adjustable sensitivity
* Rear status indicators (3)
Free Functionality using adjustable interface features like switch hysteresis and time delays to build complete solutions such as pump or material flow controllers. Save cost by eliminating PLCs, delay circuits and time delay relays!
This ultrasonic sensor provides a easy method for distance measurement, with a 30cm to 3.5m detecting range, it is widely used in fields like industrial, auto, teaching and robots, etc.
Descriptions:
4\ resolution: 1 cm;
5\ ultrasonic frequency: 40khz;
6\ dimension: 1.6 x 1.1 x 0.9 inch / 4 x 2.8 x 2.3 cm (pins not included);
Box dimension - 1000mm x 750mm x 750mm
Box Material - Stainless steel 304 L box with mirror finish inside brushed finished outside
Acid resistant
Box panel/window Openable Front window with polycarbonate an extra coating for chemical and scratch resistance One
Feed through electrical single phase 220 V - 16 A
Attainable purity < 100ppm H2O and < 500ppm O2 at complete pressure range.
O2 = 20 l , H2O = 960 g
Filtration HEPA : particles
Glove Ports - Glove ports, 220mm diameter and should be O ring sealed
Gloves Materials
Gloves Piercan USA make Neoprene, or Butyl
Dust filter - 0.3 micron Dust filter. HEPA Filter
0.3 micron HEPA, H13 or H14
Gas Purifier - Molecular sieves, Activated Carbon, Charcoal chamber with high efficient O2 ,H2O adsorbent One each
Shelves - Height Adjustable, Acrylic Stainless Steel shelves
Three/ Yes
Box Pressure Control -+15 mbar to -15mbar. Automatic pressure control. Yes
Box Lamp -One front mounted fluorescent lamp one inside
Yes
Antechamber Type Cylindrical, 300 mm diameter, Length 600mm (inside dimensions) Material stainless steel, thickness 2.5mm Inside surface brushed finish Sliding tray stainless steel Doors SS thickness 10mm Door lock easy to operate, spindle lock Pressure gauge, monometer: analog display Vacuum/ Refill process.
Regeneration Below 5% loss Complete automated or manual operation with foot switch Yes
Sensors Solid state oxygen sensor with 0- 1000 ppm & Solid state moisture sensor with 0-500 ppm Auto purge PLC controlled via system control panel.
PLC Program Logi Control with integrated control with external display unit 10 One Yes
Vacuum Pump 740 mm HG with fittings (Optional) High Vacuum Pump: Oil sealed vacuum pump â?? 150 lpm,Vacuum level : 5x10ï?Â2mbar
Type rotary vane pump, dual stage, Oil mist filter, Oil recirculation, Automatic gas ballast control, 10 m3/h Optional facility for automatically turning off the vacuum pump when the antechamber is not in use
One
Recirculation Pump Optional Re circulating purified gases pro rata basis 20m3/
per hour
Service Support - Efficient service facilities with trained engineers at your place
warranty
One years comprehensive onsite warranty.
Box dimension 1000mm x 750mm x 750mm
Box Material Stainless steel 304 L box with mirror finish inside brushed finished outside
Acid resistant
Box panel/window Openable Front window with polycarbonate an extra coating for chemical and scratch resistance One
Feed through electrical single phase 220 V - 16 A
Attainable purity < 100ppm H2O and < 500ppm O2 at complete pressure range.
O2 = 20 l , H2O = 960 g Yes
Filtration HEPA : particles Yes
Glove Ports Glove ports, 220mm diameter and should be O ring sealed
Gloves Materials Gloves Piercan USA make Neoprene, or Butyl
Dust filter 0.3 micron Dust filter.HEPA Filter 0.3 micron HEPA, H13 or H14
Gas Purifier Molecular sieves, Activated Carbon, Charcoal chamber with high efficient O2 ,H2O adsorbent
Shelves Height Adjustable, Acrylic Stainless Steel shelves
Box Pressure Control +15 mbar to -15mbar. Automatic pressure control.
