Lx-c durometer meter applied to foam, sponge, shoe materials, such as durometer testing of materials with low hardness. This product is light hg/t2498-93 and other relevant standards.
1. Dial value: 0 ~100hc
2. Needle stroke: 2.5 mm
3. Measure range: 10 ~90hc
4. Needlepoint size: sr 2.5 mm
5. Dimension:115¡¡§¡é60¡¡§¡é25mm
6. Weight: 0.5 kg
Features:
* LCD display of 128 64 matrix is used.
* Hardness scales(HV ,HB,HRC,HRB,HRA,HS).
* RS232 interface and USB to PC
* Max 600 groups impact times:32¡«1 of data can be stored at internal.
* Back light display has been used to make convenient or the user in poor light.
* Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.
* Material of cast steel¡± is added HB values can be read out directly when D/DC impact device is used
to measure cast steel¡± workpiece.
* Power is two of AA battery. Continuous working period: approx. 100 h (no back light on).
* Software of PC can be installed according to the requirements of user. The function will be more powerful
to satisfy the more demands of quality control and management.
Product Features;
Six Impact Devices are available for special applications(D,DC,D+15,C,DL,G)
Direct display of hardness scales HRB,HRC,HV,HB,HS,HL;
Software to connect with PC and Dataview for PC operation;
Automatic identification Impact Devices and test direction (Except G);
Software data and upperlower limits setting and sound alarm;
Time and date setting; auto-clock;
On-Board memory holds 240-1000 groups of data;
Integral thermal printer, print all test results and histogram;
For all metallic materials;
Li Battery , low voltage indication and sound alarm;
LCD with blue back-light, showing all functions and parameters;
Wide measuring range;
Long standby time and stable performance of field work;
Technical specifications:
Hardness Scale:HL,HRC,HRB,HV,HB,HS
Accuracy:í+4HLD(760í+20HLD) repeatability of displayed value
Standard Impact Device:D
limits set measuring range:(170~960)HLDD Optional Impact
Devices:C DC D+15 DL G
Operating Temperaturee:0~40
Statistics Function:Average Max Min calculation,limits setting and alarm
Testing direction:Automatic
Min.thickness of hardened:0.8mm
Chargeing time:3~5hours
Power:Li Battery 4.2V/1600mAh
Charger:5V/500mA
Overall Dimensions:147*69*23mm
Weight:186g
Computer Interface:RS232
Min.Workpiece thickness:5mm (D DC DL D+15)1mm (C)10mm (G)
memory:240~1000 groups
Min.Workipece Weight:2~5Kg on stable support 0.05~2Kg with compact coupling
Min.Radius of Workpiece:Rmin=50mm(with support ring Rmin=10mm) Max.Workpiece
Hardnesss:996HV (D DC D+15 DL C) 646HB (G)
Continuous Working Time:About 200hours
Wide measuring range, for all metallic materials
Direct display of hardness scales hrb, hrc, hv, hb, hs, hl
Conversion to tensile strength (u.T.S.)
Test at any angle, even upside down
Removable printer included
Six impact devices are available for special applications
Large lcd display showing all functions and parameters
Battery low indication
New function of software calibration
Power charging indication on the keyboard led
Fault distinguish in details
1, each durometer type is made to a specific scale (i. E.A, c, d) and is capable of producing a value between 0and 100. Shore a is designed to measure the penetration hardness of rubber, elastomers and other rubber like substances such as neoprene, silicone, and vinyl. It can also be used for soft plastics, felt, leather and similar materials. Shore d is designed for plastics, formica, epoxies and plexiglass.
2, it meets standards: din 53505, iso 868, iso 7619, astmd 2240, jisk7215.
3, used the exclusive micro-computer lsi-circuit and crystal time base to offer high accuracy measurement.
4, digital display gives exact reading with no guessing and errors.
5, can communicate with pc for reading, printing and analyzing by the optional software and cable for rs232c interface.
6, automatic power off to conserve power.
7, use operation stand of optional parts can get good accuracy and repetitiveness due to constant measurement force to eliminate the errors caused by artificially applied different force.
Dimensions: 162x65x38mm
27865 Hardness Tester Suppliers
Short on time? Let Hardness Tester sellers contact you.
Six impact devices are available for special applications(d, dc, d+15, c, dl, g)
Direct display of hardness scales hrb, hrc, hv, hb, hs, hl;
Software to connect with pc and dataview for pc operation;
Automatic identification impact devices and test direction (except g);
Software data and upperlower limits setting and sound alarm;
Time and date setting; auto-clock;
On-board memory holds 240-1000 groups of data;
Integral thermal printer, print all test results and histogram;
For all metallic materials;
Li battery , low voltage indication and sound alarm;
Lcd with blue back-light, showing all functions and parameters;
Wide measuring range;
Long standby time and stable performance of field work;
The shore hardness tester as-120 series including type(a, b, c, d, e, o, do, oo), model complete, with different probe size, use for different measured objects and hardness value, to meet different request for kinds of material hardness measure. integrated design, small volume, light weight, simple structure, easy to use, intuitive readings and automatic shutdown function.
with low battery alarm indicator & average value calculation function.
auto switch off and manual shutdown.
use usb data output with connection pc.
provide bluetooth data output choice.
