HG-P40C Ultrasonic Proximity Sensor & Module Description
* Using only a single transceiver sensor unit for transmit and receive signals.
* Convenient for distance measuring and object detection.
* Two types of transmit mode for convenience.
- Free Run : With a power supply, sensor transmits trigger and burst signal itself - for basic application
- External Trigger : External system(controller or processor circuit) controls the trigger signals - for advance application(distance measure)
* Two types of input power - Low(5V) for processor circuit usage and High(12V) for controllers.
* Four different output signal (simultaneously).
- Real time ultrasonic wave amplified from actually received ultrasonic. (for sound pressure measuring)
- Real time TTL level square signal(Square Wave) of detection signal. (for robots)
- Distance pulse width signal which is proportional to the nearest object from the sensor. (for robots and distance measuring)
- Proximity output signal(10mA current) within the preset range(0.5~4.5m) (for industrial use)
- Preset range is adjustable from 0.5 to 4.5 m. (factory distance preset available for volume orders)
* High performance ASIC Chip for stable transmission and sensitive reception. (Max. approx. 4,000 times amplification)
HG-P40C Ultrasonic Proximity Sensor & Module Features
* Multi functional transceiver model
* Two types of transmit modes (Free Run / External Trigger)
* Power Supply (Low : 5V / High : 6~16V)
* 4 different output signals (simultaneously)
- Real time received and amplified ultrasonic wave
- Real time TTL square signal
- Distance pulse width signal
- Detecting objects within the preset range(proximity)
* High performance ASIC Chip
HG-P40C Ultrasonic Proximity Sensor & Module Specification
* Input DC: Low : 5V / High : 6~16V
* Current consumption (when 12V is used)
- 12mA (Standby Mode)
- 18mA (When an object is detected within the range)
- 28mA (Proximity signal 10mA deducted)
* Distance Range (at flat plate)
- 0.4~3m (when 5V is used)
- 0.4~6m (when 12V±3V is used)
* Size
Module : 20x36x20(mm)
Sensor : Φ16
HG-P40C Ultrasonic Proximity Sensor & Module Description
* Using only a single transceiver sensor unit for transmit and receive signals.
* Convenient for distance measuring and object detection.
* Two types of transmit mode for convenience.
- Free Run : With a power supply, sensor transmits trigger and burst signal itself - for basic application
- External Trigger : External system(controller or processor circuit) controls the trigger signals - for advance application(distance measure)
* Two types of input power - Low(5V) for processor circuit usage and High(12V) for controllers.
* Four different output signal (simultaneously).
- Real time ultrasonic wave amplified from actually received ultrasonic. (for sound pressure measuring)
- Real time TTL level square signal(Square Wave) of detection signal. (for robots)
- Distance pulse width signal which is proportional to the nearest object from the sensor. (for robots and distance measuring)
- Proximity output signal(10mA current) within the preset range(0.5~4.5m) (for industrial use)
- Preset range is adjustable from 0.5 to 4.5 m. (factory distance preset available for volume orders)
* High performance ASIC Chip for stable transmission and sensitive reception. (Max. approx. 4,000 times amplification)
HG-P40C Ultrasonic Proximity Sensor & Module Features
* Multi functional transceiver model
* Two types of transmit modes (Free Run / External Trigger)
* Power Supply (Low : 5V / High : 6~16V)
* 4 different output signals (simultaneously)
- Real time received and amplified ultrasonic wave
- Real time TTL square signal
- Distance pulse width signal
- Detecting objects within the preset range(proximity)
* High performance ASIC Chip
HG-P40C Ultrasonic Proximity Sensor & Module Specification
* Input DC: Low : 5V / High : 6~16V
* Current consumption (when 12V is used)
- 12mA (Standby Mode)
- 18mA (When an object is detected within the range)
- 28mA (Proximity signal 10mA deducted)
* Distance Range (at flat plate)
- 0.4~3m (when 5V is used)
- 0.4~6m (when 12V±3V is used)
* Size
Module : 20x36x20(mm)
Sensor : Φ16
HG-C40U Ultrasonic Range Finder Sensor & Module Description
* ATmega 8 MCU
* Measures distance from the obstacle and sends the data using UART communication.
