FSM-80S fusion splicer is core-to-core alignment single fiber splicer succeeding to 60S.In addition to ruggedized concept,which 60S created,the fusion splicer 80S has a series of new features,such as Automated wind-protector and tube-heater for quicker splicing cycle as well as fewer operation steps,innovative carrying-case design for quicker preparation,powerful Li-ion battey for longer operation,high resolution bigger LCD monitor,and built-in operation manuals in various languages. Market is from backbone network installation to opto-electronics components production for quality splice.
Features
Rugged construction providing shock, dust and moisture resistance
Dual monitor position with automatic image orientation
Automatic arc calibration and iber identiication
User-selectable iber clamping method sheath clamp or fiber holders
Auto-start tube heater feature
Color LCD display with anti-relective coating for excellent visibility in bright sunlight
Simultaneous battery charge and splicer operation
Long life battery (up to 160 splice/heat cycles per charge)
Detachable work table incorporated into the transit case
Data and video download software and splicer upgrade software included; software upgrades through PC application via the internet
Green friendly RoHS & WEEE compliant
Specifications
Model FSM-60S
Applicable Fibers SM(G.652),MM(G.651), DS(G.653),NZ-DS(G.655)
Cladding Diameter 80 um to150 um
Coating Diameter 100 um to 1000 um
Fiber Cleave Length 8 to 16mm with 250um coating diameter, 16mm with 900um coating diameter
Typical Average Splice Loss 0.02dB with Sm, 0.01dB with mm, 0.04dB with DS, 0.04dB with NZDS
Splicing Time Typical 9 seconds with standard single-mode fiber
Arc Calibration method Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
Splicing modes 100 preset and user programmable modes
Splice Loss Estimate Based upon dual camera core alignment data
Storage of Splice Result Last 2000 results to be stored in the internal memory
Fiber Display X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
Magnification 300X for single X or Y view, or 187X for X and Y view
Viewing method Dual cameras with 4.1 inch TFT color LCD monitor
Operating Condition 0 to 5,000 m above sea level, 0 to 95 % RH and -10 to 50°C respectively
mechanical Proof Test 1.96 to 2.25N
Tube Heater Built-in tube heater with 30 heating modes; auto-start function
Tube Heating Time Typical 30 seconds with FP-03 sleeve, 35 seconds with FP3(40), 35-55 seconds with Fujikura micro sleeves
Protection Sleeve Length 60mm, 40mm, micro
Splice Cycles with Battery Typical 160 cycles with power save functions activated
Power Supply Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-11, 13.2V DC with BTR-08 battery
Terminals USB 1.1 (USB-B type) for PC communication.
Mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater
Wind Protection Max. wind velocity of 15m/s. (34 mph)
Dimensions (W × D × H ) 136 × 161 × 143 mm; 5.3 × 6.3 × 5.6 inches
Weight 2.3 kg (5.1 lbs) with AC adapter; 2.7 kg (5.9 lbs) with BTR-08 battery.
Features
• Rugged construction providing shock, dust and moisture resistance
• Dual monitor position with automatic image orientation
• Automatic arc calibration and fiber identification
• User-selectable fiber clamping method – sheath clamp or fiber holders
• Auto-start tube heater feature
• Color LCD display with anti-reflective coating for excellent visibility in bright sunlight
• Simultaneous battery charge and splicer operation
• Long life battery (up to 160 splice/heat cycles per charge)
• Detachable work table incorporated into the transit case
• Data and video download software and splicer upgrade software included; software
upgrades through PC application via the internet
• Green friendly – RoHS & WEEE compliant.
Fujikura fsm-60s fusion splicer is a updation of fujikura fsm-50s fusion splicer, 60s machine sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable fusion splicer in the market today. The new rugged construction adds improved reliability by resisting shock, dust, and rain, and can withstand a 30" drop test.
The fsm-60s splices a optical fibre in 9 seconds and heats a 60mm splice sleeve (heat shrinkable tube)in 30 seconds, for a total cycle time of only 39 seconds. New features, such as automatic tube heater operation, user-selectable clamping method (sheath clamp or fibre holder system), automated monitor tuolima image orientation, and battery charge capability during splicer operation provide the end user a productivity tool they can count on.
Description:
Fujikura fusion splicer, 4.1" color screen, standard accessories, including cleaver ct-30a. Multiple foreign languages menu is optional.
Features:
>>> core to core fiber alignment system pas environment (rain, dust, shock) resistant features
>>> world's most compact and lightest of its class
>>> arc calibration-free system
>>> 4.1" tft color lcd monitor
>>> dual-directional operating system
>>> long life battery
>>> fiber holder option
>>> detachable work plate (attached to carrying case)
Standard original fujikura packing
279 Fujikura Fusion Splicer Fsm 80S Suppliers
Short on time? Let Fujikura Fusion Splicer Fsm 80S sellers contact you.
Fujikura fsm-60s fusion splicer is a updation of fujikura fsm-50s fusion splicer, 60s machine sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable fusion splicer in the market today. The new rugged construction adds improved reliability by resisting shock, dust, and rain, and can withstand a 30" drop test.
The fsm-60s splices a optical fibre in 9 seconds and heats a 60mm splice sleeve (heat shrinkable tube)in 30 seconds, for a total cycle time of only 39 seconds. New features, such as automatic tube heater operation, user-selectable clamping method (sheath clamp or fibre holder system), automated monitor tuolima image orientation, and battery charge capability during splicer operation provide the end user a productivity tool they can count on.
Description:
Fujikura fusion splicer, 4.1" color screen, standard accessories, including cleaver ct-30a. Multiple foreign languages menu is optional.