Accuracy1h
Resolution:0.1h
Range:1090h
Operating temperature:040°c
Size:170x63x24 mm
Power supply2x1.5vaaa um-4 battery
Weight:310 g (not including batteries)
Advantage:
1.Machine with self-checking function,the turret will automatically checking turret position right or not and calibrated automatically when tun-on machine.
2. Adopted 4.3 inch touch screen, new advanced design for operation interface
3. With HV&HKscale & hardness conversionfunction
4. Digital eyepiece with encoder, D1, D2 data no need manual input to machine, easy operation
5. USB interface, test result can be save to u-flash directly.6. Menu structure interface, all data can display on screen
6. One-time cast aluminum shell, structure more stable.
7.Car painting technology, looking more decent and bright.
8. Reserved optical path for add CCD cameraand connect with PC (optional function)
9. OK/NG judgement function
Application:
1.Widely used to test the hardness of all kinds of metal materials (steel, nonferrous metals, tinsel, cemented carbide, sheet metal, etc.)
2. surface layer / coating (Carburization, nitriding, decarburization layer, surface hardening layer, galvanized coating, etc.)
3. Glass, chip, ceramic, plastic and rubber, etc.
Specifications:
1.Hardness Scaleï¼?HV0.01, HV0.025, HV0.05, HV0.1, HV0.2, HV0.3, HV0.5, HV1
2.Test forceï¼?10, 25, 50, 100, 200, 300, 500, 1000gf
3.Loading:Automatic loading - dwell - unloading test force
4.Turret:Automatic turret
5.Magnification:10X Digital eyepiece; 10X, 40X Objective lens
Total magnification: 100X (observation), 400X (measuring)
6.Indenter:Standard Micro Vickers diamond indenter 136°±0.5°
7.Dwell time:1-99s (unit: 1 second)
8.Data storage:Yes, turn-off machine memory will automatic save
9.Data output:Built-in printer; U-flash (USB interface)
10.Data display:4.3 inch digital touch screen
11.X-Y table:Size: 100x100mm; Max. Move range: 25x25mm
12. Standards:GB/T4340, ASTM E384 & E92, EN-ISO 6507, JIS B-7734
- Wrist type hardness tester,
- Easy to read menu with back light
- Large LCD display with back light
- For most metals
- Based on the hardness HL value, convers to HRB, HRC, HV, HB, HS and Tensile strength.
- Impact devices D\DC\DL\C\D+15 and G are available for special applications
- Test at any angle, even upside down
- RS 232 output and internal memory in a bath of 1250 average readings
- Date and time display.
- Lower and upper limits setting with low-high display judge
- High accuracy +/- 0.5%
- Works on standard AAA batteries.
- Auto shutdown after two minutes.
- Conforming to ASTM A 956
The standard delivery are:
Main unit
Small supporting ring
Impact device D
Two AAA batteries
Test block with HLD-value
Software and cable
Carrying case
Operation manual
Cleaning brush
Leather wrist strap
Certificates.
Features:
Easy one handed operation
Digital Display
Compact body for areas of restricted space
Slim detector allows measurements to be taken on complex curved surfaces such as welds, moulds etc, as well as conventional flat surfaces
Conversion function for different hardness scales
Self calibrating
Supplied with NAMAS certified test piece
Used in any direction
Lightweight, portable and easy to carry
Using large-screen 128 * 64 dot matrix LCD module, information abundant and intuitive.
Can be pre-set limit, hardness, when beyond the scope it automatic alarm, convenience customers batch test.
English display: menu type operation, uses simple and convenient.
Shore Durometer, designed for testing the hardness of vulcanized rubber and plastic products, has simple structure, easy operation and reading, facility and high resolution. It complies with the standard of GB/T531-1999 and other relevant standard.
transform between hl/hrc/hrb/hb/hv/hs.
store the latest 250 groups measurements.
select measured material and way by key.
can show measurements repeatedly to remove the large errors.
use usb data output with connection pc.
provide bluetooth data output choice.
Product parameters
Accuracy
Display error 0.8% at ld=900
Measuring range:200~900 hld
Measurable material:9 different common materials
Operating temperature:-10°c~50°c°c
Relative humidity:90%
Size:140x70x30 mm
Power supply2x1.5vaaa um-4 battery
Weight:130 g (not including batteries)
This tester is designed for measuring the foam materials hardness property. It isd complied with ASTM D3574 and ISO 2439 standard. Total of eight test methods for selection. All test procedures will be pre-install into the PLC system.
Customer can easily choose one of method to perform the measurement. This machine supports standard and self-define test program, test parameters such as sample size, speed, rest time, cycles, can be tailor-made on touch screen.
