Aegis XN520 PRO is a GSM Voice Terminal that will connect GSM Sim with two parallel FXS Ports. These ports can be interface with PBX, telephone instrument, dial pad and desktop softphone for making and receiving calls through GSM network in any office.
1.General description
Gsm fwt-8848 is a gsm to analog converter(single port, insert 1 sim card only), the device can produce a fxs line to allow a regular phone to be connected and used just like a local landline(pstn) except your calls will go out the gsm network. This device can both receive and make calls.
The main application is: connecting the rj-11 fxs line to connect ordinary telephone set for voice call; to connect pbx for call extensions; to connect billing systems for public phone use; to connect voip fxo gateway to realize voip call termination; to connect alarm system for security purpose, etc. It is not a voip gateway, nor a gsm+voip gateway, it is a gsm fixed wireless terminal that produces an analog fxs phone line .
2.Features:
1)frequency:gsm 900/1800mhz or gsm 850/900/1800/1900mhz
2) it is a 1 channel gsm gateway which has 2 rj-11 outputs for extensions;
3) it can connect with ordinary telephone set, pbx , voip gateway, billing meter etc. ;
4) dialing tone frequency:450hz;
5) employ industrial module to make;
6) can adjust dial interval from 0.5sec to 9 secs by setting up from telephone set;
7) can adjust voice volume by setting up from telephone set;
8) sim card supported (1.8v, 3v);
9) caller id display;
10) dtmf dialing;
11) bell signal;
12) polarity reversal;
13) the rj-11 socket which connect the phone or billing system for metering purpose;
14) antenna socket (sma);
15) ip presetting;
16) working status and signal strength by led indicator;
17) imei change (optional).
18) back up li-ion battery( optional) 7.2v 1300mah.Standby 24hrs, talking time: 2.5hrs.
Main Functions:
1. Suitable for GSM 900/1800 MHz or 850/1900 MHz, using SIM card
2. Can making calls via GSM or PSTN (optional) by hand.
3. Big LCD display which can show signal intensity, clock, battery consumption,
new message, startups of alarm and so on
4. Caller ID
5. Language available: English, Chinese
6. Support SMS, Call log, phonebook, call service and so on.
7. Support the functions of redialing and hands free.
8 . Built-in PIN code protection featured with locking device/card/network
9. The power supply adopts both battery supported and external adapter.
Main Functions:
1. Suitable for GSM 900/1800 MHz, using SIM card
2. Can making calls via GSM or PSTN by hand.
3. Big LCD display which can show signal intensity, clock, battery consumption, new message, startups of alarm and so on
4. Caller ID
5. Language available: English, Chinese
6. Support SMS, Call log, phonebook, call service and so on.
7. Support the functions of redialing and hands free.
8. Built-in PIN code protection featured with locking device/card/network
9. The power supply adopts both battery supported and external adapter.
Gsm fixed wireless terminal
The product is particularly suitable for telecommunication operators to entry the common fixed telephone market. With easy installation and high efficiency, it can be widely applied in
Various enterprises
Institutes
Movable carriers
Places of interest/ scenic spots
Large exhibitions
Consulting meetings
Others
Where telephone lines are unavailable or very limited. The installation is easy and rapid and can be put into use as soon as within mobile network, while can solve problems of line deficiency and temporary telecommunication. It can be connected to common phones via gsm network, providing a service compared favorably to fixed phones, and producing a communication effect similar to that of fixed phones.
1680 Gsm Fixed Wireless Terminal Pro Suppliers
Short on time? Let Gsm Fixed Wireless Terminal Pro sellers contact you.
1.SMS
2.CALL ID identify incoming call
3.200sets of powerful Phonebook for quick dial
4.Display the call duration in real time in screen
5.Wireless signal indicator available
6.Rechargeable Backup battery
7.Battert capacity indicator available.
8001b is a 8-channel gsm fixed wireless terminal. It can produce a fxs line to allow a regular phone to be connected and used just like a local landline(pstn) except your calls will go out the gsm network. This device can both receive and make calls.
The main application is: connecting the rj-11 fxs line to connect ordinary telephone set for voice call, to connect pbx for call extentions, to connect billing systems for public phone use, to connect voip gateway to realize voip call termination, to connect alarm system for security purpose, etc. It is not a voip gateway, nor a gsm+voip gateway, it is a gsm fixed wireless terminal that produces a analog fxs phone line.
1.It is a 8-channel gsm fixed wireless terminal that has 8 ports fxs interfaces;
2.Each port has 1 sim card (1.8v, 3v)
3.It can connect with ordinary telephone set, pbx, voip gateway, billing meter etc.