Box Lamp One front mounted fluorescent lamp one inside
Antechamber Type Cylindrical, 300 mm diameter, Length 600mm (inside dimensions) Material stainless steel, thickness 2.5mm Inside surface brushed finish Sliding tray stainless steel Doors SS thickness 10mm Door lock easy to operate, spindle lock Pressure gauge, monometer: analog display Vacuum/ Refill process.
Regeneration Below 5% loss Complete automated or manual operation with foot switch Yes
Sensors Solid state oxygen sensor with 0- 1000 ppm & Solid state moisture sensor with 0-500 ppm Auto purge PLC controlled via system control panel. Yes One Each
PLC Program Logi Control with integrated control with external display unit 10â?? One Yes
Vacuum Pump 740 mm HG with fittings (Optional) High Vacuum Pump: Oil sealed vacuum pump â?? 150 lpm,Vacuum level : 5x10 2mbar Type rotary vane pump, dual stage, Oil mist filter, Oil recirculation, Automatic gas ballast control, 10 m3/h Optional facility for automatically turning off the vacuum pump when the antechamber is not in use One
2Recirculation Pump Optional Re circulating purified gases pro rata basis 20m3/
per hour
Service Support Efficient service facilities with trained engineers at your place
warranty One years comprehensive onsite warranty.
Product Description
Computer control and simple operation
Computer intelligent automatic control, pre-setting 5 automatic programs is allowable, user can set temperature,time,REV according to different sheet, taking care of sheet during drying.
Stable running and simple maintenance
Transfer system adopts double belt transmission to ensure stable running and bring simple daily maintenance.
Multiple-wing balance wind wheel design to control deposit floss,low noise, stable running.
Human design, safety and convenience
Super diameter design for loading door to bring convenience for loading clothes and unloading clothes, door depth is connected with drum inter face to avoid damaging sheet.
Drawer style of floss collection device to pull out for cleaning, so that reduce daily clean strength.
User can choose from Stainless steel or carbon steel panel,excellent material of temperature-isolating to prevent heat from emanating for taking from machine face temperature.
Fast drying, high efficiency and energy-saving
HG Series dryer adopt heat exchange device of large specification to effectively expand heating area, fast raise temperature, short drying time.
Inner drum adopt super design of high-density ventilation over 800mm to ensure heat cross sheet and equipped with ventilation of refined design, effectively utilise heat to make sheet become dry during short time and save energy consumption.
Single and dual direction of drum rotation can be set, intertwist and shrinking of large piece of sheet can be prevent to ensure high effective drying effect.
Accurate within �± 1.5 kPa across a pressure range of 15to 115 kPa (4.43 to 34.96 in Hg). Long-term non-stability has been measured continuously indoors and in natural conditions (with sensors mounted inside a data logger enclosure) for multiple sensors and is less than 0.1 % per year. Temperature effects on signal are less than 0.1 %per C across a wide temperature range (-40 to 100 C).
Accurate within �± 1.5 kPa across a pressure range of 15 to 115 kPa (4.43 to 34.96 in Hg). Long-term non-stability has been measured continuously indoors and in natural conditions (with sensors mounted inside a datalogger enclosure) for multiple sensors and is less than 0.5 % per year. Temperature effects on signal are less than 1 % across a wide temperature range (-20 to 50 C).
This ultrasonic sensor provides a easy method for distance measurement, with a 3cm to 4m detecting range, it is widely used in robotics applications and is also useful in security systems or as an infrared replacement.
Description:
This ultrasonic sensor is a non-contact distance measurement module
Electronic brick compatible interface and breadboard friendly
Dual transducer, three-pin on board (vcc, out and gnd)
Designed for easy modular project usage with industrial performance
Specifications:
6 x 2 x 1.3 cm (pins not included)
100pcs/carton
Net weight: 8.10g
Dimensions: 26 x 22 x 19cm
The US-series ultrasonic sensor uses the principle of high-frequency ultrasonic linear propagation to detect the edge position of the coil. Compared with the photoelectric sensor, it is not affected by the transparency of the materials, so it is very convenient to use without calibration.