* Within 5mm Resolution
* Optional two transmitting mode for various use.
- Free Run : With a power supply, sensor transmits trigger and burst signal by itself (for basic application)
- External Trigger : External system(controller or processor circuit) controls the trigger signals - for advance application
* Two types of input power - Low(5V) for processor circuit usage and High (12V) for controllers. * Factory Default : 12V
* Various Setting Option
- Free Run / UART Trigger / External Trigger setting
- Ring buffer use or not use setting
- UART communication baudrate setting
- Free Run Trigger interval
* Output Signal
- Distance Data using UART(ASCII, mm)
- Real time ultrasonic wave amplified from actually received ultrasonic.
- Real time TTL level square signal(Square Wave) of detection signal.
* High performance ASIC Chip for stable transmission and sensitive reception.
* Sensor to PC communication using 'Interface Board' (RS232, Power regulator)
* Data display using monitor program from PC (Hyperterminal available)
HG-C40U Ultrasonic Range Finder Sensor & Module Specification
* Communication: UART(TTL)
* Input Voltage 5V, 12V(default)
* Current Consumption: 20mA(Typ) ~ 30mA(Max)
* Frequency: 40kHz
* Max. distance: 3.5m (at 5V); 5m (at 12V)
* Min. distance: 2cm
* Resolution: 5mm
Agecho ultrasonic sensors salient features:
Agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c.
Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available.
Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band).
Agecho accuracy is 1% of the full scale.
Agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional)
Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module.
Agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use.
Agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target.
Agecho operating temperature 0 to 65 degree celsius.
Agecho temperature compensated measurement for better accuracy (optional).
Agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.
1975 Hc Sr04 Ultrasonic Sensor Module Suppliers
Short on time? Let Hc Sr04 Ultrasonic Sensor Module sellers contact you.
The US-series ultrasonic sensor uses the principle of high-frequency ultrasonic linear propagation to detect the edge position of the coil. Compared with the photoelectric sensor, it is not affected by the transparency of the materials, so it is very convenient to use without calibration.
1. Support analog/switch output, can be used with EPC-A10 or EPC-D12 correction controller
2. Suitable for opaque, transparent, ultra-transparent film edge application
3. No need to manually adjust the calibration
4. 200K ultrasonic beam
5. 1ms reaction time
6. The detection range is 5mm, the detection accuracy is 0.1mm
7. With offset display
Order Details
Item Name: US-400S/US-500 Ultrasonic Sensor
MOQ(Minimum Order Quantity): 1pc
Lead time: 1-2 days after receiving the deposit
Calculated Packing Size: 20cm*10cm*10cm,1.5kg/pc
Package: Carton/Wooden Box
Price Term: EXW,FOB, CIF, etc
Payment term: TT, L/C,Western Union
Country of Origin: China
This ultrasonic sensor provides a easy method for distance measurement, with a 30cm to 3.5m detecting range, it is widely used in fields like industrial, auto, teaching and robots, etc.
Descriptions:
4\ resolution: 1 cm;
5\ ultrasonic frequency: 40khz;
6\ dimension: 1.6 x 1.1 x 0.9 inch / 4 x 2.8 x 2.3 cm (pins not included);
This ultrasonic sensor provides a easy method for distance measurement, with a 3cm to 4m detecting range, it is widely used in robotics applications and is also useful in security systems or as an infrared replacement.