4.It is compatible with asterisk
8001b is a 8-channel gsm fixed wireless terminal. It can produce a fxs line to allow a regular phone to be connected and used just like a local landline(pstn) except your calls will go out the gsm network. This device can both receive and make calls.
The main application is: connecting the rj-11 fxs line to connect ordinary telephone set for voice call, to connect pbx for call extentions, to connect billing systems for public phone use, to connect voip gateway to realize voip call termination, to connect alarm system for security purpose, etc. It is not a voip gateway, nor a gsm+voip gateway, it is a gsm fixed wireless terminal that produces a analog fxs phone line.
1.It is a 8-channel gsm fixed wireless terminal that has 8 ports fxs interfaces;
2.Each port has 1 sim card (1.8v, 3v)
3.It can connect with ordinary telephone set, pbx, voip gateway, billing meter etc.
4.It is compatible with asterisk
5.Dialing tone frequency: 450hz
6.Employ industrial module (850/900/1800/1900mhz)
7.Can adjust voice volume by setting up from telephone set
8.Caller id display
nal strength by led indicator
16.Imei change
Aegis has also developed the advanced version GSM Voice Terminal, of this GSM FCT, which allows the user to avail this product with more powerful features.
Aegis FCT XN520 is a GSM Fix Cellular Terminal which has provision to connect GSM Sim with two parallel FXS Ports. FXS Port can be interface with PBX, telephone instrument, dial pad and desktop softphone for making and receiving calls via GSM network during office hours from their desk.
1. Easy to install
2. Rugged Design
3. High gain antenna
4. Emergency number
5. Hot dialing
6. Welcome message
7. Unlimited conference
8. Speed dial
Main Features:
1£® Main body with whole stainless steel body, solid and temperature bearable
2£® Handset free, loudspeaker,
3£® Heavy duty Vandal resistant buttons.
4£® Well treated metal keypad against rust and corrosion
5£® Resume lightning proof protection automatically standard to ITU-T K21
6£® Waterproof grade about IP65
7£® The metal shell is provided with grounding connection device and is absolutely insulated with inner circuit and electric ,then has the effect of electromagnetism shield.
8£® Support hotline call, can realize ring off automatically if the other side close.
9£® Totally adopt SMTC craftwork keep very good quality.
10£® The design is super thin and smart. Embed style and hanging style can be chosen.
11£® Every call is limited(set by five minutes),auto ring off if time exceeded. (Optional)
12£® Colours: RED + Stainless steel colour, If the qty over 100pcs can be To customer specification.
Applications:
As Public telephone for indoor or outdoor, elevator phone, Taxi or bus stands or station, Highway call box. Railway, metro, ATM machines side, Tunnel, Port, Dock, Mines, Generation facilities¡.
A good ideal telephone for use in wet or corrosive atmospheres
Specification:
Main technical indexes£º
1. Network Interface: GSM Frequency £º850/900/1800/1900MHZ
2. Ringing: Through internal Speaker/ringer
3. Power Supply: Re-chargeable Battery powered: 9V/14Ah, Solar back-up: 12V/30W
4. Time out: selectable 0-20 minutes
5. Temperature: -20¡æ~ +60¡æemp
6. Relative Humidity: up to 90%.
1. A Comfortable Contoured Shape - DIY Magnetic Detachable Up Cover
Maximum comfort, the mouse is equipped with two interchangeable panels â?? one a honeycomb shell that makes the mouse lighter - and the other solid non-perforated.
2. Light Speed Pro-grade wireless 2.4Ghz
A pro-grade wireless solution that achieves wired-like performance, built-in USB Nano receiver
3. 1:1 Tracking Advanced Sensor
Battle with an ultra-accurate and high-speed tracking engine, 6 Active and Adjustable Up to Maximum DPI
4. Dynamic Multicolor RGB Backlighting
Full-spectrum, fully-customizable RGB, select your own personal RGB matching with your gameplay
5. Rechargeable Battery Built in
600mA Rechargeable Battery - Charging time 3 hours - Working time Up to 70 hours
6. Ultra Speed scroll wheel - Rubber Sillicon
Premium Rubber Sillicon Scroll make you Scroll better and get more done.