1. Support analog/switch output, can be used with EPC-A10 or EPC-D12 correction controller
2. Suitable for opaque, transparent, ultra-transparent film edge application
3. No need to manually adjust the calibration
4. 200K ultrasonic beam
5. 1ms reaction time
6. The detection range is 5mm, the detection accuracy is 0.1mm
7. With offset display
Order Details
Item Name: US-400S/US-500 Ultrasonic Sensor
MOQ(Minimum Order Quantity): 1pc
Lead time: 1-2 days after receiving the deposit
Calculated Packing Size: 20cm*10cm*10cm,1.5kg/pc
Package: Carton/Wooden Box
Price Term: EXW,FOB, CIF, etc
Payment term: TT, L/C,Western Union
Country of Origin: China
1: Introduction
Left, middle, and right barrier identification.
Sec 3-color LED alarm,
high sensitivity detection.
Compatible with indicator light, help drivers know about the obstacles and assist parking.
2: Product Characteristics
With four ultrasonic sensors
LED distance display
Simulation tips of the distance barrier tips
"BiBi" alarm sound a warning
Concealed installation
waterproof, anti-rain and fog, shock
2.0 m long probe
• Main microarrays: PIC16F716
Monitor Size: 111í-27 í-26mm
Supports 2 or 4 ultrasonic sensor
Display with double wave bands and digits
Self-inspection function: disply will show which sensor is broken if any one does not work when starting.
Hydrogen Leak Detection Sensor NA1000AII
Main: hydraulic machinery and components, hydroelectric generating units; coal-fired generating units; generating units; electrical and electronic products processing; mechanical parts processing. Mainly engaged in the power industry host (steam turbine, water machine, boiler, turbine) accessories, spare parts, spare parts, auxiliary equipment and environmental protection equipment. Deyang YOYIK supply power plant, steel accessories are as follows:
Yoyik can offer many spare parts for power plants as below:
#DF-Hydrogen Leak Detection Sensor NA1000AII-DF
drum level transmitter UHZ-DB
Differential Pressure Gauge 0 - 0.25 Mpa
Motor protection circuit breaker PKZMC-10(6.3-10A)MOE.225394
Gateway I/O module 200-566-000-1Hh
Auxiliary power PSMU-1-12V/480W
current sensor CE-VZ01A-52MS2-0.2
meter thermometer WTY 1201606
Sensor DF311180-50-10-02
speed sensor CS-1H-G-080-05-02
Limit Switch D4A-4510N
IGBT FF200R17KE3
Eddy Current Sensor PR6424/004-031
BFP Rotation Speed Probe CS-03
Eddy Current Sensor PR6422/000-040
ACTIVE SPEED SENSOR CS-3-M16-L140
Eddy Current Sensor PR6422/003-120
analog pressure switch CS-III-M
RTD WZPK-24
oil pressure sensor and gauge RC861CZ084ZSSYM
Photoelectric converter EMC-02
CARD MODULE SVH61
Magnetoelectric speed sensor 70085-1010-214
surface thermal resistance WZPM2-001D
Bolt electric heating rod ZJ-14-2R
Oil pressure sensor 32302001001
Vibration sensor cable SDY 3800 XL 25 MM
eddy current proximity probe TM301-A02-B00-C00-D00-E00-F00-G01
axial displacement sensor TM0182-A50-B01-C00
rtd type k TE-111
Control power supply PSMC1-1-220V/240W
Eddy Current Sensor PR6422/100-131
Bolt electric heating rod ZJ-20-47
Ultrasonic Level Meter UHZ-510CLR
industrial pressure transmitter RC861CZ090HYR110AC
LVDT Sensor TD-1-0300-15-01
sensor K TE-111
Hydrogen Leak Detection Sensor NA1000AII
Agecho ultrasonic sensors salient features:
Agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c.
Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available.
Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band).
Agecho accuracy is 1% of the full scale.
Agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional)
Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module.
Agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use.
Agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target.
Agecho operating temperature 0 to 65 degree celsius.
Agecho temperature compensated measurement for better accuracy (optional).
Agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.
379 Hg M40 Hg L40 Series Ultrasonic Sensor Module Suppliers
Short on time? Let Hg M40 Hg L40 Series Ultrasonic Sensor Module sellers contact you.