Description:
This ultrasonic sensor is a non-contact distance measurement module
Electronic brick compatible interface and breadboard friendly
Dual transducer, three-pin on board (vcc, out and gnd)
Designed for easy modular project usage with industrial performance
Specifications:
6 x 2 x 1.3 cm (pins not included)
100pcs/carton
Net weight: 8.10g
Dimensions: 26 x 22 x 19cm
1.product description
This product is a car reversing radar that design and produce for large machinery and truck reversing due to the bad view of the environment . Through the camera after the environment through the screen displayed directly on the display screen, allowing the driver to intuitively understand the car environment; In addition, the ultrasonic probe precise detection of car rear obstacle distance and obstacle distance and send the other warning signal is displayed on the display screen. It allows the driver to easily determine the distance of the obstacle in the car detection range, azimuth and area, timely warning, to achieve safety reversing purposes. This product is waterproof. Shockproof, anti interference, detection distance and so on.
2.Supplied Accessories
accessory quantity Product model remark
Radar host 1 SINH-828A
probe 4 32T
Video link 2 According to the model matching
camera 1
display screen 1
power line 1 1m
product manual 1 SINH reversing radar monitoring system
certificate 1
3.technical parameters
rated operational voltage:DC24V; power rating:
Non contact ultrasonic level switch is a kind of non-contact, high reliability, high cost performance, easy installation and maintenance of material level measuring instrument.It doesn't have to contact medium can meet the requirements of most of the material level measurement.Firing pulse and receives the pulse interval and the antenna to the surface of the measured medium is proportional to the distance, to calculate the distance on the surface of the antenna to the measured medium.
Ultrasonic Level Sensor, As shown in Picture below, the ultrasonic sensor Tx transmits ultrasonic waves reflected after encountering an obstacle received by the ultrasonic sensor Rx calculates the distance d of the obstacle according to Time-Of-Flight (TOF):d = (C x t)/2
MB7066 XL-MaxSonar-WRL1
High Performance Ultrasonic Precision Rangefinder
MB7066 XL-MaxSonar-WRL1 Ultrasonic Rangefinder Product Description
The XL-MaxSonar-WRL1 is our longest range (10m) outdoor sensor.
The weather resistant XL-MaxSonar-WR is a rugged ultrasonic sensor component module. This outdoor sensor provides very short to long distance detection and ranging in a compact, robust PVC housing. The ultrasonic sensor meets the IP67 water intrusion standard and matches standard electrical 3/4inch PVC pipe fittings.
High output acoustic power combined with continuously variable gain, realtime background automatic calibration, realtime waveform signature analysis, and noise rejection algorithms results in virtually noise free distance readings. This holds true even in the presence of many of the various acoustic or electrical noise sources. The XL-MaxSonar-WR sensors are factory calibrated to match narrow sensor beam patterns and provide reliable long range detection zones.
MB7066 XL-MaxSonar-WRL1 Ultrasonic Rangefinder Product Specifiations
* Resolution of 1 cm
* 10Hz read rate
* 42kHz Ultrasonic sensor measures distance to objects
* RoHS Compliant
* Operates from 3.0-5.5V
* Low 3.4mA average current requirement
* Operational Temperature from -40C to +70C
* Maximum range of 1068 cm (450 inches)
* Long range, narrow detection zone
MB7066 XL-MaxSonar-WRL1 Ultrasonic Rangefinder Features and Benefits
* Extended 10 meter range detection and outputs
* High acoustic power output
* Readings can occur up to every 100ms, 10-Hz rate
* Triggered operation provides the range reading as desired
* Fast measurement cycle
* Quality narrow beam characteristics
* Low cost, long range IP67 sensor
MB7066 XL-MaxSonar-WRL1 Ultrasonic Rangefinder Applications and Uses
* Robot ranging sensor
* Autonomous navigation
* Distance measuring
* Long range object detection
* Industrial sensor
MB1240
XL-MaxSonar-EZ4
High Performance Ultrasonic Rangefinder
Product Description
The XL-MaxSonar-EZ4 has the highest noise tolerance and narrowest beam of any of our indoor sensors. The sensor is designed and calibrated to provide reliable range information to large targets even in environments with strong acoustic or electrical noise sources.