7. All New High-Performance Switches " HUANO 50 million keystroke 2 Keys R/L "
Made for gaming left/right and 2X button switches provide ultrafast response
8. Dual High Quality Connection " 2.4Ghz USB Nano Receiver + Wired USB Type C Cable 2.0 "
USB Nano Receiver Working as wireless + USB C Cable Working as Wired Mouse - Rate of return: 1000HZ
9. Packing & Contents
B Color box Packing + User Manual 2 Page + USB Nano Receiver + USB Type C Cable
The DAQ-LP-CT4G wireless current acquisition sensor terminal is equipped with a low-power, high- sensitivity open-type transformer . It converts the large current on the primary side into a small current on the secondary side through the principle of electromagnetic induction, and is then used for current monitoring . It can sensitively detect the size of the line current and report data to the designated platform server wirelessly at regular intervals .
The terminal adopts GPRS/NB-IOT/LoRa communication mode to overcome the wireless communication obstruction caused by the special environment on site, greatly simplifying the on-site deployment time and reducing construction costs . The working status of the equipment is divided into three states: sleep , collection and storage , and activation and reporting . This terminal is equipped with a variety of open-close transformers, a wide range of measured current, high-quality magnetic core materials, an open-close structure, and is easy to install. It is used for current monitoring and collection in AC motors, lighting equipment, air compressors, heating, ventilation and air conditioning equipment, building automatic control systems, industrial city networks, rural power grid transformation projects and other scenarios .
The DAQ-LP-CT4G wireless current acquisition sensor terminal is equipped with a low-power, high- sensitivity open-type transformer . It converts the large current on the primary side into a small current on the secondary side through the principle of electromagnetic induction, and is then used for current monitoring . It can sensitively detect the size of the line current and report data to the designated platform server wirelessly at regular intervals .
The terminal adopts GPRS/NB-IOT/LoRa communication mode to overcome the wireless communication obstruction caused by the special environment on site, greatly simplifying the on-site deployment time and reducing construction costs . The working status of the equipment is divided into three states: sleep , collection and storage , and activation and reporting . This terminal is equipped with a variety of open-close transformers, a wide range of measured current, high-quality magnetic core materials, an open-close structure, and is easy to install. It is used for current monitoring and collection in AC motors, lighting equipment, air compressors, heating, ventilation and air conditioning equipment, building automatic control systems, industrial city networks, rural power grid transformation projects and other scenarios .
GSM fixed Fax Terminal voice/fax function IMEI changeable
1. Using SIM card and suitable for GSM850, 900, 1800, 1900MHz (optional).
2. Send/receive faxes through connecting to fax machine, except for making & answering calls after connection to telephone set.
3. Available to connect with telephone set, PBX, billing machine, etc
4. Available to connect with backup battery, and the stand-by time can reach 24 hours in case when
The power is cut off.
5. Built-in PIN code protection featured with locking device/card/network
6. With LCD display to show caller ID
7. Optional to match with various high-gain antennas, featured with signal intensity indicator, Working status indicator, breakdown indicator, etc
8. Installed with IMEI changing function.
Based on w-cdma and can be compatible with gsm networks
Can connect to phone, pbx, voip, ip-pbx , billing meter and etc.
Support connecting with internet through usb line and can surf the internet wirelessy. The pc computer can send and receive text messages by its connection
Can lock sim card
Support caller id with dtmf/fsk
Dtmf and pulse dialing
Support sms
Reversal polarity signal supported for billing charging
Making and answering calls after connecting to telephone set
2rj-11 ports can support connect with extension
Real time displaying of wireless network signal strenght
Technique parameters
Multimode operation ¿chsupa/hsdpa/umts/edge/gprs/gsm
Triple-band hsdpa/umts 850/1900/2100 mhz
Quad-band edge/gprs/gsm 850/900/1800/1900 mhz
Hsupa uplink up to 2.0 mbps
Hsdpa downlink up to 7.2 mbps
Wcdma (umts) uplink data rate up to 384 kbps
Edge data up to 237 kbps dl and 118kbps ul, 3gpp release4, class 12
Gprs data up to 85.6 kbps dl and 42.8 kbps ul
Power supply: dc12 v
Output power:
Class 3 for umts/hsdpa/hsupa
Class 4 for gsm 900
Class 1 for gsm 1800
Class e2 for edge 900/1800
Usb: usb 2.0 full speed
Antenna interface:
Antenna gainú¦ >1.5dbm
Sensitivity: < -104 dbm
Antenna transimission power: < 3 w
Working environment ú¦
Operating temperature: -10 ~ +55íµ
Storage temperature: -40 ~ +80íµ
Atmosphere pressure:86-106kpa
Environment noise:ú+60db