This is a semi-automatic Rockwell hardness tester with digital display. The Rockwell hardness tester can be used to test the Rockwell hardness of ferrous metal, non-ferrous metal, nonmetal materials. The main shaft system adopts friction-free structure, achieve automatic testing force loading/keep/unloading, which avoid the error caused by the manual operation. The digital display can avoid the indication error, the testing results can be printed out.
Laboratory Enterprises manufacture and supply advanced Tablet Hardness Tester for the use to many pharmaceutical colleges, medical colleges and advanced research institutes. The level of hardness can be displayed in three different units which can be chosen according to the needs. There is a backup power facility to keep the device running in the case of power failure. Automatic peak point calculation has been enabled to find breaking point of tablet automatically.
Laboratory enterprises introduces advanced tablet hardness tester, which having three kind of unit to display result as per select by user as Kg / Ib / N, battery backup facility provided to avoid interruption in experiment due to electricity failure, without peak and auto peak facility has provided to get break point of tablet automatically, dual sided screen resolution provided to comfort to see from front end and back end to user, in addition to all these features Laboratory enterprises provides PC connectivity but it is optional by this facility user can configure instrument as their desire and walk out for another task .
Introduction:
Through leaving a superficial trace
on the dry coating film with a certain pencil
hardness, the surface will be variably damaged
by the hardest pencil to evaluate pass/fail or
hardness . Recommend to apply on the smooth
film surface. Use variety of different hardness
pencils,the angle between pencil and the coated
surface is 45, scratch on the coated surface under
a certain of force, the scratch resistance hardness
of the coating is the pencil hardness which just
scratched the coating.
Technical Specification:
Pressure of Pencil Tip: 1000/750 /500g
The angle between pencil and film surface is 45
Three points are touched on the tested
surface ( roller, pencil tip)
Scratch Speed: 1 mm/ sec
Hardness Class:
Standard pencil: A set of Mitsubishi pencil (14 pcs from 6B to 6H)
Other brand pencils are available upon request ( Option)
Introduction:
BEVS1301 Pencil Tester complies with the
requirements of ASTM D3363 and ISO15184
standard, through leaving a superficial trace
on the dry coating film with a certain pencil
hardness, the surface will be variably damaged
by the hardest pencil to evaluate pass/fail or
hardness . Recommend to apply on the smooth
film surface. Use variety of different hardness
pencils,the angle between pencil and the coated
surface is 45°, scratch on the coated surface under
a certain of force, the scratch resistance hardness
of the coating is the pencil hardness which just
scratched the coating.
Technical indicators:
1. Measuring range : HLD (170 ~ 960) HLD
2.Measuring direction : support for vertical downward , oblique , horizontal, oblique , straight up
3.measure material : steel and cast steel, alloy tool steel , stainless steel, gray iron, ductile iron, cast aluminum, zinc alloys ( brass ) , copper-tin alloy ( bronze ) , copper , forged steel
.5 hours
11.Communication interface standard : USB1.1
12. Dimensions : 211mm ¡Á 81mm ¡Á 35mm
Features:
1.Based on Leeb hardness measuring principle, can detect a variety of metal materials .
2.A host can be equipped with 7 different impact devices , automatic identification of impact device type , replacement without recalibration .
3. Support " forged steel (Steel)" material , when using the D / DC type impact to test " forged " sample , reading directly HB values, without manual look-up table .
4.The bounds of the hardness value can be pre-set,automatically alarm when out of range,hardness value can be pre-set upper and lower limits , out of range alarm , meeting the needs of batch testing for users.
Large-screen 128 ¡Á 64 dot matrix LCD display, information-rich and intuitive.
6. Full Chinese display , menu-driven operation, simple and convenient.
7. EL backlit display,available in the dark environment.
8. Storing up to 500 groups ( impact times 32 ~ 1 ) hardness measurements , each single measurement data including value , average, measurement date , impact direction, frequency , materials, hardness, and other information .
9. Integration of thermal printers and instrument, working quietly , fast printing, printing test report on the spot.
With functions of software calibration.
10.Built-in NiMH rechargeable batteries and charge control circuit ; no less than 150 hours of continuous working time ; with functions of automatic sleep and automatic shutdown and other power saving functions.
11.Remaining charge indicator on the LCD , real-time display the remaining power ; with charging instructions , operator can know the charging level at any time.
12. USB interface , quickly and easily exchanging data with a PC . Can be equipped with computer software,with functions of transmission measurement, measured value storage management, statistical analysis of the measured values , the measured value printed reports , batch setting instrument parameters and other rich features to meet the higher requirements for quality assurance and management.
Main application:
1.Mold cavity.
2.Bearing and other parts.
3.Failure analysis of pressure vessel, steam turbine generator set and the equipment.
4.Heavy workpieces.
5. Installed mechanical or permanent assemblies.
6. Narrow test space workpieces.
7.Formal requirements of original records on the testing results.
8.Specification of metal material warehouse.
9.Fast inspection of monitoring sites within a wide range of large workpieces.
Dimensions : 211mm ¡Á 81mm ¡Á 35mm
27865 Hardness Tester Suppliers
Short on time? Let Hardness Tester sellers contact you.