MB1240 Features and Benefits
* Narrowest beam in the XL-MaxSonar-EZ/AE sensor line
* Low power consumption
* Easy to use interface
* Large target detection
* Acoustic noise rejection
* 3.3v to 5.5v operational voltage
MB1240 Applications and Uses
* Great for people detection
* Security
* Motion detection
* Recommended for multi-copters and UAV's
* Used with battery power
* Autonomous navigation
* Educational and hobby robotics
* Collision avoidance
Mb7389
Hrxl-maxsonar-wrmt
High performance ultrasonic precision rangefinder
Product description
The hrxl-maxsonar-wrmt ignores smaller targets and only reports the range to target with the largest acoustic return. This is our most advanced weather resistant sensor designed for target detection and ranging outdoors or in tank or bin applications.
Mb7389 features and benefits
* factory calibrated beam width
* low operating voltages from 2.7v to 5.5v
* all range outputs are active simultaneously
* superior clutter rejection
Mb7389 applications and uses
* bin level measurement
* tank level measurement
MB1040
LV-MaxSonar-EZ4
High Performance Ultrasonic Rangefinder
Product Description
The LV-MaxSonar-EZ4 is the narrowest beam width sensor that is also the least sensitive to side objects offered in the LV-MaxSonar-EZ sensor line. The LV-MaxSonar-EZ4 is an excellent choice when only larger objects need to be detected.
MB1040 Features and Benefits
* Best side object rejection in the LV-MaxSonar-EZ sensor line
* Low power consumption
* Easy to use interface
* Best for large object detection
* Can be powered by many different types of power sources
* Can detect people up to approximately 4 feet
MB1040 Applications and Uses
* Landing flying objects
* Used with battery power
* Autonomous navigation
* Educational and hobby robotics
* Collision avoidance
MB7052
XL-MaxSonar-WRM1
High Performance Ultrasonic Precision Rangefinder
Product Description
The XL-MaxSonar-WRM1 ignores smaller targets and only reports the range to target with the largest acoustic return. This is one of our advanced weather resistant sensors designed for target detection and ranging outdoors or in tank or bin applications.
The weather resistant XL-MaxSonar-WRM1 is a rugged ultrasonic sensor component module. This outdoor sensor provides very short to long distance detection and ranging in a compact, robust PVC housing. The ultrasonic sensor meets the IP67 water intrusion standard and matches standard electrical 3/4â??inch PVC pipe fittings.
MB7052 Features and Benefits
* Clutter rejection provides range to the largest amplitude reflection within the field of view
* Real-time calibration, noise rejection and additional filtering provides stable range information
* Excellent for ranging to large objects in the presence of cluttered or noisy environments
* Excellent for applications that require consistently accurate outputs
* Impressive acoustic and electrical noise resistance
* 6.6Hz refresh rate on the MB7052
MB7052 Applications and Uses
* Autonomous Navigation
* Environments with acoustic and electrical noise
*Bin Level Measurement
* Tank Level Measurement
Pdsm010 particle sensor module product summary
Pdsm010 detects approx. 1m particle such as house dust, pollen, germs, dust mites and cigarette smoke and measures the concentration of floating particles in a room space up to maximum 30m3.
This sensor is an ideal product for automatic room air monitoring system such as an air purifier.
Pdsm010's signal is converted to pwm output by internal circuit and mcu program. Also, the sensor's filter circuit and mcu program can remove a noise in order to operate more stably when a noise is in-flowed in the signal.
Pdsm010 has advantages of both stable detecting ability and high manufacturing efficiency.
The sensor does not have an additional control point (vr trimmer) on the device unlike its previous model (dsm). It prevents potential malfunction often occurred by user's arbitrary modification.
Pdsm010 particle sensor module features
* customized sensitivity for efficient control in application
* detects approx. 1m particle
* mcu control (factory calibration)
* easy maintenance
* pwm output (low logic pulse active)
* noise protection
Pdsm010 particle sensor module applications
* air cleaners, air conditioners
* ventilation system, fan control
* iaq monitoring & control
* iot device