Rj-11 phone interfaceú¦
On hook voltage: 45v
Off hook current: 30ma/41ma
Dialing tone frequency : 450hz
Features:
Based on GSM900MHz/1800MHz
SIEMENS TC35i GSM module
Support reverse polarity
Connect to PBX
Support fax
Support GPRS
Main Functions:
Suitable for GSM 850/900/1800/1900MHz, using SIM card
Connect with telephones to make and answer calls
Support Fax
Support GPRS
Detect called party answer, and provide exact polarity reversal signal for charging
Caller ID
Dialer function inside, programmable call routing
(such as you can set 193 or 17911 IP phone when launching long distance call)
Provide an integrated telephone tone
Support redialing and hands-free
Available to wireless signal indicator
Setting up and modification of parameters through the phone set or PC
Double security by phone password and PIN code
Technical Parameter
Working Frequency: 900/1800Mhz or 850/1900Mhz or 850/900/1800/1900Mhz
Phone interface: DTMF line interface(RJ11 Phone Interface)
On-hook Voltage: 45V
Off-hook current 30mA/41mA
Dialing tone frequency: 450Hz
Antenna Plus: >3dB
Emission Power: 2W
Receiving Sensitivity: GSM900: <-117dB
Working Voltage: AC220V/DC12~48V
Neos3000a fixed cellular terminal serves as a gateway between a gsm network and your company private branch exchange (pbx). It connects to the analogue trunk of a pbx telephone system or a standard phone and routes your call through a sim card in the fct and out via the gsm network, converting the expensive pstn-to-gsm call into mobile-to-mobile call.
Product features:
1. Dramatic cost reduction
2. Signal strength indication
3. One voice channel pstn interface
4. Dual band gsm module (900/1800mhz)
5. Time controller: control outgoing time from 000~999 minutes
6. Counter unit: second, minute or call
7. Remote programming: setting via dtmf tones from the phone
8. Fake ring back tone: simulation of ring back tone
9. Lcr: least cost routing with automatic choice between gsm and pstn
10. Polarity reversal: recognition of call start / end
11. Built in caller id: calling party phone number display.
13. Mvpn: mobile vpns allow users to roam easily among various wired and wireless networks
14. Security lock-network / sim / pin lock, etc.
15. Fxs and fxo interfaces
Simple to install and easy to maintain
Network support: gsm 850 900 1800 1900 mhz
Imei changing function.You can change the imei to any 15digital code.
Highquality voice
Wide voltage range & low power consumption
Provide accurate antipolarity signal
Support dtmf
Support pc fax
Call forwarding
Caller id
Support 2nd stage dialing
Provide command sets from phone keypad
Add prefixal code automatically:
Skype: tinazhu
Callback function:
Barred telephone numbers can be set flexibly
Locking wireless terminal, locking sim card, locking districts and locking network
Industrial module
Connection mode: rj11 phone sockets
Enhanced high gains external antenna
Backup battery (optional)
Power on/off indicator
Signal strength indicator
SC-GP-IR 4 G wireless infrared meter reading terminal is a general electricity meter gas meter reading terminal based on infrared communication, GPRS wireless transmission, DC wide voltage power supply launched by Shanghai Digital Mining Internet of Things Technology Co., LTD. It can collect power data, voltage, current, power factor and other power parameters of state grid electricity meter (support 645 and 698 protocol).
Introduction to the principle of infrared meter reading: The infrared photoelectric probe can regularly read the parameter information of the smart meter through the infrared optical port and upload it. The infrared meter reader has the function of infrared signal modulation and demodulation, modulates the binary digital signal into a pulse sequence of 38 KHz frequency, and drives the infrared emitting diode to send in the form of infrared light pulse; the transceiver transforms the received light pulse into electrical signal, and then amplify, filter and send to the demodulation circuit for demodulation, restore to the binary digital signal, after the message analysis, send to the server according to the specified format (such as json).
The wireless infrared meter reading terminal supports the GPRS / 2G / 4G / NB-IOT / LoRa communication mode, which greatly simplifies the site deployment time and reduces the construction cost. The terminal supports all scenarios of meters, suitable for electricity meter data collection, smart city data collection, power monitoring data collection, energy saving and emission reduction data monitoring system data collection, energy consumption monitoring system data collection, photovoltaic system data collection, intelligent monitoring data collection, robot data collection, intelligent security system data collection, cloud platform data collection; electricity meter verification and testing table; especially suitable for the photovoltaic power generation system and the total meter of the power grid Bureau are completely closed, and cannot open any seal.
1680 Gsm Fixed Wireless Terminal Pro Suppliers
Short on time? Let Gsm Fixed Wireless Terminal Pro sellers contact you.