Features:
>>> core to core fiber alignment system pas environment (rain, dust, shock) resistant features
>>> world's most compact and lightest of its class
>>> arc calibration-free system
>>> 4.1" tft color lcd monitor
>>> dual-directional operating system
>>> long life battery
>>> fiber holder option
>>> detachable work plate (attached to carrying case)
Applicable fibers SM MM DS NZDS
Fiber cleaved length 8-16mm
Fiber diameter Cladding diameter: 80-150¦Ìm;Coating diameter:100-1000¦Ìm
Fiber Count Single
Fiber aligning method Core aligning
Return loss £¾60dB
Actual average splice loss 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS)
Splicing mode Auto
Typical splicing time 9 sec, with standard SM fiber
Splicing mode 12 (templet), 188(user)
Tube typical heating time 30 sec
Protection sleeve length 60mm, 40mm
Storage of splice result 5000 results, 3 parameter per result
Tension test 2N
Fiber magnification 400X (X or Y view), 200X (X and Y view)
Electrode life 2500
No. of splice/heating with battery Typical 130 cycles
Image change over The fiber image can be turned over
Display screen 5 inch color LCD monitor
Terminal RS232
Power supply AC 100-240V with AC adapter inner Li-battery (6600mAH)
Operating condition 0-5000m above sea level, -10-50¡ã Max wind velocity of 15m/s
Dimension 150mm(L)¡,150mm(W)¡,160mm(H)
Weight 3.52Kg including battery.
Demo condition fujikura arc fusion splicer with fluke fiber inspector mini- minimal use
Fsm-60s splicer with ct-30 cleaver fluke ft500 tester
Features:
Rugged construction providing shock, dust and moisture resistance
Dual monitor position with automatic image orientation
Automatic arc calibration and fiber identification
User-selectable fiber clamping method – sheath clamp or fiber holders
Auto-start tube heater feature
Color lcd display with anti-reflective coating for excellent visibility in bright sunlight
Simultaneous battery charge and splicer operation
Long life battery (up to 160 splice/heat cycles per charge)
Detachable work table incorporated into the transit case
Fsm-60s fusion splicer kit includes (with cleaver):
Ct30a cleaver
Adc-13 ac adapter
Acc-14 ac cord
Spare electrodes (pair)
Sheath clamp
Usb cable
Splicer carrying strap
Quick reference guide
Video instruction manual
Jp-05 splice sleeve cooling tray
Transit case with carrying strap
Ft500 fluke networks fiberinspector mini - information
The ft500 fluke networks fiberinspector mini video microscope puts the solution to contaminated end-faces in the palm of your hand. This portable video microscope works ten times faster than traditional scopes. Simply insert the probe and inspect installed fiber connectors through the bulkhead adapters without accessing the backside of the patch panels.
Ft500 includes:
Fiberinspector mini video microscope includes fiber probe and display, ac adapter/battery charger, probe adapter tips (st, sc and universal 2.5mm patch cord tip) and soft carrying case).
* we are selling this as a complete kit and will not separate.
1.Applicable type of fibers:smf(g.652/657), mmf(g.651), dsf(g.653), nzdsf(g.655)
2.Fiber count:single to 12
3.World's first 6-direction 30 inch drop proof, tough in harsh conditions.
4.Wide color lcd monitor
5.High resolution 4.7 inch monitor with better visibility under the sun.
It adopts advanced pas fiber adustment technology . Adopt four motors drive, have fiber
Adjustment function, it is not only used for fttx project, but also can be used for the trunk
Line, it is a machine which is the smallest volume , the lightest weight , the most fast splicing
Speed
The Fujikura FSM-60S fusion splicer sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable fusion splicer in the market today. The new rugged construction adds improved reliability by resisting shock, dust, and rain, and can withstand a 30 drop test.
It is high cost performance:high quality but low sale price.It's available for export worldwide.
Features:
*color lcd monitor & 256 magnification
*compact & light weight
*reversible monitor with control panel on each side
*max. Wind velocity of 15m/s
*8 sec.Splice time, 40 sec.Tube-heat time
*simultaneous x and y views
*large capacity internal battery
*system test ensures the best working condition
*user programmable
*auto check fiber end face
*auto calibrate parameters
*store 8000 groups of splice results
*multiple language options
Specifications:
Applicable fibers: Sm, mm, ds, nz-ds, edf;
Cladding diameter:100 to 150um;
Coating diameter:100 to 1000um;
Fiber cleaved length:8~22mm (standard);
Splicing mode:auto & manual;
Average splice loss:0.02db(sm), 0.01db(mm), 0.04db(ds), 0.04db(nzds);
Return loss:í² 60db;
Environment conditions:-25~50íµ(operation temperature), 0~95%rh (humidity),
0~5000m (altitude);
Storage environment:-40~80íµ(temperature), 0~95úÑrh (humidity);
Protection sleeve length:20mm, 40mm, 60mm;
Tension test:2.0n (standard);
Language: english, chinese, korea, russian, spanish etc;
Interface:rs232 interface & video output;ac adaptor:85í½260v input voltage;
Power supply:internal battery:12v voltage, 10ah, up to 200 times of continuous splices and heats; dc adaptor: 12v voltageú¼optional multipurpose external battery;
Dimensions:170(w)íß140(h)íß170(d) mm;
Weight:3.3kg
Standard carton
279 Fujikura Fusion Splicer Fsm 80S Suppliers
Short on time? Let Fujikura Fusion Splicer Fsm 80S sellers contact you.
