The manufacture capacity per year for tank is 10000 tons and pipe is 20000tons, the max. Specification for tank is dn25000mm and pipe¡¯s specification is dn15mm-dn2000. The products can be strictly manufactured according to standards as din, astm, asme, en, etc. Our company and hundreds of staff are fully committed to serve our clients with traditional and innovative solutions in the demand for storage and transportation of fluids.
Pipes & ducts are manufactured using the "dual helix" filament winding process on computer controlled machines. By adjusting the relative speed of mandrel rotation and glass distribution head movement, helical reinforced layers with different angles can be wound. In order to increase the pipe stiffness, especially on large diameter pipes, silica sand can be added to parallel layers of wall.
Nominal diameter
Nominal size of pipe and fitting is based on internal diameter. The range of available sizes is 25 to 3000 mm.
Nominal pressure classes:
Pipes and fittings are classified according to nominal pressure. Standard pressure classes are 4, 6, 10, 16, 20 and 25 bars. Intermediate or higher-pressure classes are considered on request or depending on the design parameters and conditions
Nominal lengths
Pipes have a length of six meters up to nd150 and 12 meters for bigger diameters.
Fittings
A wide range of fittings as elbows, reducers, tees, caps, flanges etc. Is available.
Fittings are manufactured by the hand lay-up, contact molding and spray-up process. In hand lay-up and contact molding processes veil and alternate layers of mat and woven roving saturated with resin are applied on the mold. In spray-up process continuous strand roving is fed through a chopper gun, combined with catalyzed resin, and sprayed onto the mould surface
Prefabrication spools
Prefabricated spools save installation time as well as costs, freeing the designer from being limited to standard fittings and allowing junction sizes shapes to be specified and manufactured as a better alternative to a complex series of joints.
LANDYOUNG GRP jacking pipes is manufactured in accordance with international standard using Helical FILAMENT winding process and Continuous FILAMENT winding process on computer controlled machines.
DESCRIPTIONS
LANDYOUNG GRP jacking pipes is manufactured in accordance with international standard using Helical FILAMENT winding process and Continuous FILAMENT winding process on computer controlled machines.
GRP jacking pipe is designed to meet the exacting demands of pipeline construction and rehabilitation using trenchless micro-tunnelling and pipe-relining methods.
Applications
LANDYOUNG GRP jacking pipe is suitable for use in pressure, non-pressure and trenchless applications for potable, non-potable, industrial, drainage and wastewater systems.
Water
Sewage & wastewater
Pipe-relining
Road & rail culverts
Asset encasement (e.g. protection for pressure pipelines)
Ducts
Advantages
The GRP Jacking pipe has been engineered to deliver a range of features and benefits that make it suitable for the applications above, including:
Superior axial compressive strength
Excellent hydraulic performance
Light weight and corrosion resistant
Corrosion resistance
Smaller tunnel diameter and reduced spoil volume
Lower jacking forces required during installation
Smaller entry/exit pits
Longer drive lengths
Faster construction time and lower installation costs
Reduced environmental disturbance and social cost
Product Range and properties
Diameters: DN300 DN4000
According to the shape of media, FRP vessels can be divided into three categories of liquid, gas, solid tank; according to the pressure grade, can be divided into two categories of ATM tank and pressure tank; According to shape of vessel, can be divided into three categories of horizontal cylinder tank, vertical cylinder tank, rectangle tank; And PVC/FRP, PP/FRP, PVDF/FRP composite tanks.
Aeron is one of the india's leading producers of molded gratings.Renowned for their high strength, corrosion resistance in the harshest environments, long life and safety. Molded gratings meet the highest international standards.Produced from carefully selected resin system, aeron grating is designed to deliver many years of reliable service, outperforming the traditional materials they replace.
Aeron fiberglass gratings are light weighted, easy to fabricate and install.Their acceptance in many major industries has made them the first choice over steel, not only for their performance but cost competitiveness. Comparable with steel at the installed cost stage, their low maintenance and long life means a significantly lower life cycle cost than that of steel.
Aeron offers wide range of pultruded structural components for industrial and commercial use, including i-beams, wide flange beams, round and square tubes, bars, rods, channels, leg, angles, plate and various custom shapes
We produce and sell steel pipes, carbon steel pipe, GI pipe, carbon steel pipe , SS pipes and Spiral steel pipe in long term.
Our factory have plenty of steel in stock and customers can find the right products.
Circular steel pipe is both openings and have hollow concentric sections of steel larger than the surrounding. The specifications of steel pipes are indicated by appearance dimensions and inner diameter and wall thickness, with a wide range of dimensions from very small diameter capillary to large round steel pipe of several meters in diameter. Round steel pipes can be used for pipelines, thermal equipment, machinery industry, petroleum geological drilling, containers, chemical industry, and special uses. It can be divided into seamless, ERW, LSAW, SSAW steel pipe according to the production process.
We are mainly for customers to provide a variety of pipelines. The pipes we sell include plastic pipes, PVC pipes, HDPE pipes, LDPE pipes, PE pipes, PPR pipes, PC pipes, ABS pipes, PA pipes, PU pipes, hoses, soft tubes, all kinds of plastic granule materials, and recycled regrind materials. Gi pipes, stainless steel pipes, seamless pipes, MS pipes, carbon steel, composited pipes, water tubes, corrugated pipes, fittings, valves, flanges, nuts, and screws. And other environmental plastic and stainless steel pipes
for residential construction households. With meeting international standard quality, the pipes are of different thicknesses, lengths, and applications.
Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings.
According to the application:
1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc.
2. changing the direction of the pipe: bends, bends.
3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe.
4. pipe fittings with additional piping branches: three links, four links.
5. pipe fittings for pipe sealing: gasket, raw material belt, thread, flange blind plate, pipe plug, blind plate, head, welding plug.
6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc.
According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings
According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings.
Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.
