Retrofit controller
Future fit power. It is a simple idea with tremendous effect: Replace your old first-generation Smartpack controller with the Smartpack R to make your power system ready for a high-speed, high-capacity, and connected tomorrow. This retrofit will bring your existing power system in line with current requirements, prolong its lifetime and thereby reduce both the lifetime operating costs and the need for
new investments in power.
InTANK iR2772-S3 has a patented design that allows two 2.5â?� SATA drives to be fitted into one 3.5â?� drive space! Itâ??s equipped with optional RAID 0 to enhance the speed of transfer compare to a regular hard drive or switch to RAID 1 for an efficient and securer data backup.
RAIDON iR2772-S3 internal RAID module supports SATA III 6.0 Gb/s host interface and SATA 22 pin power supply; the connectorâ??s location exactly as the same as a 3.5â?� hard drive. Thus, it is not necessary to install any other brackets but just install the iR2772-S3 inside to existing operating system and then the system will be upgraded as a RAID storage!
iR2772-S3 provides RS232 port, user can monitor the status of the system via their own program.
Model no. iR2772-S3
Interface SATA III 6.0 Gb/s
Support Hard Drive 2Ã?2.5â?� SATA III 6.0Gb/s HDD/SSD
RAID Level RAID 0,1
The Largest Capacity 2TB
Power Supply SATA 15pin (12v/5v)
LED Indicators Yes
Operating System Windows, Linux
Certification CE & FCC
Function Control
Interface GUI (Windows Only)
Packing Content Quick Installation Guide,
Accessory Kit
Dimension 102(W)Ã?26(H)Ã?157(L) mm
Operating temperature 32° to 104° F (0° to 40° C)
Storage temperature -4° to 116° F (-20° to 47° C)
Relative humidity 5% to 95% noncondensing
Applications in these markets demand state-of-the-art, reliable, and safe DC power systems. Flatpack S delivers an industry-leading power density in its segment, many safety functions, a wide operating temperature range, and superb reliability in its small 217mm deep housing.
Used in the 3U rack with Smartpack S controller, the Flatpack S rectifiers cover 2 to 8kW applications using a minimum of space, less than 18 liters, and low heat dissipation.
Eltek Solar Extension Kit - 2U/3U shelf solution
Eltek 3U SOLAR EXT. KIT
Eltek Solar Extension Kit is a compact solution to house up to 4x Solar chargers and for use in new or existing Eltek power systems.
Specially designed with the MC4 connectors for cables from PV panels, service switches, and optional SPDs. The front and rear MC4 connection mechanism enable easy on-site installation into both outdoor and indoor enclosures.
Typical applications are Solar Autonomous and Hybrid power systems.
Controller Model Smartpack2 Touch with the Basic Industrial Controller, and I/O Monitor 2
SCADA Gateway None, DNP3
Visual Alarming Major, Minor, Power On, LCD Display
Remote or Local Monitoring
and Control
Ethernet via web browser
RS232/RS485
Industrial Protocols SNMP V1/V2c and V3, ModBus, ModBus TCP
Inputs/Outputs 6 each, programmable, contacts rated for 1 Amp at 75 Volts (I/O Monitor 2)
3 contacts rated at 0.2A at 125 VDC (Industrial Basic Controller)
Data Logging Up to 10,000 events
Battery Management Auto monitoring/testing life/capacity indications (requires battery connection system listed in options)
Ground Fault Detection Interface via controller
Eltek Micropack 48V/250W Rectifier
Micropack Wallbox
Power Supply System 12V/480W, 24V/960W or 48V/1000W
Compact wall-mounted power supply system
PRODUCT DESCRIPTION
The basic power core has 4 rectifier positions and can be configured as a bulk DC output feed, or integrated 1 or 2 pole distribution.
The power core is prepared for any Micropack rectifier module and the system output can be either of the following: (based on module
choice)
12V/120 480W / 10 40A
24V/240 960W / 10 40A
48V/250 1000W / 5.2 21A
The system has two options for monitoring and control, by the Compack controller, or if the display or extended controller functionality is needed it can be configured with Smartpack2 controller On the lower left side of the box there is space for optional backup batteries
(4x12V/7Ah, only with bulk DC output) .
A simple removable front cover gives good access for installation and connections.
LCD size 26 60 inch without TV.
Built-in with PC motherboard and processor via direct connection running on
8/16/24 bit.
Built-in PC will have minimum Intel
Dual Core/ AMD Athlon processor,2-4
GB memory , 160 -1000 GB HDD,
Windows XP/Windows 2003 Server.
IO port : LAN port, WIFI, Bluetooth,
GSM (optional), USB (2-4),VGA/DVI
HDMI,RS232
Full HIGH Definition (1080p)
Built in with the Audio Amp
Support Wireless compact keyboard and mouse (Bluetooth/RF).
Introduction
1xN rack-mounted optical switch is a kind of functional equipment,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.
Features:
Low Insertion Loss and Fast Switching
SerialNet, High Reliability, High Stability
LCD Display
RS232 Control and Ethernet Remote Management
Applications:
FITL
Automatic Measurement
Optical Network Remote Monitoring
Cable Monitoring and Maintaining system
Introduction
2xN rack-mounted optical switch is a kind of functional device,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.
Features
Low Insertion Loss and Fast Switching
SerialNet, High Reliability, High Stability
LCD Display
RS232 Control and Ethernet Remote Management
Applications
FITL
Automatic Measurement
Optical Network Remote Monitoring
Cable Monitoring and Maintaining system
Ultra mini size with multi-function
Checking, animal weighing , parts counting, percentage, accumulating , weight hold , preset tare
Version:
Mini-e led display with 0.56' ;and 15 led diodes indication
Mini-l lcd display with 0.8' and 25 indication
Parameters:
Plastic front face and steel back
Size:170*78*40mm
Mini-l (0.8â??lcd, 25 indication); mini-e (0.8â??led, 15 indication)
5 function keys
1/60000 high s-? a/d conversion
2 rs232;
4 units: kg , g, lb, oz
8 at 350 ohm load cells connection
Linearity calibration on or off
3.7v2.6ah li rechargeable battery
Extend optional:
Connect to rs232 wireless to connect
With display or pc
Features
1: 3 patents and 2 counts of software copyright registration.
2: Bilingually controlled by computer and embedded system.
3: Highly accurate load cell, Bi-direction test.
4: High performance servo drive.
5: Test speed can be preset freely through software.
6: Selectable load cell: 50N, 100N, 250N, 500N, 1000N.
7: Silence running, < 25db@1000.
8: ISO, ASTM standards test available and non-standard test available.
9: Electronic limit, computer preset, non-mechanical limit.
10: Overload protection, less power consumption.
11: DB9 RS232 communication port .
12: Tensilyst workstation support.
13: Tensile, break force, elastic modulus, seal strength, 90 peeling strength, 180 peeling strength test available.
14: Historical data traceable, system log.
15: 5 degrees user management.
16: Group test, auto multiple curves display, auto statistic calculation.
17: DSM system is optional(Laboratory Management Information System), easy to manage test data.
